On Tue, Jul 20, 2021 at 11:20:25AM -0600, Rob Herring wrote:
There's no reason to have "status" properties in examples. "okay" is the default, and "disabled" turns off some schema checks ('required' specifically).
Enabling qca,ar71xx causes a warning, so let's fix the node names:
Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: phy@3: '#phy-cells' is a required property From schema: schemas/phy/phy-provider.yaml
Cc: Maxime Ripard mripard@kernel.org Cc: Chen-Yu Tsai wens@csie.org Cc: Thierry Reding thierry.reding@gmail.com Cc: Sam Ravnborg sam@ravnborg.org Cc: Rui Miguel Silva rmfrfs@gmail.com Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Mauro Carvalho Chehab mchehab@kernel.org Cc: "David S. Miller" davem@davemloft.net Cc: Jakub Kicinski kuba@kernel.org Cc: Mark Brown broonie@kernel.org Cc: Robert Marko robert.marko@sartura.hr Cc: Philipp Zabel p.zabel@pengutronix.de Cc: Alessandro Zummo a.zummo@towertech.it Cc: Alexandre Belloni alexandre.belloni@bootlin.com Cc: Ramesh Shanmugasundaram rashanmu@gmail.com Cc: "G. Jaya Kumaran" vineetha.g.jaya.kumaran@intel.com Cc: Linus Walleij linus.walleij@linaro.org Cc: Oleksij Rempel o.rempel@pengutronix.de Cc: ChiYuan Huang cy_huang@richtek.com Cc: Wei Xu xuwei5@hisilicon.com Cc: Dilip Kota eswara.kota@linux.intel.com Cc: Karol Gugala kgugala@antmicro.com Cc: Mateusz Holenko mholenko@antmicro.com Cc: Olivier Moysan olivier.moysan@st.com Cc: Peter Ujfalusi peter.ujfalusi@ti.com Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: alsa-devel@alsa-project.org Signed-off-by: Rob Herring robh@kernel.org
Reviewed-by: Oleksij Rempel o.rempel@pengutronix.de
.../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 2 -- .../display/panel/boe,tv101wum-nl6.yaml | 1 - .../bindings/media/nxp,imx7-mipi-csi2.yaml | 2 -- .../bindings/media/renesas,drif.yaml | 1 - .../bindings/net/intel,dwmac-plat.yaml | 2 -- .../bindings/net/intel,ixp4xx-ethernet.yaml | 2 -- .../bindings/net/nfc/samsung,s3fwrn5.yaml | 3 --- .../devicetree/bindings/net/qca,ar71xx.yaml | 25 ++++--------------- .../regulator/richtek,rt6245-regulator.yaml | 1 - .../regulator/vqmmc-ipq4019-regulator.yaml | 1 - .../reset/hisilicon,hi3660-reset.yaml | 1 - .../bindings/reset/intel,rcu-gw.yaml | 1 - .../bindings/rtc/microcrystal,rv3032.yaml | 1 - .../soc/litex/litex,soc-controller.yaml | 1 - .../bindings/sound/st,stm32-sai.yaml | 2 -- .../bindings/sound/ti,j721e-cpb-audio.yaml | 2 -- .../sound/ti,j721e-cpb-ivi-audio.yaml | 2 -- 17 files changed, 5 insertions(+), 45 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index 5d42d36608d9..4951b5ef5c6a 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -174,7 +174,6 @@ examples: phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>;
status = "disabled"; ports { #address-cells = <1>;@@ -233,7 +232,6 @@ examples: phy-names = "phy"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_pins>;
status = "disabled"; ports { #address-cells = <1>;diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml index 38bc1d1b511e..b87a2e28c866 100644 --- a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -70,7 +70,6 @@ examples: avee-supply = <&ppvarp_lcd>; pp1800-supply = <&pp1800_lcd>; backlight = <&backlight_lcd0>;
status = "okay"; port { panel_in: endpoint { remote-endpoint = <&dsi_out>;diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml index 7c09eec78ce5..877183cf4278 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml @@ -200,8 +200,6 @@ examples: clock-names = "pclk", "wrap", "phy", "axi"; power-domains = <&mipi_pd>;
status = "disabled";ports { #address-cells = <1>; #size-cells = <0>;diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml b/Documentation/devicetree/bindings/media/renesas,drif.yaml index 2867d11fe156..9403b235e976 100644 --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml @@ -242,7 +242,6 @@ examples: power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 513>; renesas,bonding = <&drif11>;
status = "disabled"; }; drif11: rif@e6f70000 {diff --git a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml index c1948ce00081..79fa04f5e40d 100644 --- a/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml +++ b/Documentation/devicetree/bindings/net/intel,dwmac-plat.yaml @@ -116,8 +116,6 @@ examples: snps,mtl-rx-config = <&mtl_rx_setup>; snps,mtl-tx-config = <&mtl_tx_setup>; snps,tso;
status = "okay";mdio0 { #address-cells = <1>; #size-cells = <0>;diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml index f2e91d1bf7d7..378ed2d3b003 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -71,7 +71,6 @@ examples: ethernet@c8009000 { compatible = "intel,ixp4xx-ethernet"; reg = <0xc8009000 0x1000>;
status = "disabled"; queue-rx = <&qmgr 4>; queue-txready = <&qmgr 21>; intel,npe-handle = <&npe 1>;@@ -82,7 +81,6 @@ examples: ethernet@c800c000 { compatible = "intel,ixp4xx-ethernet"; reg = <0xc800c000 0x1000>;
