Edit core functions to support the Sound Blaster Z and Recon3Di for startup and loading of the DSP, as well as setting effects.
Signed-off-by: Connor McAdams conmanx360@gmail.com --- sound/pci/hda/patch_ca0132.c | 1064 ++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 1018 insertions(+), 46 deletions(-)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index 5cda7a5..bb0feaa 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -45,6 +45,7 @@ #define FLOAT_ZERO 0x00000000 #define FLOAT_ONE 0x3f800000 #define FLOAT_TWO 0x40000000 +#define FLOAT_THREE 0x40400000 #define FLOAT_MINUS_5 0xc0a00000
#define UNSOL_TAG_DSP 0x16 @@ -710,6 +711,7 @@ struct ca0132_spec { const struct hda_verb *base_init_verbs; const struct hda_verb *base_exit_verbs; const struct hda_verb *chip_init_verbs; + const struct hda_verb *sbz_init_verbs; struct hda_verb *spec_init_verbs; struct auto_pin_cfg autocfg;
@@ -743,6 +745,8 @@ struct ca0132_spec { unsigned int scp_resp_data[4]; unsigned int scp_resp_count; bool alt_firmware_present; + bool startup_check_entered; + bool dsp_reload;
/* mixer and effects related */ unsigned char dmic_ctl; @@ -768,6 +772,13 @@ struct ca0132_spec { * switching, and other unknown commands. */ void __iomem *mem_base; + + /* + * Whether or not to use the alt functions like alt_select_out, + * alt_select_in, etc. Only used on desktop codecs for now, because of + * surround sound support. + */ + bool use_alt_functions; };
/* @@ -1015,6 +1026,29 @@ static int chipio_write(struct hda_codec *codec, }
/* + * Write given value to the given address through the chip I/O widget. + * not protected by the Mutex + */ +static int chipio_write_no_mutex(struct hda_codec *codec, + unsigned int chip_addx, const unsigned int data) +{ + int err; + + + /* write the address, and if successful proceed to write data */ + err = chipio_write_address(codec, chip_addx); + if (err < 0) + goto exit; + + err = chipio_write_data(codec, data); + if (err < 0) + goto exit; + +exit: + return err; +} + +/* * Write multiple values to the given address through the chip I/O widget. * protected by the Mutex */ @@ -1108,6 +1142,81 @@ static void chipio_set_control_param(struct hda_codec *codec, }
/* + * Set chip parameters through the chip I/O widget. NO MUTEX. + */ +static void chipio_set_control_param_no_mutex(struct hda_codec *codec, + enum control_param_id param_id, int param_val) +{ + int val; + + if ((param_id < 32) && (param_val < 8)) { + val = (param_val << 5) | (param_id); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PARAM_SET, val); + } else { + if (chipio_send(codec, VENDOR_CHIPIO_STATUS, 0) == 0) { + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PARAM_EX_ID_SET, + param_id); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PARAM_EX_VALUE_SET, + param_val); + } + } +} +/* + * Connect stream to a source point, and then connect + * that source point to a destination point. + */ +static void chipio_set_stream_source_dest(struct hda_codec *codec, + int streamid, int source_point, int dest_point) +{ + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_ID, streamid); + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_SOURCE_CONN_POINT, source_point); + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_DEST_CONN_POINT, dest_point); +} + +/* + * Set number of channels in the selected stream. + */ +static void chipio_set_stream_channels(struct hda_codec *codec, + int streamid, unsigned int channels) +{ + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_ID, streamid); + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAMS_CHANNELS, channels); +} + +/* + * Enable/Disable audio stream. + */ +static void chipio_set_stream_control(struct