Added for supporting larger embedded controller flash.
Acked-by: Enric Balletbo i Serra enric.balletbo@collabora.com Signed-off-by: Gwendal Grignou gwendal@chromium.org --- include/linux/mfd/cros_ec_commands.h | 150 ++++++++++++++++++++++++++- 1 file changed, 147 insertions(+), 3 deletions(-)
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h index 2e5c93d858d8..393c5abab7a0 100644 --- a/include/linux/mfd/cros_ec_commands.h +++ b/include/linux/mfd/cros_ec_commands.h @@ -1108,6 +1108,7 @@ struct ec_response_get_features {
/* Get flash info */ #define EC_CMD_FLASH_INFO 0x0010 +#define EC_VER_FLASH_INFO 2
/** * struct ec_response_flash_info - Response to the flash info command. @@ -1134,6 +1135,15 @@ struct ec_response_flash_info { */ #define EC_FLASH_INFO_ERASE_TO_0 BIT(0)
+/* + * Flash must be selected for read/write/erase operations to succeed. This may + * be necessary on a chip where write/erase can be corrupted by other board + * activity, or where the chip needs to enable some sort of programming voltage, + * or where the read/write/erase operations require cleanly suspending other + * chip functionality. + */ +#define EC_FLASH_INFO_SELECT_REQUIRED BIT(1) + /** * struct ec_response_flash_info_1 - Response to the flash info v1 command. * @flash_size: Usable flash size in bytes. @@ -1156,6 +1166,12 @@ struct ec_response_flash_info { * gcc anonymous structs don't seem to get along with the __packed directive; * if they did we'd define the version 0 structure as a sub-structure of this * one. + * + * Version 2 supports flash banks of different sizes: + * The caller specified the number of banks it has preallocated + * (num_banks_desc) + * The EC returns the number of banks describing the flash memory. + * It adds banks descriptions up to num_banks_desc. */ struct ec_response_flash_info_1 { /* Version 0 fields; see above for description */ @@ -1169,6 +1185,42 @@ struct ec_response_flash_info_1 { uint32_t flags; } __ec_align4;
+struct ec_params_flash_info_2 { + /* Number of banks to describe */ + uint16_t num_banks_desc; + /* Reserved; set 0; ignore on read */ + uint8_t reserved[2]; +} __ec_align4; + +struct ec_flash_bank { + /* Number of sector is in this bank. */ + uint16_t count; + /* Size in power of 2 of each sector (8 --> 256 bytes) */ + uint8_t size_exp; + /* Minimal write size for the sectors in this bank */ + uint8_t write_size_exp; + /* Erase size for the sectors in this bank */ + uint8_t erase_size_exp; + /* Size for write protection, usually identical to erase size. */ + uint8_t protect_size_exp; + /* Reserved; set 0; ignore on read */ + uint8_t reserved[2]; +}; + +struct ec_response_flash_info_2 { + /* Total flash in the EC. */ + uint32_t flash_size; + /* Flags; see EC_FLASH_INFO_* */ + uint32_t flags; + /* Maximum size to use to send data to write to the EC. */ + uint32_t write_ideal_size; + /* Number of banks present in the EC. */ + uint16_t num_banks_total; + /* Number of banks described in banks array. */ + uint16_t num_banks_desc; + struct ec_flash_bank banks[0]; +} __ec_align4; + /* * Read flash * @@ -1208,7 +1260,7 @@ struct ec_params_flash_write { #define EC_CMD_FLASH_ERASE 0x0013
/** - * struct ec_params_flash_erase - Parameters for the flash erase command. + * struct ec_params_flash_erase - Parameters for the flash erase command, v0. * @offset: Byte offset to erase. * @size: Size to erase in bytes. */ @@ -1217,6 +1269,43 @@ struct ec_params_flash_erase { uint32_t size; } __ec_align4;
