Jarkko,
On 12/23/2016 08:27 PM, Jarkko Nikula wrote:
Hi
On 12/23/2016 11:21 AM, Peter Ujfalusi wrote:
The RESET register only have one self clearing bit and it should not be cached. If it is cached, when we sync the registers back to the chip we will initiate a software reset as well, which is not desirable.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com
sound/soc/codecs/tlv320aic3x.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index 216f74084c6a..7b6924e19021 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -126,6 +126,16 @@ static const struct reg_default aic3x_reg[] = { { 108, 0x00 }, { 109, 0x00 }, };
+static bool aic3x_volatile_reg(struct device *dev, unsigned int reg) +{
- switch (reg) {
- case AIC3X_RESET:
return true;- default:
return false;- }
+}
You mentioned offline you tracked this into my commit 9fb352b18b11 ("ASoC: tlv320aic3x: Do soft reset to codec when going to bias off state") but was it by bisecting or by debugging? I think I tried to cover it in a commit before 508b76864c18 ("ASoC: tlv320aic3x: Don't sync first two registers from register cache").
If you found it by debugging can it be that pop noise came because of 2a6fedec195b ("ASoC: tlv320aic3x: Convert to direct regmap API usage")?
Noticed this when debugging. The conversion to regmap did introduced this.
Just thinking if there's a need to have this into stable.
Right, it might be a good idea.
Reviewed-by: Jarkko Nikula jarkko.nikula@bitmer.com