Re: [PATCH v2 1/2] ASoC: add support for TAS5805M digital amplifier

On 1/11/2022 12:53 AM, Daniel Beer wrote:

The Texas Instruments TAS5805M is a class D audio amplifier with an integrated DSP. DSP configuration is expected to be supplied via a device-tree attribute containing a sequence of register writes.

These register writes set up application-specific DSP settings and are expected to be generated using TI's PPC3 tool.

Signed-off-by: Daniel Beer daniel.beer@igorinstitute.com

...

+static int tas5805m_vol_put(struct snd_kcontrol *kcontrol,

• 	    struct snd_ctl_elem_value *ucontrol)
  

+{

• struct snd_soc_component *component =

• snd_soc_kcontrol_component(kcontrol);
  

• struct tas5805m_priv *tas5805m =

• snd_soc_component_get_drvdata(component);
  

• if (!(volume_is_valid(ucontrol->value.integer.value[0]) &&

•      volume_is_valid(ucontrol->value.integer.value[1])))
  

• return -EINVAL;
  

• mutex_lock(&tas5805m->lock);
• tas5805m->vol[0] = ucontrol->value.integer.value[0];
• tas5805m->vol[1] = ucontrol->value.integer.value[1];
• dev_dbg(component->dev, "set vol=%d/%d (is_powered=%d)\n",

• tas5805m->vol[0], tas5805m->vol[1], tas5805m->is_powered);
  

• if (tas5805m->is_powered)

• tas5805m_refresh_unlocked(component);
  

• mutex_unlock(&tas5805m->lock);
• return 0;

+}

put method should return '1' if value changed, so ALSA knows to inform userspace utilities about change. You can check if userspace is notified of changes with "alsactl monitor", you should see something like: node hw:2, #3 (2,0,0,ADC0 Capture Volume,0) VALUE when value changes.