On Wed, 28 Feb 2024 08:41:38 +0100, songxiebing wrote:
From: songxiebing songxiebing@kylinos.cn
In azx_probe_codecs function，when bus->codec_mask is becomes to 0(no codecs), execute azx_init_chip, bus->codec_mask will be initialized to a value again， this causes snd_hda_codec_new function to run, the process is as follows: -->snd_hda_codec_new -->snd_hda_codec_device_init -->snd_hdac_device_init---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s ---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s ---snd_hdac_read_parm(...AC_PAR_SUBSYSTEM_ID) 2s ---snd_hdac_read_parm(...AC_PAR_REV_ID) 2s ---snd_hdac_read_parm(...AC_PAR_NODE_COUNT) 2s when no codecs, read communication is error, each command will be polled for 2 second，a total of 10s, it is easy to some problem. like this: 2 [ 14.833404][ 6] [ T164] hda 0006:00: Codec #0 probe error; disabling it... 3 [ 14.844178][ 6] [ T164] hda 0006:00: codec_mask = 0x1 4 [ 14.880532][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000 5 [ 15.891988][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000 6 [ 16.978090][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0001 7 [ 18.140895][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0002 8 [ 19.135516][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0004 10 [ 19.900086][ 6] [ T164] hda 0006:00: no codecs initialized 11 [ 45.573398][ 2] [ C2] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [kworker/2:0:25]
Here, when bus->codec_mask is 0, use a direct break to avoid execute snd_hda_codec_new function.
Signed-off-by: songxiebing songxiebing@kylinos.cn
Thanks for the patch. The code change looks OK, but you use both ASCII and non-ASCII comma letters in the patch description. Could you try to keep only ASCII letters?
Takashi