This adds the Document for Freescale SAI driver under Documentation/devicetree/bindings/sound/.
Signed-off-by: Xiubo Li Li.Xiubo@freescale.com --- .../devicetree/bindings/sound/fsl-sai.txt | 40 ++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl-sai.txt
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt new file mode 100644 index 0000000..ca49ad1 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -0,0 +1,40 @@ +Freescale Synchronous Audio Interface (SAI). + +The SAI is based on I2S module that used communicating with audio codecs, +which provides a synchronous audio interface that supports fullduplex +serial interfaces with frame synchronization such as I2S, AC97, TDM, and +codec/DSP interfaces. + + +Required properties: +- compatible: Compatible list, contains "fsl,vf610-sai". +- reg: Offset and length of the register set for the device. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names : Must include the "sai" entry. +- dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. +- dma-names : Two dmas have to be defined, "tx" and "rx". +- pinctrl-names: Must contain a "default" entry. +- pinctrl-NNN: One property must exist for each entry in pinctrl-names. + See ../pinctrl/pinctrl-bindings.txt for details of the property values. +- big-endian-regs: If this property is absent, the little endian mode will + be in use as default, or the big endian mode will be in use for all the + device registers. +- big-endian-data: If this property is absent, the little endian mode will + be in use as default, or the big endian mode will be in use for all the + fifo data. + +Example: +sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2_1>; + clocks = <&clks VF610_CLK_SAI2>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, + <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>; + big-endian_regs; + big-endian_data; +};