Thanks! How about adding a new condition to check whether tdm_slots is 0? If true, we can remove 24 bit format. Is it acceptable?
On Tue, Jun 4, 2019 at 10:48 PM Pierre-Louis Bossart < pierre-louis.bossart@linux.intel.com> wrote:
On 6/4/19 5:49 AM, Yu-Hsuan Hsu wrote:
The supported formats are S16_LE and S24_LE now. However, by datasheet of max98090, S24_LE is only supported when it is in the right justified mode. We should remove 24-bit format if it is not in that mode to avoid triggering error.
Signed-off-by: Yu-Hsuan Hsu yuhsuan@chromium.org
Remove Change-Id.
sound/soc/codecs/max98090.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index 7619ea31ab50..ada8c25e643d 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -1909,6 +1909,21 @@ static int max98090_configure_dmic(struct
max98090_priv *max98090,
return 0;}
+static int max98090_dai_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)+{
struct snd_soc_component *component = dai->component;struct max98090_priv *max98090 =snd_soc_component_get_drvdata(component);
unsigned int fmt = max98090->dai_fmt;/* Remove 24-bit format support if it is not in right justifiedmode. */
if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_RIGHT_J) {substream->runtime->hw.formats = SNDRV_PCM_FMTBIT_S16_LE;snd_pcm_hw_constraint_msbits(substream->runtime, 0, 16,16);
}return 0;+}
The data sheet is ambiguous, it states that 24-bit data is supported in RJ mode when TDM is 0. It doesn't say TDM can only support 16 bits.
That said, it's not clear to me if TDM is supported or not in this driver, there are multiple references to tdm_slots but DSP_A and DSP_B are not supported.
- static int max98090_dai_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
@@ -2316,6 +2331,7 @@ EXPORT_SYMBOL_GPL(max98090_mic_detect); #define MAX98090_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE)
static const struct snd_soc_dai_ops max98090_dai_ops = {
.startup = max98090_dai_startup, .set_sysclk = max98090_dai_set_sysclk, .set_fmt = max98090_dai_set_fmt, .set_tdm_slot = max98090_set_tdm_slot,