status = "disabled"; queue-rx = <&qmgr 3>; queue-txready = <&qmgr 20>; intel,npe-handle = <&npe 2>;diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml index 081742c2b726..64995cbb0f97 100644 --- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml +++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml @@ -90,14 +90,11 @@ examples: # UART example on Raspberry Pi
| uart0 {
status = "okay";nfc { compatible = "samsung,s3fwrn82"; en-gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; wake-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;status = "okay"; };};
diff --git a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml index f0db22645d73..cf4d35edaa1b 100644 --- a/Documentation/devicetree/bindings/net/qca,ar71xx.yaml +++ b/Documentation/devicetree/bindings/net/qca,ar71xx.yaml @@ -101,8 +101,6 @@ examples:
phy-mode = "gmii";
status = "disabled";fixed-link { speed = <1000>; full-duplex;@@ -148,32 +146,24 @@ examples: reg = <0x1>; phy-handle = <&phy_port0>; phy-mode = "internal";
status = "disabled"; }; switch_port2: port@2 { reg = <0x2>; phy-handle = <&phy_port1>; phy-mode = "internal";status = "disabled"; }; switch_port3: port@3 { reg = <0x3>; phy-handle = <&phy_port2>; phy-mode = "internal";status = "disabled"; }; switch_port4: port@4 { reg = <0x4>; phy-handle = <&phy_port3>; phy-mode = "internal";status = "disabled"; }; };@@ -183,34 +173,29 @@ examples:
interrupt-parent = <&switch10>;
phy_port0: phy@0 {
phy_port0: ethernet-phy@0 { reg = <0x0>; interrupts = <0>;
status = "disabled"; };phy_port1: phy@1 {
phy_port1: ethernet-phy@1 { reg = <0x1>; interrupts = <0>;
status = "disabled"; };phy_port2: phy@2 {
phy_port2: ethernet-phy@2 { reg = <0x2>; interrupts = <0>;
status = "disabled"; };phy_port3: phy@3 {
phy_port3: ethernet-phy@3 { reg = <0x3>; interrupts = <0>;
status = "disabled"; };phy_port4: phy@4 {
phy_port4: ethernet-phy@4 { reg = <0x4>; interrupts = <0>;
status = "disabled"; }; }; };diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml index 796ceac87445..e983d0e70c9b 100644 --- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml @@ -77,7 +77,6 @@ examples:
rt6245@34 { compatible = "richtek,rt6245";
status = "okay"; reg = <0x34>; enable-gpios = <&gpio26 2 0>;diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml index 6f45582c914e..dd7a2f92634c 100644 --- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml @@ -39,6 +39,5 @@ examples: regulator-min-microvolt = <1500000>; regulator-max-microvolt = <3000000>; regulator-always-on;
status = "disabled";... diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml index 9bf40952e5b7..b0c41ab1a746 100644 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.yaml @@ -72,6 +72,5 @@ examples: resets = <&iomcu_rst 0x20 3>; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
status = "disabled";... diff --git a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml index 6b2d56cc3f38..13bf6bb3f097 100644 --- a/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml +++ b/Documentation/devicetree/bindings/reset/intel,rcu-gw.yaml @@ -57,7 +57,6 @@ examples: };
pwm: pwm@e0d00000 {
status = "disabled"; compatible = "intel,lgm-pwm"; reg = <0xe0d00000 0x30>; clocks = <&cgu0 1>;diff --git a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml index a2c55303810d..9593840a4a2b 100644 --- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml +++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml @@ -53,7 +53,6 @@ examples: rtc@51 { compatible = "microcrystal,rv3032"; reg = <0x51>;
status = "okay"; pinctrl-0 = <&rtc_nint_pins>; interrupts-extended = <&gpio1 16 IRQ_TYPE_LEVEL_HIGH>; trickle-resistor-ohms = <7000>;diff --git a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml index c8b57c7fd08c..ecae9fa8561b 100644 --- a/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml +++ b/Documentation/devicetree/bindings/soc/litex/litex,soc-controller.yaml @@ -35,7 +35,6 @@ examples: soc_ctrl0: soc-controller@f0000000 { compatible = "litex,soc-controller"; reg = <0xf0000000 0xc>;
status = "okay";... diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml index 06e83461705c..f97132400bb6 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml @@ -180,7 +180,6 @@ examples: pinctrl-names = "default", "sleep"; pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
status = "okay"; sai2a: audio-controller@4400b004 { #sound-dai-cells = <0>;@@ -190,7 +189,6 @@ examples: dma-names = "tx"; clocks = <&rcc SAI2_K>; clock-names = "sai_ck";
status = "okay"; };diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml index ec06789b21df..6806f53a4aed 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml @@ -127,8 +127,6 @@ examples: compatible = "ti,j721e-cpb-audio"; model = "j721e-cpb";
status = "okay";ti,cpb-mcasp = <&mcasp10>; ti,cpb-codec = <&pcm3168a_1>;diff --git a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml index ee9f960de36b..859d369c71e2 100644 --- a/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml +++ b/Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml @@ -119,8 +119,6 @@ examples: compatible = "ti,j721e-cpb-ivi-audio"; model = "j721e-cpb-ivi";
status = "okay";ti,cpb-mcasp = <&mcasp10>; ti,cpb-codec = <&pcm3168a_1>;-- 2.27.0