Hi,
On Wed, Mar 18, 2009 at 10:19:53AM +0100, Takashi Iwai wrote:
At Wed, 18 Mar 2009 10:05:07 +0100, Andreas Mohr wrote:
Hi,
On Tue, Mar 17, 2009 at 09:32:16PM +0100, Takashi Iwai wrote:
Don't use -Dplughw:0. Then the default setup will be used.
% arecord -fdat -c1 test.wav
Tried that, didn't help. /usr/share/alsa/cards/HDA-Intel.conf still contains the patch, but equal Capture Volume sliders still silenced audio input, whereas non-equal worked. Hmm.
What is the output with -v option?
Sorry for the delay!
$ arecord -fdat -c1 -v test.wav; aplay test.wav Recording WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono ALSA <-> PulseAudio PCM I/O Plugin Its setup is: stream : CAPTURE access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 1 rate : 48000 exact rate : 48000 (48000/1) msbits : 16 buffer_size : 24000 period_size : 6000 period_time : 125000 tstamp_mode : NONE period_step : 1 avail_min : 6000 period_event : 0 start_threshold : 1 stop_threshold : 24000 silence_threshold: 0 silence_size : 0 boundary : 1572864000 ^CAborted by signal Interrupt... Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono andi@andinet:/tmp$
Hmm. Note the pulseaudio stuff above...
I did verify that this test run using -v did exhibit failure again.
Thanks,
Andreas