hda_codec *codec, + int streamid, int enable) +{ + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_ID, streamid); + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_STREAM_CONTROL, enable); +} + + +/* + * Set sampling rate of the connection point. NO MUTEX. + */ +static void chipio_set_conn_rate_no_mutex(struct hda_codec *codec, + int connid, enum ca0132_sample_rate rate) +{ + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_CONN_POINT_ID, connid); + chipio_set_control_param_no_mutex(codec, + CONTROL_PARAM_CONN_POINT_SAMPLE_RATE, rate); +} + +/* * Set sampling rate of the connection point. */ static void chipio_set_conn_rate(struct hda_codec *codec, @@ -1470,8 +1579,8 @@ static int dspio_send_scp_message(struct hda_codec *codec, * Returns zero or a negative error code. */ static int dspio_scp(struct hda_codec *codec, - int mod_id, int req, int dir, void *data, unsigned int len, - void *reply, unsigned int *reply_len) + int mod_id, int src_id, int req, int dir, const void *data, + unsigned int len, void *reply, unsigned int *reply_len) { int status = 0; struct scp_msg scp_send, scp_reply; @@ -1495,7 +1604,7 @@ static int dspio_scp(struct hda_codec *codec, return -EINVAL; }
- scp_send.hdr = make_scp_header(mod_id, 0x20, (dir == SCP_GET), req, + scp_send.hdr = make_scp_header(mod_id, src_id, (dir == SCP_GET), req, 0, 0, 0, len/sizeof(unsigned int)); if (data != NULL && len > 0) { len = min((unsigned int)(sizeof(scp_send.data)), len); @@ -1552,15 +1661,24 @@ static int dspio_scp(struct hda_codec *codec, * Set DSP parameters */ static int dspio_set_param(struct hda_codec *codec, int mod_id, - int req, void *data, unsigned int len) + int src_id, int req, const void *data, unsigned int len) { - return dspio_scp(codec, mod_id, req, SCP_SET, data, len, NULL, NULL); + return dspio_scp(codec, mod_id, src_id, req, SCP_SET, data, len, NULL, + NULL); }
static int dspio_set_uint_param(struct hda_codec *codec, int mod_id, - int req, unsigned int data) + int req, const unsigned int data) { - return dspio_set_param(codec, mod_id, req, &data, sizeof(unsigned int)); + return dspio_set_param(codec, mod_id, 0x20, req, &data, + sizeof(unsigned int)); +} + +static int dspio_set_uint_param_no_source(struct hda_codec *codec, int mod_id, + int req, const unsigned int data) +{ + return dspio_set_param(codec, mod_id, 0x00, req, &data, + sizeof(unsigned int)); }
/* @@ -1572,8 +1690,9 @@ static int dspio_alloc_dma_chan(struct hda_codec *codec, unsigned int *dma_chan) unsigned int size = sizeof(dma_chan);
codec_dbg(codec, " dspio_alloc_dma_chan() -- begin\n"); - status = dspio_scp(codec, MASTERCONTROL, MASTERCONTROL_ALLOC_DMA_CHAN, - SCP_GET, NULL, 0, dma_chan, &size); + status = dspio_scp(codec, MASTERCONTROL, 0x20, + MASTERCONTROL_ALLOC_DMA_CHAN, SCP_GET, NULL, 0, + dma_chan, &size);
if (status < 0) { codec_dbg(codec, "dspio_alloc_dma_chan: SCP Failed\n"); @@ -1602,8 +1721,9 @@ static int dspio_free_dma_chan(struct hda_codec *codec, unsigned int dma_chan) codec_dbg(codec, " dspio_free_dma_chan() -- begin\n"); codec_dbg(codec, "dspio_free_dma_chan: chan=%d\n", dma_chan);
- status = dspio_scp(codec, MASTERCONTROL, MASTERCONTROL_ALLOC_DMA_CHAN, - SCP_SET, &dma_chan, sizeof(dma_chan), NULL, &dummy); + status = dspio_scp(codec, MASTERCONTROL, 0x20, + MASTERCONTROL_ALLOC_DMA_CHAN, SCP_SET, &dma_chan, + sizeof(dma_chan), NULL, &dummy);
if (status < 0) { codec_dbg(codec, "dspio_free_dma_chan: SCP Failed\n"); @@ -2625,14 +2745,16 @@ static int dspxfr_image(struct hda_codec *codec, */ static void dspload_post_setup(struct hda_codec *codec) { + struct ca0132_spec *spec = codec->spec; codec_dbg(codec, "---- dspload_post_setup ------\n"); + if (!spec->use_alt_functions) { + /*set DSP speaker to 2.0 configuration*/ + chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x18), 0x08080080); + chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x19), 0x3f800000);
