On Thu, 2014-09-04 at 18:02 +0200, Arnd Bergmann wrote:
On Thursday 04 September 2014, Paul Bolle wrote:
Ditto for [...] MACH_SMDKC110, and MACH_SMDKV210. Note that here SND_SOC_SMDK_WM8580_PCM can not be set anymore.
[...] I think it would be nice if you could submit a patch to remove the drivers from ASoC, then we can see if anybody complains.
Also the same thing for v3.17-rc5 and next-20140918. So let's see if we can remove this driver too.
Done on top of next-20140918. Again untested. -------->8-------- From: Paul Bolle pebolle@tiscali.nl
Commit 28c8331d386a ("ARM: S5PV210: Remove support for board files") removed the Kconfig symbols MACH_SMDKC110 and MACH_SMDKV210. As a result the dependencies of SND_SOC_SMDK_WM8580_PCM can never be met. So remove the unbuildable "SoC PCM Audio support for WM8580 on SMDK".
Signed-off-by: Paul Bolle pebolle@tiscali.nl --- sound/soc/samsung/Kconfig | 9 -- sound/soc/samsung/Makefile | 2 - sound/soc/samsung/smdk_wm8580pcm.c | 186 ------------------------------------- 3 files changed, 197 deletions(-) delete mode 100644 sound/soc/samsung/smdk_wm8580pcm.c
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 9d9b149ad977..52fd0a446bdf 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -153,15 +153,6 @@ config SND_SOC_SAMSUNG_SMDK_SPDIF help Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
-config SND_SOC_SMDK_WM8580_PCM - tristate "SoC PCM Audio support for WM8580 on SMDK" - depends on SND_SOC_SAMSUNG && (MACH_SMDKV210 || MACH_SMDKC110) - depends on REGMAP_I2C - select SND_SOC_WM8580 - select SND_SAMSUNG_PCM - help - Say Y if you want to add support for SoC audio on the SMDK. - config SND_SOC_SMDK_WM8994_PCM tristate "SoC PCM Audio support for WM8994 on SMDK" depends on SND_SOC_SAMSUNG diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile index c30293a67176..51b471ace06f 100644 --- a/sound/soc/samsung/Makefile +++ b/sound/soc/samsung/Makefile @@ -36,7 +36,6 @@ snd-soc-snow-objs := snow.o snd-soc-smdk-wm9713-objs := smdk_wm9713.o snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o snd-soc-smdk-spdif-objs := smdk_spdif.o -snd-soc-smdk-wm8580pcm-objs := smdk_wm8580pcm.o snd-soc-smdk-wm8994pcm-objs := smdk_wm8994pcm.o snd-soc-speyside-objs := speyside.o snd-soc-tobermory-objs := tobermory.o @@ -61,7 +60,6 @@ obj-$(CONFIG_SND_SOC_SNOW) += snd-soc-snow.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_WM9713) += snd-soc-smdk-wm9713.o obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o -obj-$(CONFIG_SND_SOC_SMDK_WM8580_PCM) += snd-soc-smdk-wm8580pcm.o obj-$(CONFIG_SND_SOC_SMDK_WM8994_PCM) += snd-soc-smdk-wm8994pcm.o obj-$(CONFIG_SND_SOC_SPEYSIDE) += snd-soc-speyside.o obj-$(CONFIG_SND_SOC_TOBERMORY) += snd-soc-tobermory.o diff --git a/sound/soc/samsung/smdk_wm8580pcm.c b/sound/soc/samsung/smdk_wm8580pcm.c deleted file mode 100644 index 63d079303561..000000000000 --- a/sound/soc/samsung/smdk_wm8580pcm.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * sound/soc/samsung/smdk_wm8580pcm.c - * - * Copyright (c) 2011 Samsung Electronics Co. Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/module.h> -#include <sound/soc.h> -#include <sound/pcm_params.h> -#include <sound/pcm.h> - -#include <asm/mach-types.h> - -#include "../codecs/wm8580.h" -#include "dma.h" -#include "pcm.h" - -/* - * Board Settings: - * o '1' means 'ON' - * o '0' means 'OFF' - * o 'X' means 'Don't care' - * - * SMDK6410 Base B/D: CFG1-0000, CFG2-1111 - * SMDKC110, SMDKV210: CFGB11-100100, CFGB12-0000 - */ - -#define SMDK_WM8580_EXT_OSC 12000000 -#define SMDK_WM8580_EXT_MCLK 4096000 -#define SMDK_WM8580_EXT_VOICE 2048000 - -static unsigned long mclk_freq; -static unsigned long xtal_freq; - -/* - * If