On Tue, Apr 01, 2014 at 11:25:02AM +0800, Wang Dongsheng-B40534 wrote:
Subject: [PATCH bisect 2/2] ASoC: fsl_sai: Separately enable interrupts for Tx and Rx streams
We only enable one side interrupt for each stream since over/underrun on the opposite stream would be resulted from what we previously did, enabling TERE but remaining FRDE disabled, even though the xrun on the opposite direction will not break the current stream.
Signed-off-by: Nicolin Chen Guangyu.Chen@freescale.com Acked-by: Xiubo Li Li.Xiubo@freescale.com
sound/soc/fsl/fsl_sai.c | 8 ++++++-- sound/soc/fsl/fsl_sai.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index bdfd497..d64c33f 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -397,4 +397,6 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),
FSL_SAI_CSR_xIE_MASK, FSL_SAI_FLAGS);regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx), FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);@@ -404,4 +406,6 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd, regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx), FSL_SAI_CSR_FRDE, 0);
regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx),FSL_SAI_CSR_xIE_MASK, 0);if (!(tcsr & FSL_SAI_CSR_FRDE || rcsr & FSL_SAI_CSR_FRDE)) {
@@ -464,6 +468,6 @@ static int fsl_sai_dai_probe(struct snd_soc_dai *cpu_dai) struct fsl_sai *sai = dev_get_drvdata(cpu_dai->dev);
- regmap_update_bits(sai->regmap, FSL_SAI_TCSR, 0xffffffff, FSL_SAI_FLAGS);
- regmap_update_bits(sai->regmap, FSL_SAI_RCSR, 0xffffffff, FSL_SAI_FLAGS);
- regmap_update_bits(sai->regmap, FSL_SAI_TCSR, 0xffffffff, 0x0);
- regmap_update_bits(sai->regmap, FSL_SAI_RCSR, 0xffffffff, 0x0);
Why are you remove this macro? Don't use magic number.
It's pretty clear that the so-called magic number is to clear the settings in the registers for driver init as what this driver did at the first place -- no offense but I don't think you would ask this if you check the git-log of the driver.
Thank you, Nicolin Chen