- /*set DSP speaker to 2.0 configuration*/ - chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x18), 0x08080080); - chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x19), 0x3f800000); - - /*update write pointer*/ - chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x29), 0x00000002); + /*update write pointer*/ + chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x29), 0x00000002); + } }
/** @@ -2740,6 +2862,170 @@ static bool dspload_wait_loaded(struct hda_codec *codec) }
/* + * Setup GPIO for the other variants of Core3D. + */ + +/* + * Sets up the GPIO pins so that they are discoverable. If this isn't done, + * the card shows as having no GPIO pins. + */ +static void ca0132_gpio_init(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + switch (spec->quirk) { + case QUIRK_SBZ: + snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); + snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53); + snd_hda_codec_write(codec, 0x01, 0, 0x790, 0x23); + break; + case QUIRK_R3DI: + snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); + snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x5B); + break; + } + +} + +/* Sets the GPIO for audio output. */ +static void ca0132_gpio_setup(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + switch (spec->quirk) { + case QUIRK_SBZ: + snd_hda_codec_write(codec, 0x01, 0, + AC_VERB_SET_GPIO_DIRECTION, 0x07); + snd_hda_codec_write(codec, 0x01, 0, + AC_VERB_SET_GPIO_MASK, 0x07); + snd_hda_codec_write(codec, 0x01, 0, + AC_VERB_SET_GPIO_DATA, 0x04); + snd_hda_codec_write(codec, 0x01, 0, + AC_VERB_SET_GPIO_DATA, 0x06); + break; + case QUIRK_R3DI: + snd_hda_codec_write(codec, 0x01, 0, + AC_VERB_SET_GPIO_DIRECTION, 0x1E); + snd_hda_codec_write(codec, 0x01, 0, + AC_VERB_SET_GPIO_MASK, 0x1F); + snd_hda_codec_write(codec, 0x01, 0, + AC_VERB_SET_GPIO_DATA, 0x0C); + break; + } +} + +/* + * GPIO control functions for the Recon3D integrated. + */ + +enum r3di_gpio_bit { + /* Bit 1 - Switch between front/rear mic. 0 = rear, 1 = front */ + R3DI_MIC_SELECT_BIT = 1, + /* Bit 2 - Switch between headphone/line out. 0 = Headphone, 1 = Line */ + R3DI_OUT_SELECT_BIT = 2, + /* + * I dunno what this actually does, but it stays on until the dsp + * is downloaded. + */ + R3DI_GPIO_DSP_DOWNLOADING = 3, + /* + * Same as above, no clue what it does, but it comes on after the dsp + * is downloaded. + */ + R3DI_GPIO_DSP_DOWNLOADED = 4 +}; + +enum r3di_mic_select { + /* Set GPIO bit 1 to 0 for rear mic */ + R3DI_REAR_MIC = 0, + /* Set GPIO bit 1 to 1 for front microphone*/ + R3DI_FRONT_MIC = 1 +}; + +enum r3di_out_select { + /* Set GPIO bit 2 to 0 for headphone */ + R3DI_HEADPHONE_OUT = 0, + /* Set GPIO bit 2 to 1 for speaker */ + R3DI_LINE_OUT = 1 +}; +enum r3di_dsp_status { + /* Set GPIO bit 3 to 1 until DSP is downloaded */ + R3DI_DSP_DOWNLOADING = 0, + /* Set GPIO bit 4 to 1 once DSP is downloaded */ + R3DI_DSP_DOWNLOADED = 1 +}; +/* Not used until next patch in series */ +/* +static void r3di_gpio_mic_set(struct hda_codec *codec, + enum r3di_mic_select cur_mic) +{ + unsigned int cur_gpio; + +*/ /* Get the current GPIO Data setup */ +/* cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); + + switch (cur_mic) { + case R3DI_REAR_MIC: + cur_gpio &= ~(1 << R3DI_MIC_SELECT_BIT); + break; + case R3DI_FRONT_MIC: + cur_gpio |= (1 << R3DI_MIC_SELECT_BIT); + break; + } + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_GPIO_DATA, cur_gpio); +} + +static