On Sun, Nov 01, 2020 at 04:27:05PM +0100, Clément Péron wrote:
On Wed, 30 Sep 2020 at 12:19, Maxime Ripard maxime@cerno.tech wrote:
On Mon, Sep 28, 2020 at 04:27:42PM +0200, Clément Péron wrote:
On Mon, 28 Sep 2020 at 10:43, Maxime Ripard maxime@cerno.tech wrote:
On Mon, Sep 21, 2020 at 08:37:09PM +0200, Jernej Škrabec wrote:
Dne ponedeljek, 21. september 2020 ob 19:23:49 CEST je Clément Péron napisal(a):
Hi Maxime,
On Mon, 21 Sep 2020 at 15:59, Maxime Ripard maxime@cerno.tech wrote: > > On Mon, Sep 21, 2020 at 12:27:18PM +0200, Clément Péron wrote: > > From: Jernej Skrabec jernej.skrabec@siol.net > > > > Add a simple-soundcard to link audio between HDMI and I2S. > > > > Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net > > Signed-off-by: Marcus Cooper codekipper@gmail.com > > Signed-off-by: Clément Péron peron.clem@gmail.com > > --- > > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 33 ++++++++++++++++++++ > > 1 file changed, 33 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/
boot/dts/allwinner/sun50i-h6.dtsi
> > index 28c77d6872f6..a8853ee7885a 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi > > @@ -67,6 +67,25 @@ de: display-engine { > > status = "disabled"; > > }; > > > > + hdmi_sound: hdmi-sound { > > + compatible = "simple-audio-card"; > > + simple-audio-card,format = "i2s"; > > + simple-audio-card,name = "sun50i-h6-hdmi"; > > + simple-audio-card,mclk-fs = <128>; > > + simple-audio-card,frame-inversion; > > + status = "disabled"; > > + > > + simple-audio-card,codec { > > + sound-dai = <&hdmi>; > > + }; > > + > > + simple-audio-card,cpu { > > + sound-dai = <&i2s1>; > > + dai-tdm-slot-num = <2>; > > + dai-tdm-slot-width = <32>; > > It looks weird to have both some TDM setup here, and yet the format in > i2s?
I was looking at sound documentation regarding how I can properly write the multi-lane I2S support. And I think we made a wrong interpretation here.
TDM slot-num and slot-width are not referencing the format called PCM or DSP_A / DSP_B. But really the physical time division representation of a format.
For example Amlogic do the following representation for Multi-lane I2S:
dai-link-7 { sound-dai = <&tdmif_b>; dai-format = "i2s"; dai-tdm-slot-tx-mask-0 = <1 1>; dai-tdm-slot-tx-mask-1 = <1 1>; dai-tdm-slot-tx-mask-2 = <1 1>; dai-tdm-slot-tx-mask-3 = <1 1>; mclk-fs = <256>;
codec { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; };};
So i think for 2 channels HDMI using the simple sound card with TDM property is not a hack but the correct way to represent it.
Do you agree ?
If so, can I resend the simple sound card for HDMI audio ?
I mean, it's not less weird :)
And like I said before we still have the option to write a card driver ourselves that doesn't take anything from the DT beside the phandle of the i2s controller and the HDMI controller.
If it's a fixed configuration, I'm not sure why we bother trying to make it dynamic in the DT.
Maxime