Hi Andrew.
pnp-do-not-stop-start-devices-in-suspend-resume-path.patch in current -mm breaks resuming isapnp cards from hibernation. They need the pnp_start_dev to enable the device again after hibernation.
They don't really need the pnp_stop_dev() which the above mentioned patch also removes but with the pnp_start_dev() restored it seems pnp_stop_dev() should also stay. Bjorn Helgaas should decide -- currently the patch as you have it breaks drivers though. Could you drop it?
Then, if so and after you do that, could you apply the attached? That's also needed to resume (ALSA) ISA-PnP cards from hibernation due to the RES_DO_NOT_CHANGE test triggering for ALSA drivers and the pnp_start_dev() still not happening. More in the changelog...
On 12-01-08 20:08, Rafael J. Wysocki wrote:
On Saturday, 12 of January 2008, Rene Herman wrote:
It seems all PnP drivers would need to stick a pnp_start_dev in their resume method
Yes.
then which means it really belongs in core.
Yes, if practical.
One important point where PnP and PCI differ is that PnP allows to change the resources on a protocol level and I don't see how it could ever not be necessary to restore the state a user may have set if power has been removed. Hibernate is just that, isn't it?
Basically, yes, it is.
Rene.
commit 7d16e8b3e7739599d32c8006f9e84fadb86b8296 Author: Rene Herman rene.herman@gmail.com Date: Sat Jan 12 00:00:35 2008 +0100
PNP: do not test PNP_DRIVER_RES_DO_NOT_CHANGE on suspend/resume
The PNP_DRIVER_RES_DO_NOT_CHANGE flag is meant to signify that the PNP core should not change resources for the device -- not that it shouldn't disable/enable the device on suspend/resume.
ALSA ISAPnP drivers set PNP_DRIVER_RES_DO_NOT_CHANAGE (0x0001) through setting PNP_DRIVER_RES_DISABLE (0x0003). The latter including the former may in itself be considered rather unexpected but doesn't change that suspend/resume wouldn't seem to have any business testing the flag.
As reported by Ondrej Zary for snd-cs4236, ALSA driven ISAPnP cards don't survive swsusp hibernation with the resume skipping setting the resources due to testing the flag -- the same test in the suspend path isn't enough to keep hibernation from disabling the card it seems.
These tests were added (in 2005) by Piere Ossman in commit 68094e3251a664ee1389fcf179497237cbf78331, "alsa: Improved PnP suspend support" who doesn't remember why. This deletes them.
Signed-off-by: Rene Herman rene.herman@gmail.com Tested-by: Ondrej Zary linux@rainbow-software.org
diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c index a262762..12a1645 100644 --- a/drivers/pnp/driver.c +++ b/drivers/pnp/driver.c @@ -161,8 +161,7 @@ static int pnp_bus_suspend(struct device *dev, pm_message_t state) return error; }
- if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE) && - pnp_can_disable(pnp_dev)) { + if (pnp_can_disable(pnp_dev)) { error = pnp_stop_dev(pnp_dev); if (error) return error; @@ -185,14 +184,17 @@ static int pnp_bus_resume(struct device *dev) if (pnp_dev->protocol && pnp_dev->protocol->resume) pnp_dev->protocol->resume(pnp_dev);
- if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) { + if (pnp_can_write(pnp_dev)) { error = pnp_start_dev(pnp_dev); if (error) return error; }
- if (pnp_drv->resume) - return pnp_drv->resume(pnp_dev); + if (pnp_drv->resume) { + error = pnp_drv->resume(pnp_dev); + if (error) + return error; + }
return 0; }