On 02/07/2017 07:11 AM, Takashi Iwai wrote:
Now we support S16 PCM format in addition. For this, we need to set packet_mode=1 in AUD_CONFIG register.
While I think of it, there is a hidden benefit here. If this mode works, then most likely we can push IEC61937 data formatted as S16 PCM directly. For passthrough we needed to left-shit the data, if this mode does what it says it should make some people happy. The U,C,V should not be added in the data stream however (as done by the hdmi: plugin), there is a separate register to program then.
Signed-off-by: Takashi Iwai tiwai@suse.de
sound/x86/intel_hdmi_audio.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c index a0401476cd93..5697552f489a 100644 --- a/sound/x86/intel_hdmi_audio.c +++ b/sound/x86/intel_hdmi_audio.c @@ -136,7 +136,8 @@ static const struct snd_pcm_hardware had_pcm_hardware = { SNDRV_PCM_INFO_MMAP| SNDRV_PCM_INFO_MMAP_VALID | SNDRV_PCM_INFO_BATCH),
- .formats = (SNDRV_PCM_FMTBIT_S24_LE |
- .formats = (SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE |@@ -308,12 +309,10 @@ static int had_prog_status_reg(struct snd_pcm_substream *substream, AUD_CH_STATUS_0, ch_stat0.regval);
switch (substream->runtime->format) { -#if 0 /* FIXME: not supported yet */ case SNDRV_PCM_FORMAT_S16_LE: ch_stat1.regx.max_wrd_len = MAX_SMPL_WIDTH_20; ch_stat1.regx.wrd_len = SMPL_WIDTH_16BITS; break; -#endif case SNDRV_PCM_FORMAT_S24_LE: case SNDRV_PCM_FORMAT_S32_LE: ch_stat1.regx.max_wrd_len = MAX_SMPL_WIDTH_24; @@ -354,6 +353,9 @@ static int had_init_audio_ctrl(struct snd_pcm_substream *substream, else cfg_val.regx.layout = LAYOUT1;
- if (substream->runtime->format == SNDRV_PCM_FORMAT_S16_LE)
cfg_val.regx.packet_mode = 1;- if (substream->runtime->format == SNDRV_PCM_FORMAT_S32_LE) cfg_val.regx.left_align = 1;