void r3di_gpio_out_set(struct hda_codec *codec, + enum r3di_out_select cur_out) +{ + unsigned int cur_gpio; + +*/ /* Get the current GPIO Data setup */ +/* cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); + + switch (cur_out) { + case R3DI_HEADPHONE_OUT: + cur_gpio &= ~(1 << R3DI_OUT_SELECT_BIT); + break; + case R3DI_LINE_OUT: + cur_gpio |= (1 << R3DI_OUT_SELECT_BIT); + break; + } + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_GPIO_DATA, cur_gpio); +} +*/ +static void r3di_gpio_dsp_status_set(struct hda_codec *codec, + enum r3di_dsp_status dsp_status) +{ + unsigned int cur_gpio; + + /* Get the current GPIO Data setup */ + cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); + + switch (dsp_status) { + case R3DI_DSP_DOWNLOADING: + cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADING); + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_GPIO_DATA, cur_gpio); + break; + case R3DI_DSP_DOWNLOADED: + /* Set DOWNLOADING bit to 0. */ + cur_gpio &= ~(1 << R3DI_GPIO_DSP_DOWNLOADING); + + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_GPIO_DATA, cur_gpio); + + cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADED); + break; + } + + snd_hda_codec_write(codec, codec->core.afg, 0, + AC_VERB_SET_GPIO_DATA, cur_gpio); +} + +/* * PCM callbacks */ static int ca0132_playback_pcm_prepare(struct hda_pcm_stream *hinfo, @@ -2992,7 +3278,7 @@ static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, break;
snd_hda_power_up(codec); - dspio_set_param(codec, ca0132_tuning_ctls[i].mid, + dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ca0132_tuning_ctls[i].req, &(lookup[idx]), sizeof(unsigned int)); snd_hda_power_down(codec); @@ -3318,6 +3604,9 @@ static void ca0132_unsol_hp_delayed(struct work_struct *work) static void ca0132_set_dmic(struct hda_codec *codec, int enable); static int ca0132_mic_boost_set(struct hda_codec *codec, long val); static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val); +static void resume_mic1(struct hda_codec *codec, unsigned int oldval); +static int stop_mic1(struct hda_codec *codec); +static int ca0132_cvoice_switch_set(struct hda_codec *codec);
/* * Select the active VIP source @@ -3468,7 +3757,7 @@ static int ca0132_voicefx_set(struct hda_codec *codec, int enable) static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val) { struct ca0132_spec *spec = codec->spec; - unsigned int on; + unsigned int on, tmp; int num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT; int err = 0; int idx = nid - EFFECT_START_NID; @@ -3492,6 +3781,39 @@ static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val) /* Voice Focus applies to 2-ch Mic, Digital Mic */ if ((nid == VOICE_FOCUS) && (spec->cur_mic_type != DIGITAL_MIC)) val = 0; + + /* If Voice Focus on SBZ, set to two channel. */ + if ((nid == VOICE_FOCUS) && (spec->quirk == QUIRK_SBZ)) { + if (spec->effects_switch[CRYSTAL_VOICE - + EFFECT_START_NID]) { + + if (spec->effects_switch[VOICE_FOCUS - + EFFECT_START_NID]) { + tmp = FLOAT_TWO; + val = 1; + } else + tmp = FLOAT_ONE; + + dspio_set_uint_param(codec, 0x80, 0x00, tmp); + } + } + /* + * For SBZ noise reduction, there's an extra command + * to module ID 0x47. No clue why. + */ + if ((nid == NOISE_REDUCTION) && (spec->quirk == QUIRK_SBZ)) { + if (spec->effects_switch[CRYSTAL_VOICE - + EFFECT_START_NID]) { + if (spec->effects_switch[NOISE_REDUCTION - + EFFECT_START_NID]) + tmp = FLOAT_ONE; + else + tmp = FLOAT_ZERO; + } else + tmp = FLOAT_ZERO; + + dspio_set_uint_param(codec, 0x47, 0x00, tmp); + } }
codec_dbg(codec, "ca0132_effect_set: nid=0x%x, val=%ld\n", @@ -4126,12 +4448,16 @@ static int ca0132_build_pcms(struct hda_codec *codec) info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0];
