From: Weidong Wang wangweidong.a@awinic.com
Add two properties, the "awinic,audio-channel" property and the "awinic,sync-flag". The "awinic,audio-channel" is used to make different PA load different configurations, the "awinic,sync-flag" is used to synchronize the phases of multiple PA. These two properties will be read by the corresponding driver, allowing multi-PA to achieve better playback effect.
Signed-off-by: Weidong Wang wangweidong.a@awinic.com --- .../bindings/sound/awinic,aw88395.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml index 4051c2538caf..b977d3de87cb 100644 --- a/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml +++ b/Documentation/devicetree/bindings/sound/awinic,aw88395.yaml @@ -32,11 +32,25 @@ properties: reset-gpios: maxItems: 1
+ awinic,audio-channel: + description: + It is used to distinguish multiple PA devices, so that different + configurations can be loaded to different PA devices + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + + awinic,sync-flag: + description: + Flag bit used to keep the phase synchronized in the case of multiple PA + $ref: /schemas/types.yaml#/definitions/flag + required: - compatible - reg - '#sound-dai-cells' - reset-gpios + - awinic,audio-channel
unevaluatedProperties: false
@@ -51,5 +65,7 @@ examples: reg = <0x34>; #sound-dai-cells = <0>; reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + awinic,audio-channel = <0>; + awinic,sync-flag; }; };