From: Conor Dooley conor.dooley@microchip.com
The timers on the k210 have non standard interrupt configurations, which leads to dtbs_check warnings:
k210_generic.dtb: timer@502d0000: interrupts: [[14], [15]] is too long
From schema: Documentation/devicetree/bindings/timer/snps,dw-apb-timer.yaml
Change to using the newly added canaan k210 specific binding to avoid the warning.
Signed-off-by: Conor Dooley conor.dooley@microchip.com --- arch/riscv/boot/dts/canaan/k210.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi index 314f6da5d7f6..ef46ddf3c00c 100644 --- a/arch/riscv/boot/dts/canaan/k210.dtsi +++ b/arch/riscv/boot/dts/canaan/k210.dtsi @@ -310,7 +310,7 @@ fpioa: pinmux@502b0000 { };
timer0: timer@502d0000 { - compatible = "snps,dw-apb-timer"; + compatible = "canaan,k210-apb-timer", "snps,dw-apb-timer"; reg = <0x502D0000 0x100>; interrupts = <14>, <15>; clocks = <&sysclk K210_CLK_TIMER0>, @@ -320,7 +320,7 @@ timer0: timer@502d0000 { };
timer1: timer@502e0000 { - compatible = "snps,dw-apb-timer"; + compatible = "canaan,k210-apb-timer", "snps,dw-apb-timer"; reg = <0x502E0000 0x100>; interrupts = <16>, <17>; clocks = <&sysclk K210_CLK_TIMER1>, @@ -330,7 +330,7 @@ timer1: timer@502e0000 { };
timer2: timer@502f0000 { - compatible = "snps,dw-apb-timer"; + compatible = "canaan,k210-apb-timer", "snps,dw-apb-timer"; reg = <0x502F0000 0x100>; interrupts = <18>, <19>; clocks = <&sysclk K210_CLK_TIMER2>,