The reset GPIO of WCD9390/WCD9395 is active low and that's how it is routed on typical boards, so correct the example DTS to use expected polarity, instead of IRQ flag (which is a logical mistake on its own).
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml index 6e76f6a8634f..c69291f4d575 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wcd939x.yaml @@ -52,10 +52,10 @@ unevaluatedProperties: false
examples: - | - #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> codec { compatible = "qcom,wcd9390-codec"; - reset-gpios = <&tlmm 32 IRQ_TYPE_NONE>; + reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; #sound-dai-cells = <1>; qcom,tx-device = <&wcd939x_tx>; qcom,rx-device = <&wcd939x_rx>;