- info = snd_hda_codec_pcm_new(codec, "CA0132 Analog Mic-In2"); - if (!info) - return -ENOMEM; - info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture; - info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; - info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[1]; + /* With the DSP enabled, desktops don't use this ADC. */ + if (spec->use_alt_functions) { + info = snd_hda_codec_pcm_new(codec, "CA0132 Analog Mic-In2"); + if (!info) + return -ENOMEM; + info->stream[SNDRV_PCM_STREAM_CAPTURE] = + ca0132_pcm_analog_capture; + info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; + info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[1]; + }
info = snd_hda_codec_pcm_new(codec, "CA0132 What U Hear"); if (!info) @@ -4338,6 +4664,196 @@ static void ca0132_refresh_widget_caps(struct hda_codec *codec) }
/* + * Recon3Di r3di_setup_defaults sub functions. + */ + +static void r3di_dsp_scp_startup(struct hda_codec *codec) +{ + unsigned int tmp; + + tmp = 0x00000000; + dspio_set_uint_param_no_source(codec, 0x80, 0x0A, tmp); + + tmp = 0x00000001; + dspio_set_uint_param_no_source(codec, 0x80, 0x0B, tmp); + + tmp = 0x00000004; + dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); + + tmp = 0x00000005; + dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); + + tmp = 0x00000000; + dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); + +} + +static void r3di_dsp_initial_mic_setup(struct hda_codec *codec) +{ + unsigned int tmp; + + /* Mic 1 Setup */ + chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); + /* This ConnPointID is unique to Recon3Di. Haven't seen it elsewhere */ + chipio_set_conn_rate(codec, 0x0F, SR_96_000); + tmp = FLOAT_ONE; + dspio_set_uint_param(codec, 0x80, 0x00, tmp); + + /* Mic 2 Setup, even though it isn't connected on SBZ */ + chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, SR_96_000); + chipio_set_conn_rate(codec, 0x0F, SR_96_000); + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x80, 0x01, tmp); +} + +/* + * Initialize Sound Blaster Z analog microphones. + */ +static void sbz_init_analog_mics(struct hda_codec *codec) +{ + unsigned int tmp; + + /* Mic 1 Setup */ + chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); + tmp = FLOAT_THREE; + dspio_set_uint_param(codec, 0x80, 0x00, tmp); + + /* Mic 2 Setup, even though it isn't connected on SBZ */ + chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, SR_96_000); + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x80, 0x01, tmp); + +} + +/* + * Sets the source of stream 0x14 to connpointID 0x48, and the destination + * connpointID to 0x91. If this isn't done, the destination is 0x71, and + * you get no sound. I'm guessing this has to do with the Sound Blaster Z + * having an updated DAC, which changes the destination to that DAC. + */ +static void sbz_connect_streams(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + mutex_lock(&spec->chipio_mutex); + + codec_dbg(codec, "Connect Streams entered, mutex locked and loaded.\n"); + + chipio_set_stream_channels(codec, 0x0C, 6); + chipio_set_stream_control(codec, 0x0C, 1); + + /* This value is 0x43 for 96khz, and 0x83 for 192khz. */ + chipio_write_no_mutex(codec, 0x18a020, 0x00000043); + + /* Setup stream 0x14 with it's source and destination points */ + chipio_set_stream_source_dest(codec, 0x14, 0x48, 0x91); + chipio_set_conn_rate_no_mutex(codec, 0x48, SR_96_000); + chipio_set_conn_rate_no_mutex(codec, 0x91, SR_96_000); + chipio_set_stream_channels(codec, 0x14, 2); + chipio_set_stream_control(codec, 0x14, 1); + + codec_dbg(codec, "Connect Streams exited, mutex released.