+/* + * v1 add async erase: + * subcommands can returns: + * EC_RES_SUCCESS : erased (see ERASE_SECTOR_ASYNC case below). + * EC_RES_INVALID_PARAM : offset/size are not aligned on a erase boundary. + * EC_RES_ERROR : other errors. + * EC_RES_BUSY : an existing erase operation is in progress. + * EC_RES_ACCESS_DENIED: Trying to erase running image. + * + * When ERASE_SECTOR_ASYNC returns EC_RES_SUCCESS, the operation is just + * properly queued. The user must call ERASE_GET_RESULT subcommand to get + * the proper result. + * When ERASE_GET_RESULT returns EC_RES_BUSY, the caller must wait and send + * ERASE_GET_RESULT again to get the result of ERASE_SECTOR_ASYNC. + * ERASE_GET_RESULT command may timeout on EC where flash access is not + * permitted while erasing. (For instance, STM32F4). + */ +enum ec_flash_erase_cmd { + FLASH_ERASE_SECTOR, /* Erase and wait for result */ + FLASH_ERASE_SECTOR_ASYNC, /* Erase and return immediately. */ + FLASH_ERASE_GET_RESULT, /* Ask for last erase result */ +}; + +/** + * struct ec_params_flash_erase_v1 - Parameters for the flash erase command, v1. + * @cmd: One of ec_flash_erase_cmd. + * @reserved: Pad byte; currently always contains 0. + * @flag: No flags defined yet; set to 0. + * @params: Same as v0 parameters. + */ +struct ec_params_flash_erase_v1 { + uint8_t cmd; + uint8_t reserved; + uint16_t flag; + struct ec_params_flash_erase params; +} __ec_align4; + /* * Get/set flash protection. * @@ -1252,6 +1341,15 @@ struct ec_params_flash_erase { #define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5) /* Entire flash code protected when the EC boots */ #define EC_FLASH_PROTECT_ALL_AT_BOOT BIT(6) +/* RW flash code protected when the EC boots */ +#define EC_FLASH_PROTECT_RW_AT_BOOT BIT(7) +/* RW flash code protected now. */ +#define EC_FLASH_PROTECT_RW_NOW BIT(8) +/* Rollback information flash region protected when the EC boots */ +#define EC_FLASH_PROTECT_ROLLBACK_AT_BOOT BIT(9) +/* Rollback information flash region protected now */ +#define EC_FLASH_PROTECT_ROLLBACK_NOW BIT(10) +
/** * struct ec_params_flash_protect - Parameters for the flash protect command. @@ -1290,16 +1388,31 @@ struct ec_response_flash_protect { enum ec_flash_region { /* Region which holds read-only EC image */ EC_FLASH_REGION_RO = 0, - /* Region which holds rewritable EC image */ - EC_FLASH_REGION_RW, + /* + * Region which holds active RW image. 'Active' is different from + * 'running'. Active means 'scheduled-to-run'. Since RO image always + * scheduled to run, active/non-active applies only to RW images (for + * the same reason 'update' applies only to RW images. It's a state of + * an image on a flash. Running image can be RO, RW_A, RW_B but active + * image can only be RW_A or RW_B. In recovery mode, an active RW image + * doesn't enter 'running' state but it's still active on a flash. + */ + EC_FLASH_REGION_ACTIVE, /* * Region which should be write-protected in the factory (a superset of * EC_FLASH_REGION_RO) */ EC_FLASH_REGION_WP_RO, + /* Region which holds updatable (non-active) RW image */ + EC_FLASH_REGION_UPDATE, /* Number of regions */ EC_FLASH_REGION_COUNT, }; +/* + * 'RW' is vague if there are multiple RW images; we mean the active one, + * so the old constant is deprecated. + */ +#define EC_FLASH_REGION_RW EC_FLASH_REGION_ACTIVE
/** * struct ec_params_flash_region_info - Parameters for the flash region info @@ -1334,6 +1447,37 @@ struct ec_response_vbnvcontext { uint8_t block[EC_VBNV_BLOCK_SIZE]; } __ec_align4;
+ +/* Get SPI flash information */ +#define EC_CMD_FLASH_SPI_INFO 0x0018 + +struct ec_response_flash_spi_info { + /* JEDEC info from command 0x9F (manufacturer, memory type, size) */ + uint8_t jedec[3]; + + /* Pad byte; currently always contains 0 */ + uint8_t reserved0; + + /* Manufacturer / device ID from command 0x90 */ + uint8_t mfr_dev_id[2]; + + /* Status registers from command 0x05 and 0x35 */ + uint8_t sr1, sr2; +} __ec_align1; + + +/* Select flash during flash operations */ +#define EC_CMD_FLASH_SELECT 0x0019 + +/** + * struct ec_params_flash_select - Parameters for the flash select command. + * @select: 1 to select flash, 0 to deselect flash + */ +struct ec_params_flash_select { + uint8_t select; +} __ec_align4; + + /*****************************************************************************/ /* PWM commands */