Add audio devices nodes including SAI, MICFIL, XCVR and MQS.
Signed-off-by: Chancel Liu chancel.liu@nxp.com --- arch/arm64/boot/dts/freescale/imx93.dtsi | 87 ++++++++++++++++++++++++ 1 file changed, 87 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi index ceccf4766440..9a7bff39519c 100644 --- a/arch/arm64/boot/dts/freescale/imx93.dtsi +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi @@ -171,6 +171,18 @@ cm33: remoteproc-cm33 { status = "disabled"; };
+ mqs1: mqs1 { + compatible = "fsl,imx93-mqs"; + gpr = <&aonmix_ns_gpr>; + status = "disabled"; + }; + + mqs2: mqs2 { + compatible = "fsl,imx93-mqs"; + gpr = <&wakeupmix_gpr>; + status = "disabled"; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -367,6 +379,19 @@ flexcan1: can@443a0000 { status = "disabled"; };
+ sai1: sai@443b0000 { + compatible = "fsl,imx93-sai"; + reg = <0x443b0000 0x10000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma1 22 0 1>, <&edma1 21 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + iomuxc: pinctrl@443c0000 { compatible = "fsl,imx93-iomuxc"; reg = <0x443c0000 0x10000>; @@ -447,6 +472,23 @@ tmu: tmu@44482000 { #thermal-sensor-cells = <1>; };
+ micfil: micfil@44520000 { + compatible = "fsl,imx93-micfil"; + reg = <0x44520000 0x10000>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_PDM_IPG>, + <&clk IMX93_CLK_PDM_GATE>, + <&clk IMX93_CLK_AUDIO_PLL>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "clkext3"; + dmas = <&edma1 29 0 5>; + dma-names = "rx"; + status = "disabled"; + };
adc1: adc@44530000 { compatible = "nxp,imx93-adc"; @@ -738,6 +780,51 @@ flexspi1: spi@425e0000 { status = "disabled"; };
+ sai2: sai@42650000 { + compatible = "fsl,imx93-sai"; + reg = <0x42650000 0x10000>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma2 59 0 1>, <&edma2 58 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@42660000 { + compatible = "fsl,imx93-sai"; + reg = <0x42660000 0x10000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&edma2 61 0 1>, <&edma2 60 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + xcvr: xcvr@42680000 { + compatible = "fsl,imx93-xcvr"; + reg = <0x42680000 0x800>, + <0x42680800 0x400>, + <0x42680c00 0x080>, + <0x42680e00 0x080>; + reg-names = "ram", "regs", "rxfifo", "txfifo"; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_SPDIF_GATE>, + <&clk IMX93_CLK_DUMMY>, + <&clk IMX93_CLK_AUD_XCVR_GATE>; + clock-names = "ipg", "phy", "spba", "pll_ipg"; + dmas = <&edma2 65 0 1>, <&edma2 66 0 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lpuart7: serial@42690000 { compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42690000 0x1000>;