\n"); + + mutex_unlock(&spec->chipio_mutex); + +} + +/* + * Write data through ChipIO to setup proper stream destinations. + * Not sure how it exactly works, but it seems to direct data + * to different destinations. Example is f8 to c0, e0 to c0. + * All I know is, if you don't set these, you get no sound. + */ +static void sbz_chipio_startup_data(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + mutex_lock(&spec->chipio_mutex); + codec_dbg(codec, "Startup Data entered, mutex locked and loaded.\n"); + + /* These control audio output */ + chipio_write_no_mutex(codec, 0x190060, 0x0001f8c0); + chipio_write_no_mutex(codec, 0x190064, 0x0001f9c1); + chipio_write_no_mutex(codec, 0x190068, 0x0001fac6); + chipio_write_no_mutex(codec, 0x19006c, 0x0001fbc7); + /* Signal to update I think */ + chipio_write_no_mutex(codec, 0x19042c, 0x00000001); + + chipio_set_stream_channels(codec, 0x0C, 6); + chipio_set_stream_control(codec, 0x0C, 1); + /* No clue what these control */ + chipio_write_no_mutex(codec, 0x190030, 0x0001e0c0); + chipio_write_no_mutex(codec, 0x190034, 0x0001e1c1); + chipio_write_no_mutex(codec, 0x190038, 0x0001e4c2); + chipio_write_no_mutex(codec, 0x19003c, 0x0001e5c3); + chipio_write_no_mutex(codec, 0x190040, 0x0001e2c4); + chipio_write_no_mutex(codec, 0x190044, 0x0001e3c5); + chipio_write_no_mutex(codec, 0x190048, 0x0001e8c6); + chipio_write_no_mutex(codec, 0x19004c, 0x0001e9c7); + chipio_write_no_mutex(codec, 0x190050, 0x0001ecc8); + chipio_write_no_mutex(codec, 0x190054, 0x0001edc9); + chipio_write_no_mutex(codec, 0x190058, 0x0001eaca); + chipio_write_no_mutex(codec, 0x19005c, 0x0001ebcb); + + chipio_write_no_mutex(codec, 0x19042c, 0x00000001); + + codec_dbg(codec, "Startup Data exited, mutex released.\n"); + mutex_unlock(&spec->chipio_mutex); +} + +/* + * Sound Blaster Z uses these after DSP is loaded. Weird SCP commands + * without a 0x20 source like normal. + */ +static void sbz_dsp_scp_startup(struct hda_codec *codec) +{ + unsigned int tmp; + + tmp = 0x00000003; + dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); + + tmp = 0x00000000; + dspio_set_uint_param_no_source(codec, 0x80, 0x0A, tmp); + + tmp = 0x00000001; + dspio_set_uint_param_no_source(codec, 0x80, 0x0B, tmp); + + tmp = 0x00000004; + dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); + + tmp = 0x00000005; + dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); + + tmp = 0x00000000; + dspio_set_uint_param_no_source(codec, 0x80, 0x0C, tmp); + +} + +static void sbz_dsp_initial_mic_setup(struct hda_codec *codec) +{ + unsigned int tmp; + + chipio_set_stream_control(codec, 0x03, 0); + chipio_set_stream_control(codec, 0x04, 0); + + chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); + chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); + + tmp = FLOAT_THREE; + dspio_set_uint_param(codec, 0x80, 0x00, tmp); + + chipio_set_stream_control(codec, 0x03, 1); + chipio_set_stream_control(codec, 0x04, 1); + + chipio_write(codec, 0x18b098, 0x0000000c); + chipio_write(codec, 0x18b09C, 0x0000000c); +} + +/* * Setup default parameters for DSP */ static void ca0132_setup_defaults(struct hda_codec *codec) @@ -4382,16 +4898,162 @@ static void ca0132_setup_defaults(struct hda_codec *codec) }
