Hi Morimoto-san,
On 2017-05-15 01:59:51 +0000, Kuninori Morimoto wrote:
From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
"renesas,rsrc-card" is exchanged to "simple-scu-card". Let's update Document
You state "simple-scu-audio-card" in the patch not "simple-scu-card", is this intentional or a typo?
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
.../devicetree/bindings/sound/renesas,rsnd.txt | 30 +++++++++++----------- 1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 15a7316..3332910 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
** Asynchronous mode
-You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example)
sound {
compatible = "renesas,rsrc-card";
compatible = "simple-scu-audio-card";
- SRC Asynchronous mode setting
@@ -97,12 +97,12 @@ example) * Inputed 48kHz data will be converted to * system specified Hz */
convert-rate = <48000>;
simple-audio-card,convert-rate = <48000>;
cpu {
simple-audio-card,cpu { sound-dai = <&rcar_sound>;
codec {
simple-audio-card,codec { ...@@ -141,23 +141,23 @@ For more detail information, see below ${LINUX}/sound/soc/sh/rcar/ctu.c - comment of header
-You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example)
sound {
compatible = "renesas,rsrc-card";
compatible = "simple-scu-audio-card";*/
- CTU setting
- All input data will be converted to 2ch
- as output data
convert-channels = <2>;
simple-audio-card,convert-channels = <2>;
cpu {
simple-audio-card,cpu { sound-dai = <&rcar_sound>;
codec {
simple-audio-card,codec { ...@@ -190,22 +190,22 @@ and these sounds will be merged by MIX. aplay -D plughw:0,0 xxxx.wav & aplay -D plughw:0,1 yyyy.wav
-You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. Ex) [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] | [MEM] -> [SRC2] -> [CTU03] -+
sound {
compatible = "renesas,rsrc-card";
compatible = "simple-scu-audio-card";
cpu@0 {
simple-audio-card,cpu@0 { sound-dai = <&rcar_sound 0>;
cpu@1 {
simple-audio-card,cpu@1 { sound-dai = <&rcar_sound 1>;
codec {
simple-audio-card,codec { ...-- 1.9.1