From: Conor Dooley conor.dooley@microchip.com
Testing & checking the Canaan devicetrees is inconvenient as only the devicetree corresponding to SOC_CANAAN_K210_DTB_BUILTIN will be built. Change the Makefile so that all devicetrees are built by default if SOC_CANAAN but only the one specified by SOC_CANAAN_K210_DTB_BUILTIN gets built as an object.
Signed-off-by: Conor Dooley conor.dooley@microchip.com --- I don't have any Canaan hardware, but I build tested it and the log looked correct with arch/riscv/boot/dts/canaan/k210_generic.dtb.o getting successfully built. --- arch/riscv/boot/dts/canaan/Makefile | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/boot/dts/canaan/Makefile b/arch/riscv/boot/dts/canaan/Makefile index c61b08ac8554..befe4eb7527b 100644 --- a/arch/riscv/boot/dts/canaan/Makefile +++ b/arch/riscv/boot/dts/canaan/Makefile @@ -1,3 +1,9 @@ # SPDX-License-Identifier: GPL-2.0 -dtb-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE)) -obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y)) +dtb-$(CONFIG_SOC_CANAAN) += canaan_kd233.dtb +dtb-$(CONFIG_SOC_CANAAN) += k210_generic.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_bit.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_dock.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maix_go.dtb +dtb-$(CONFIG_SOC_CANAAN) += sipeed_maixduino.dtb + +obj-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += $(addsuffix .dtb.o, $(CONFIG_SOC_CANAAN_K210_DTB_SOURCE))