Many thanks for reviewing v7 This version addresses all the comments raised as part of v8 review.
This patchset adds ASoC driver support to configure signal processing framework ("AudioReach") which is integral part of Qualcomm next generation audio SDK and will be deployed on upcoming Qualcomm chipsets. It makes use of ASoC Topology to load graphs on to the DSP which is then managed by APM (Audio Processing Manager) service to prepare/start/stop.
Here is simplified high-level block diagram of AudioReach:
___________________________________________________________ | CPU (Application Processor) | | +---------+ +---------+ +----------+ | | | q6apm | | q6apm | | q6apm | | | | dais | <------> | | <-----> |lpass-dais| | | +---------+ +---------+ +----------+ | | ^ ^ | | | | +---------+ | | +---------+ v +---------->|topology | | | | q6prm | +---------+ | | | | | |<-------->| GPR | +---------+ | | +---------+ +---------+ | | ^ ^ | | | | | | +----------+ | | | | q6prm | | | | |lpass-clks| | | | +----------+ | | |____________________________|______________________________| | | RPMSG (IPC over GLINK) ____________________________|______________________________ | | | | +-----------------------+ | | | | | | v v q6 (Audio DSP) | |+-----+ +----------------------------------+ | || PRM | | APM (Audio Processing Manager) | | |+-----+ | . Graph Management | | | | . Command Handing | | | | . Event Management | | | | ... | | | +----------------------------------+ | | ^ | |____________________________|______________________________| | | LPASS AIF ____________________________|______________________________ | | Audio I/O | | v | | +--------------------------------------------------+ | | | Audio devices | | | | CODEC | HDMI-TX | PCM | SLIMBUS | I2S |MI2S |...| | | | | | | +--------------------------------------------------+ | |___________________________________________________________|
AudioReach has constructs of sub-graph, container and modules. Each sub-graph can have N containers and each Container can have N Modules and connections between them can be linear or non-linear. An audio function can be realized with one or many connected sub-graphs. There are also control/event paths between modules that can be wired up while building graph to achieve various control mechanism between modules. These concepts of Sub-Graph, Containers and Modules are represented in ASoC topology.
Here is simple I2S graph with a Write Shared Memory and a Volume control module within a single Subgraph (1) with one Container (1) and 5 modules.
____________________________________________________________ | Sub-Graph [1] | | _______________________________________________________ | | | Container [1] | | | | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]-> [I2S-EP]| | | |_______________________________________________________| | |____________________________________________________________|
For now this graph is split into two subgraphs to achieve dpcm like below: ________________________________________________ _________________ | Sub-Graph [1] | | Sub-Graph [2] | | ____________________________________________ | | _____________ | | | Container [1] | | | |Container [2]| | | | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]| | | | [I2S-EP] | | | |____________________________________________| | | |_____________| | |________________________________________________| |_________________|
_________________ | Sub-Graph [3] | | _____________ | | |Container [3]| | | | [DMA-EP] | | | |_____________| | |_________________|
This patchset adds very minimal support for AudioReach which includes supporting sub-graphs containing CODEC DMA ports and simple PCM Decoder/Encoder and Logger Modules. Additional capabilities will be built over time to expose features offered by AudioReach.
This patchset is Tested on SM8250 SoC based Qualcomm Robotics Platform RB5 and SM9250 MTP with WSA881X Smart Speaker Amplifiers, DMICs connected via VA Macro and WCD938x Codec connected via TX and RX Macro and HDMI audio via I2S.
First 10 Patches are mostly reorganization existing Old QDSP Audio Framework code and bindings so that we could reuse them on AudioReach.
ASoC topology graphs for DragonBoard RB5 and SM8250 MTP are available at https://git.linaro.org/people/srinivas.kandagatla/audioreach-topology.git/ and Qualcomm AudioReach DSP headers are available at: https://source.codeaurora.org/quic/la/platform/vendor/opensource/arspf-heade...
Note: There is one false positive warning in this patchset: audioreach.c:80:45: warning: array of flexible structures
Thanks, srini
Changes since v7: - removed returning errors in dsp command callbacks as it has no effect - removed uncessary err prints - removed default topology file as its impossible to have one for all boards. - removed references of Elite in commit log - return correct error codes returned from functions.