/* + * Setup default parameters for Recon3Di DSP. + */ + +static void r3di_setup_defaults(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int tmp; + int num_fx; + int idx, i; + + if (spec->dsp_state != DSP_DOWNLOADED) + return; + + r3di_dsp_scp_startup(codec); + + r3di_dsp_initial_mic_setup(codec); + + /*remove DSP headroom*/ + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x96, 0x3C, tmp); + + /* set WUH source */ + tmp = FLOAT_TWO; + dspio_set_uint_param(codec, 0x31, 0x00, tmp); + chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); + + /* Set speaker source? */ + dspio_set_uint_param(codec, 0x32, 0x00, tmp); + + r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADED); + + /* Setup effect defaults */ + num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; + for (idx = 0; idx < num_fx; idx++) { + for (i = 0; i <= ca0132_effects[idx].params; i++) { + dspio_set_uint_param(codec, + ca0132_effects[idx].mid, + ca0132_effects[idx].reqs[i], + ca0132_effects[idx].def_vals[i]); + } + } + +} + +/* + * Setup default parameters for the Sound Blaster Z DSP. A lot more going on + * than the Chromebook setup. + */ +static void sbz_setup_defaults(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int tmp, stream_format; + int num_fx; + int idx, i; + + if (spec->quirk == QUIRK_SBZ) + sbz_dsp_scp_startup(codec); + + if (spec->dsp_state != DSP_DOWNLOADED) + return; + + sbz_dsp_scp_startup(codec); + + sbz_init_analog_mics(codec); + + sbz_connect_streams(codec); + + sbz_chipio_startup_data(codec); + + chipio_set_stream_control(codec, 0x03, 1); + chipio_set_stream_control(codec, 0x04, 1); + + /* + * Sets internal input loopback to off, used to have a switch to + * enable input loopback, but turned out to be way too buggy. + */ + tmp = FLOAT_ONE; + dspio_set_uint_param(codec, 0x37, 0x08, tmp); + dspio_set_uint_param(codec, 0x37, 0x10, tmp); + + /*remove DSP headroom*/ + tmp = FLOAT_ZERO; + dspio_set_uint_param(codec, 0x96, 0x3C, tmp); + + /* set WUH source */ + tmp = FLOAT_TWO; + dspio_set_uint_param(codec, 0x31, 0x00, tmp); + chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); + + /* Set speaker source? */ + dspio_set_uint_param(codec, 0x32, 0x00, tmp); + + sbz_dsp_initial_mic_setup(codec); + + + /* out, in effects + voicefx */ + num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; + for (idx = 0; idx < num_fx; idx++) { + for (i = 0; i <= ca0132_effects[idx].params; i++) { + dspio_set_uint_param(codec, + ca0132_effects[idx].mid, + ca0132_effects[idx].reqs[i], + ca0132_effects[idx].def_vals[i]); + } + } + + /* + * Have to make a stream to bind the sound output to, otherwise + * you'll get dead audio. Before I did this, it would bind to an + * audio input, and would never work + */ + stream_format = snd_hdac_calc_stream_format(48000, 2, + SNDRV_PCM_FORMAT_S32_LE, 32, 0); + + snd_hda_codec_setup_stream(codec, spec->dacs[0], spec->dsp_stream_id, + 0, stream_format); + + snd_hda_codec_cleanup_stream(codec, spec->dacs[0]); + + snd_hda_codec_setup_stream(codec, spec->dacs[0], spec->dsp_stream_id, + 0, stream_format); + + snd_hda_codec_cleanup_stream(codec, spec->dacs[0]); +} + +/* * Initialization of flags in chip */ static void ca0132_init_flags(struct hda_codec *codec) { - chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0); - chipio_set_control_flag(codec, CONTROL_FLAG_PORT_A_COMMON_MODE, 0); - chipio_set_control_flag(codec, CONTROL_FLAG_PORT_D_COMMON_MODE, 0); - chipio_set_control_flag(codec, CONTROL_FLAG_PORT_A_10KOHM_LOAD, 0); - chipio_set_control_flag(codec, CONTROL_FLAG_PORT_D_10KOHM_LOAD, 0); - chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_HIGH_PASS, 1); + struct ca0132_spec *spec = codec->spec; + + if (spec->use_alt_functions) { + chipio_set_control_flag(codec, CONTROL_FLAG_DSP_96KHZ, 1); + chipio_set_control_flag(codec, CONTROL_FLAG_DAC_96KHZ, 1); + chipio_set_control_flag(codec, CONTROL_FLAG_ADC_B_96KHZ, 1); + chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_96KHZ, 1); + chipio_set_control_flag(codec, CONTROL_FLAG_SRC_RATE_96KHZ, 1); + chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0); + chipio_set_control_flag(codec, CONTROL_FLAG_SPDIF2OUT, 