On 04/18/2013 12:02 AM, yuvaraj r wrote:
Hi All,
I have two different dais
Hifi Multimedia
Voice call dai
Before opening voice call dai. I closed Hifi stream. After 5 sec Voice call stream dapm widget got powered off automatically. I am assuming that stream close event of Multimedia causing problem.
What will issue in my cause.
The value of snd_soc_card::pmdown_time and snd_soc_pcm_runtime::pmdown_time are initialized to 5000 (i.e. 5 secs) by default. That means that after you close a stream, the kernel waits 5 seconds and then powers everything down.
There's a few reasons why this can happen:
1. Your DAPM routing doesn't adequately cover the Voice call case. Something that is needed for both Voice and Multimedia isn't properly associated with the Voice routing... so DAPM shuts it down because it's not "in use."
2. Some of your power-down code is making a poor assumption. I.e. you're making some decisions outside of DAPM about when a component should be powered down, and it's the wrong decision.
3. I've seen a bug in older kernels (e.g. <= 3.1) where the DAPM logic will accidentally shut down a capture stream while powering down a playback stream. (E.g. see http://review.omapzoom.org/#/c/21405/)
A quick work-around is to set pmdown_time = 0. However, there will still be a race condition... so don't consider it "fixed." (Though, I'm pretty sure I've seen a device ship with this "fix." :-))
-gabriel