MCLK clock directly gets from XTAL, we don't have to use PLL - * to make MCLK, but if XTAL clock source connects with other codec - * pin (like XTI), we should have to set codec's PLL to make MCLK. - * Because Samsung SoC does not support pcmcdclk output like I2S. - */ - -static int smdk_wm8580_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_dai *codec_dai = rtd->codec_dai; - struct snd_soc_dai *cpu_dai = rtd->cpu_dai; - int rfs, ret; - - switch (params_rate(params)) { - case 8000: - break; - default: - printk(KERN_ERR "%s:%d Sampling Rate %u not supported!\n", - __func__, __LINE__, params_rate(params)); - return -EINVAL; - } - - rfs = mclk_freq / params_rate(params) / 2; - - /* Set the codec DAI configuration */ - ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B - | SND_SOC_DAIFMT_IB_NF - | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - /* Set the cpu DAI configuration */ - ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B - | SND_SOC_DAIFMT_IB_NF - | SND_SOC_DAIFMT_CBS_CFS); - if (ret < 0) - return ret; - - if (mclk_freq == xtal_freq) { - ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_MCLK, - mclk_freq, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK, - WM8580_CLKSRC_MCLK); - if (ret < 0) - return ret; - } else { - ret = snd_soc_dai_set_sysclk(codec_dai, WM8580_CLKSRC_PLLA, - mclk_freq, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_clkdiv(codec_dai, WM8580_MCLK, - WM8580_CLKSRC_PLLA); - if (ret < 0) - return ret; - - ret = snd_soc_dai_set_pll(codec_dai, WM8580_PLLA, 0, - xtal_freq, mclk_freq); - if (ret < 0) - return ret; - } - - /* Set PCM source clock on CPU */ - ret = snd_soc_dai_set_sysclk(cpu_dai, S3C_PCM_CLKSRC_MUX, - mclk_freq, SND_SOC_CLOCK_IN); - if (ret < 0) - return ret; - - /* Set SCLK_DIV for making bclk */ - ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_PCM_SCLK_PER_FS, rfs); - if (ret < 0) - return ret; - - return 0; -} - -static struct snd_soc_ops smdk_wm8580_pcm_ops = { - .hw_params = smdk_wm8580_pcm_hw_params, -}; - -static struct snd_soc_dai_link smdk_dai[] = { - { - .name = "WM8580 PAIF PCM RX", - .stream_name = "Playback", - .cpu_dai_name = "samsung-pcm.0", - .codec_dai_name = "wm8580-hifi-playback", - .platform_name = "samsung-audio", - .codec_name = "wm8580.0-001b", - .ops = &smdk_wm8580_pcm_ops, - }, { - .name = "WM8580 PAIF PCM TX", - .stream_name = "Capture", - .cpu_dai_name = "samsung-pcm.0", - .codec_dai_name = "wm8580-hifi-capture", - .platform_name = "samsung-pcm.0", - .codec_name = "wm8580.0-001b", - .ops = &smdk_wm8580_pcm_ops, - }, -}; - -static struct snd_soc_card smdk_pcm = { - .name = "SMDK-PCM", - .owner = THIS_MODULE, - .dai_link = smdk_dai, - .num_links = 2, -}; - -/* - * After SMDKC110 Base Board's Rev is '0.1', 12MHz External OSC(X1) - * is absent (or not connected), so we connect EXT_VOICE_CLK(OSC4), - * 2.0484Mhz, directly with MCLK both Codec and SoC. - */ -static int snd_smdk_probe(struct platform_device *pdev) -{ - int ret = 0; - - xtal_freq = SMDK_WM8580_EXT_OSC; - mclk_freq = SMDK_WM8580_EXT_MCLK; - - if (machine_is_smdkc110() || machine_is_smdkv210()) - xtal_freq = mclk_freq = SMDK_WM8580_EXT_VOICE; - - smdk_pcm.dev = &pdev->dev; - ret = devm_snd_soc_register_card(&pdev->dev, &smdk_pcm); - if (ret) - dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret); - - return ret; -} - -static struct platform_driver snd_smdk_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "samsung-smdk-pcm", - }, - .probe = snd_smdk_probe, -}; - -module_platform_driver(snd_smdk_driver); - -MODULE_AUTHOR("Sangbeom Kim, sbkim73@samsung.com"); -MODULE_DESCRIPTION("ALSA SoC SMDK WM8580 for PCM"); -MODULE_LICENSE("GPL");