On Wed, Jan 19, 2011 at 01:50:02PM -0700, Stephen Warren wrote:
This looks good, one query and one minor omission though.
/* Used to enable configuration of a GPIO to all zeros */ -#define WM8903_GPIO_NO_CONFIG 0x8000 +#define WM8903_GPIO_NO_CONFIG 0x10000
Why this change? The top bit in the registers is never actually used, really they're all 15 bit.
+static int wm8903_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{
- struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
- struct snd_soc_codec *codec = wm8903->codec;
- return snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset,
WM8903_GP1_DIR_MASK, WM8903_GP1_DIR);+}
+static int wm8903_gpio_direction_out(struct gpio_chip *chip,
unsigned offset, int value)+{
- struct wm8903_priv *wm8903 = gpio_to_wm8903(chip);
- struct snd_soc_codec *codec = wm8903->codec;
- return snd_soc_update_bits(codec, WM8903_GPIO_CONTROL_1 + offset,
WM8903_GP1_DIR_MASK | WM8903_GP1_LVL_MASK,value << WM8903_GP2_LVL_SHIFT);+}
These should also set GPn_FN - to zero for GPIO output, 3 for GPIO input. Otherwise changing between input and output mode at runtime won't do the right thing. As a side effect of that you probably wouldn't need to specify the GPIO configuration in platform data.