Thanks for the response,
I did cat /proc/asound/card0/codec#0
and got the following output: (I have bolded the relevant information)
Codec: Conexant CX20561 (Hermosa) Address: 0 Function Id: 0x1 Vendor Id: 0x14f15051 Subsystem Id: 0x17aa211c Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0 Amp-Out vals: [0x1f 0x1f] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power: setting=D0, actual=D0 Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=0 Amp-Out vals: [0x4a 0x4a] Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power: setting=D0, actual=D0 Node 0x12 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0 Amp-In vals: [0x44 0x44] [0x44 0x44] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power: setting=D0, actual=D0 Connection: 2 0x1d* 0x17 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0 Amp-In vals: [0x44 0x44] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power: setting=D0, actual=D0 Connection: 1 0x18 Node 0x16 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0000001c: OUT HP Detect Pin Default 0x022140f0: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0xc0: OUT HP Unsolicited: tag=37, enabled=1 Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x17 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Pincap 0x00001224: IN Detect Vref caps: 50 80 Pin Default 0x61a190f0: [N/A] Mic at Sep Rear Conn = 1/8, Color = Pink DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=38, enabled=1 Power: setting=D0, actual=D0 Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-In vals: [0x03 0x03] Pincap 0x00001224: IN Detect Vref caps: 50 80 Pin Default 0x02a190f0: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=39, enabled=1 Power: setting=D0, actual=D0 Node 0x19 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x00000014: OUT Detect Pin Default 0x40f000f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=37, enabled=1 Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1a [Pin Complex] wcaps 0x400501: Stereo Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x901701f0: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1b [Pin Complex] wcaps 0x400500: Mono Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Power: setting=D0, actual=D0 Connection: 2 0x10* 0x11 Node 0x1c [Pin Complex] wcaps 0x400701: Stereo Digital Pincap 0x00000010: OUT Pin Default 0x40f001f0: [N/A] Other at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Power: setting=D0, actual=D0 Connection: 1 0x12 Node 0x1d [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x03 0x03] Pincap 0x00000020: IN Pin Default 0x90a601f0: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power: setting=D0, actual=D0 Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono
It looks like it is already enabled and set to OUT.
How do I enable the pin with a one line verb? Do I write option connexant 5051 to modprobe.d/alsabase.conf?
________________________________ From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com To: alsa-devel@alsa-project.org Sent: Friday, April 6, 2012 10:09 AM Subject: Re: [alsa-devel] Alsa support for conexant
Is there anyway I can get it to output through SPDIF? My other computer that has SPDIF outputs fine using the custom asound.conf so why isn't it working for the lenovo? BTW, I confirmed the SPDIF is not defective by booting into Windows and testing it.
Can you check if the SPDIF pin is actually enabled (look at /proc/asound/cardxx/codec#xx) as OUT. I had a similar problem a long time ago on a Lenovo W500, enabling the pin with a one-line verb for the connexant 5051 solved the problem.
_______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel