Without this change the BTL speaker produces some "distortion" noise when test program (speaker-test -t waw) is ended with ctrl+c.
As our design uses speaker outputs to drive BTL speaker, it was necessary to also mute the speaker via the codec internal WM8940_SPKVOL register with setting WM8940_SPKMUTE bit.
Signed-off-by: Lukasz Majewski lukma@denx.de --- sound/soc/codecs/wm8940.c | 11 ++++++++++- sound/soc/codecs/wm8940.h | 3 +++ 2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c index 6fb1c3780439..a8596f4089dd 100644 --- a/sound/soc/codecs/wm8940.c +++ b/sound/soc/codecs/wm8940.c @@ -465,9 +465,18 @@ static int wm8940_mute(struct snd_soc_dai *dai, int mute, int direction) { struct snd_soc_component *component = dai->component; u16 mute_reg = snd_soc_component_read(component, WM8940_DAC) & 0xffbf; + u16 spkvol_reg = snd_soc_component_read(component, WM8940_SPKVOL); + int ret;
- if (mute) + spkvol_reg &= ~WM8940_SPKMUTE; + if (mute) { mute_reg |= 0x40; + spkvol_reg |= WM8940_SPKMUTE; + } + + ret = snd_soc_component_write(component, WM8940_SPKVOL, spkvol_reg); + if (ret) + return ret;
return snd_soc_component_write(component, WM8940_DAC, mute_reg); } diff --git a/sound/soc/codecs/wm8940.h b/sound/soc/codecs/wm8940.h index 0d4f53ada2e6..eb051ed29bb8 100644 --- a/sound/soc/codecs/wm8940.h +++ b/sound/soc/codecs/wm8940.h @@ -95,5 +95,8 @@ struct wm8940_setup_data { #define WM8940_OPCLKDIV_3 2 #define WM8940_OPCLKDIV_4 3
+/* Bit definitions */ +#define WM8940_SPKMUTE BIT(6) + #endif /* _WM8940_H */