Update the output control for NAU8825C.
Signed-off-by: David Lin CTLIN0@nuvoton.com --- sound/soc/codecs/nau8825.c | 47 ++++++++++++++++++++++++++++++-------- 1 file changed, 37 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index e62f3d615b40..9e0e4ddf128e 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -628,8 +628,13 @@ static void nau8825_xtalk_prepare(struct nau8825 *nau8825) regmap_update_bits(nau8825->regmap, NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0); /* Power up left and right DAC */ - regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, - NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); + if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825) + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); + else + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); }
static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825) @@ -642,9 +647,14 @@ static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825) NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); /* Power down left and right DAC */ - regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, - NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, - NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); + if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825) + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); + else + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); + /* Enable the TESTDAC and disable L/R HP impedance */ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP | @@ -1017,10 +1027,25 @@ static int nau8825_output_dac_event(struct snd_soc_dapm_widget *w, /* Disables the TESTDAC to let DAC signal pass through. */ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, NAU8825_BIAS_TESTDAC_EN, 0); + if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825) + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); + else + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); break; case SND_SOC_DAPM_POST_PMD: regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN); + if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825) + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); + else + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); + break; default: return -EINVAL; @@ -1228,12 +1253,13 @@ static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = { NAU8825_REG_POWER_UP_CONTROL, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("Output DACL", 7, - NAU8825_REG_CHARGE_PUMP, 8, 1, nau8825_output_dac_event, + SND_SOC_NOPM, 0, 0, nau8825_output_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_PGA_S("Output DACR", 7, - NAU8825_REG_CHARGE_PUMP, 9, 1, nau8825_output_dac_event, + SND_SOC_NOPM, 0, 0, nau8825_output_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
+ /* HPOL/R are ungrounded by disabling 16 Ohm pull-downs on playback */ SND_SOC_DAPM_PGA_S("HPOL Pulldown", 8, NAU8825_REG_HSD_CTRL, 0, 1, NULL, 0), @@ -2227,9 +2253,10 @@ static void nau8825_init_regs(struct nau8825 *nau8825) regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1, NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64); /* Disable DACR/L power */ - regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP, - NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, - NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); + if (nau8825->sw_id == NAU8825_SOFTWARE_ID_NAU8825) + regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); /* Enable TESTDAC. This sets the analog DAC inputs to a '0' input * signal to avoid any glitches due to power up transients in both * the analog and digital DAC circuit.