Srinivas Kandagatla (22): soc: dt-bindings: qcom: apr: convert to yaml soc: dt-bindings: qcom: apr: deprecate qcom,apr-domain property soc: qcom: apr: make code more reuseable soc: dt-bindings: qcom: add gpr bindings soc: qcom: apr: Add GPR support ASoC: dt-bindings: move LPASS dai related bindings out of q6afe ASoC: dt-bindings: move LPASS clocks related bindings out of q6afe ASoC: dt-bindings: rename q6afe.h to q6dsp-lpass-ports.h ASoC: qdsp6: q6afe-dai: move lpass audio ports to common file ASoC: qdsp6: q6afe-clocks: move audio-clocks to common file ASoC: dt-bindings: q6dsp: add q6apm-lpass-dai compatible ASoC: dt-bindings: lpass-clocks: add q6prm clocks compatible ASoC: dt-bindings: add q6apm digital audio stream bindings ASoC: qdsp6: audioreach: add basic pkt alloc support ASoC: qdsp6: audioreach: add q6apm support ASoC: qdsp6: audioreach: add module configuration command helpers ASoC: qdsp6: audioreach: add Kconfig and Makefile ASoC: qdsp6: audioreach: add topology support ASoC: qdsp6: audioreach: add q6apm-dai support ASoC: qdsp6: audioreach: add q6apm lpass dai support ASoC: qdsp6: audioreach: add q6prm support ASoC: qdsp6: audioreach: add support for q6prm-clocks
.../devicetree/bindings/soc/qcom/qcom,apr.txt | 134 -- .../bindings/soc/qcom/qcom,apr.yaml | 177 +++ .../devicetree/bindings/sound/qcom,q6afe.txt | 181 --- .../bindings/sound/qcom,q6apm-dai.yaml | 53 + .../sound/qcom,q6dsp-lpass-clocks.yaml | 77 ++ .../sound/qcom,q6dsp-lpass-ports.yaml | 205 +++ drivers/soc/qcom/Kconfig | 2 +- drivers/soc/qcom/apr.c | 287 ++++- include/dt-bindings/soc/qcom,gpr.h | 19 + include/dt-bindings/sound/qcom,q6afe.h | 203 +-- .../sound/qcom,q6dsp-lpass-ports.h | 208 +++ include/linux/soc/qcom/apr.h | 70 +- include/uapi/sound/snd_ar_tokens.h | 208 +++ sound/soc/qcom/Kconfig | 22 + sound/soc/qcom/qdsp6/Makefile | 11 +- sound/soc/qcom/qdsp6/audioreach.c | 1135 +++++++++++++++++ sound/soc/qcom/qdsp6/audioreach.h | 726 +++++++++++ sound/soc/qcom/qdsp6/q6afe-clocks.c | 187 +-- sound/soc/qcom/qdsp6/q6afe-dai.c | 687 +--------- sound/soc/qcom/qdsp6/q6apm-dai.c | 415 ++++++ sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 260 ++++ sound/soc/qcom/qdsp6/q6apm.c | 823 ++++++++++++ sound/soc/qcom/qdsp6/q6apm.h | 152 +++ sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c | 186 +++ sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h | 30 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 627 +++++++++ sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 22 + sound/soc/qcom/qdsp6/q6prm-clocks.c | 85 ++ sound/soc/qcom/qdsp6/q6prm.c | 202 +++ sound/soc/qcom/qdsp6/q6prm.h | 78 ++ sound/soc/qcom/qdsp6/topology.c | 1113 ++++++++++++++++ 31 files changed, 7170 insertions(+), 1415 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,apr.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml create mode 100644 include/dt-bindings/soc/qcom,gpr.h create mode 100644 include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h create mode 100644 include/uapi/sound/snd_ar_tokens.h create mode 100644 sound/soc/qcom/qdsp6/audioreach.c create mode 100644 sound/soc/qcom/qdsp6/audioreach.h create mode 100644 sound/soc/qcom/qdsp6/q6apm-dai.c create mode 100644 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c create mode 100644 sound/soc/qcom/qdsp6/q6apm.c create mode 100644 sound/soc/qcom/qdsp6/q6apm.h create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h create mode 100644 sound/soc/qcom/qdsp6/q6prm-clocks.c create mode 100644 sound/soc/qcom/qdsp6/q6prm.c create mode 100644 sound/soc/qcom/qdsp6/q6prm.h create mode 100644 sound/soc/qcom/qdsp6/topology.c