The nau8812 device [1] uses exactly the same register layout as the nau8810 so there is no need to differentiate those. The only difference is the output power and an additional aux-port input on the nau8812. The registers related to the aux-port don't affect the nau8810 in a negative way. They are just ignored (set to '0').
[1] http://www.nuvoton.com/resource-files/NAU8812DatasheetRev2.7.pdf
Signed-off-by: Marco Felsch m.felsch@pengutronix.de --- sound/soc/codecs/Kconfig | 2 +- sound/soc/codecs/nau8810.c | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 229cc89f8c5a..d13a2e5d0afb 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1470,7 +1470,7 @@ config SND_SOC_NAU8540 depends on I2C
config SND_SOC_NAU8810 - tristate "Nuvoton Technology Corporation NAU88C10 CODEC" + tristate "Nuvoton Technology Corporation NAU88C10/12 CODEC" depends on I2C
config SND_SOC_NAU8822 diff --git a/sound/soc/codecs/nau8810.c b/sound/soc/codecs/nau8810.c index de26758c30a8..a32a4a8d5f50 100644 --- a/sound/soc/codecs/nau8810.c +++ b/sound/soc/codecs/nau8810.c @@ -862,6 +862,7 @@ static int nau8810_i2c_probe(struct i2c_client *i2c,
static const struct i2c_device_id nau8810_i2c_id[] = { { "nau8810", 0 }, + { "nau8812", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id); @@ -869,6 +870,7 @@ MODULE_DEVICE_TABLE(i2c, nau8810_i2c_id); #ifdef CONFIG_OF static const struct of_device_id nau8810_of_match[] = { { .compatible = "nuvoton,nau8810", }, + { .compatible = "nuvoton,nau8812", }, { } }; MODULE_DEVICE_TABLE(of, nau8810_of_match);