From: Jeeja KP jeeja.kp@intel.com
If copier instance is connected to a DMA gateway then driver needs to configure the gateway configuration otherwise set it to invalid. This patch sets the non gateway copier node value to invalid.
Signed-off-by: Dharageswari.R dharageswari.r@intel.com Signed-off-by: Jeeja KP jeeja.kp@intel.com Signed-off-by: Vinod Koul vinod.koul@intel.com --- sound/soc/intel/skylake/skl-messages.c | 8 +++++++- sound/soc/intel/skylake/skl-tplg-interface.h | 1 + 2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index a1001a686aa9..50a109503a3f 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -321,6 +321,7 @@ static void skl_copy_copier_caps(struct skl_module_cfg *mconfig, (mconfig->formats_config.caps_size) / 4; }
+#define SKL_NON_GATEWAY_CPR_NODE_ID 0xFFFFFFFF /* * Calculate the gatewat settings required for copier module, type of * gateway and index of gateway to use @@ -367,13 +368,18 @@ static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx, node_id.node.vindex = params->link_dma_id; break;
- default: + case SKL_DEVICE_HDAHOST: node_id.node.dma_type = (SKL_CONN_SOURCE == mconfig->hw_conn_type) ? SKL_DMA_HDA_HOST_OUTPUT_CLASS : SKL_DMA_HDA_HOST_INPUT_CLASS; node_id.node.vindex = params->host_dma_id; break; + + default: + cpr_mconfig->gtw_cfg.node_id = SKL_NON_GATEWAY_CPR_NODE_ID; + cpr_mconfig->cpr_feature_mask = 0; + return; }
cpr_mconfig->gtw_cfg.node_id = node_id.val; diff --git a/sound/soc/intel/skylake/skl-tplg-interface.h b/sound/soc/intel/skylake/skl-tplg-interface.h index d14f7fe64aa8..718d3d5df9a8 100644 --- a/sound/soc/intel/skylake/skl-tplg-interface.h +++ b/sound/soc/intel/skylake/skl-tplg-interface.h @@ -106,6 +106,7 @@ enum skl_dev_type { SKL_DEVICE_I2S = 0x2, SKL_DEVICE_SLIMBUS = 0x3, SKL_DEVICE_HDALINK = 0x4, + SKL_DEVICE_HDAHOST = 0x5, SKL_DEVICE_NONE };