0); + chipio_set_control_flag(codec, + CONTROL_FLAG_PORT_D_10KOHM_LOAD, 0); + chipio_set_control_flag(codec, + CONTROL_FLAG_PORT_A_10KOHM_LOAD, 1); + } else { + chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0); + chipio_set_control_flag(codec, + CONTROL_FLAG_PORT_A_COMMON_MODE, 0); + chipio_set_control_flag(codec, + CONTROL_FLAG_PORT_D_COMMON_MODE, 0); + chipio_set_control_flag(codec, + CONTROL_FLAG_PORT_A_10KOHM_LOAD, 0); + chipio_set_control_flag(codec, + CONTROL_FLAG_PORT_D_10KOHM_LOAD, 0); + chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_HIGH_PASS, 1); + } }
/* @@ -4399,6 +5061,16 @@ static void ca0132_init_flags(struct hda_codec *codec) */ static void ca0132_init_params(struct hda_codec *codec) { + struct ca0132_spec *spec = codec->spec; + + if (spec->use_alt_functions) { + chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); + chipio_set_conn_rate(codec, 0x0B, SR_48_000); + chipio_set_control_param(codec, CONTROL_PARAM_SPDIF1_SOURCE, 0); + chipio_set_control_param(codec, 0, 0); + chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0); + } + chipio_set_control_param(codec, CONTROL_PARAM_PORTA_160OHM_GAIN, 6); chipio_set_control_param(codec, CONTROL_PARAM_PORTD_160OHM_GAIN, 6); } @@ -4490,13 +5162,17 @@ static void ca0132_download_dsp(struct hda_codec *codec) return; /* don't retry failures */
chipio_enable_clocks(codec); - spec->dsp_state = DSP_DOWNLOADING; - if (!ca0132_download_dsp_images(codec)) - spec->dsp_state = DSP_DOWNLOAD_FAILED; - else - spec->dsp_state = DSP_DOWNLOADED; + if (spec->dsp_state != DSP_DOWNLOADED) { + spec->dsp_state = DSP_DOWNLOADING; + + if (!ca0132_download_dsp_images(codec)) + spec->dsp_state = DSP_DOWNLOAD_FAILED; + else + spec->dsp_state = DSP_DOWNLOADED; + }
- if (spec->dsp_state == DSP_DOWNLOADED) + /* For codecs using alt functions, this is already done earlier */ + if (spec->dsp_state == DSP_DOWNLOADED && (!spec->use_alt_functions)) ca0132_set_dsp_msr(codec, true); }
@@ -4543,7 +5219,7 @@ static void ca0132_init_unsol(struct hda_codec *codec) snd_hda_jack_detect_enable_callback(codec, UNSOL_TAG_DSP, ca0132_process_dsp_response); /* Front headphone jack detection */ - if (spec->quirk == QUIRK_SBZ || spec->quirk == QUIRK_R3DI) + if (spec->use_alt_functions) snd_hda_jack_detect_enable_callback(codec, spec->unsol_tag_front_hp, hp_callback); } @@ -4569,6 +5245,7 @@ static struct hda_verb ca0132_base_exit_verbs[] = { };
/* Other verbs tables. Sends after DSP download. */ + static struct hda_verb ca0132_init_verbs0[] = { /* chip init verbs */ {0x15, 0x70D, 0xF0}, @@ -4598,8 +5275,27 @@ static struct hda_verb ca0132_init_verbs0[] = { {0x15, 0x546, 0xC9}, {0x15, 0x53B, 0xCE}, {0x15, 0x5E8, 0xC9}, - {0x15, 0x717, 0x0D}, - {0x15, 0x718, 0x20}, + {} +}; + +/* Extra init verbs for SBZ */ +static struct hda_verb sbz_init_verbs[] = { + {0x15, 0x70D, 0x20}, + {0x15, 0x70E, 0x19}, + {0x15, 0x707, 0x00}, + {0x15, 0x539, 0xCE}, + {0x15, 0x546, 0xC9}, + {0x15, 0x70D, 0xB7}, + {0x15, 0x70E, 0x09}, + {0x15, 0x707, 0x10}, + {0x15, 0x70D, 0xAF}, + {0x15, 0x70E, 0x09}, + {0x15, 0x707, 0x01}, + {0x15, 0x707, 0x05}, + {0x15, 0x70D, 0x73}, + {0x15, 0x70E, 0x09}, + {0x15, 0x707, 0x14}, + {0x15, 0x6FF, 0xC4}, {} };
@@ -4716,12 +5412,16 @@ static void sbz_gpio_shutdown_commands(struct hda_codec *codec, int dir,
static void sbz_exit_chip(struct hda_codec *codec) { + chipio_set_stream_control(codec, 0x03, 0); + chipio_set_stream_control(codec, 0x04, 0);
/* Mess with GPIO */ sbz_gpio_shutdown_commands(codec, 0x07, 0x07, -1); sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x05); sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x01);
+ chipio_set_stream_control(codec, 0x14, 0); + chipio_set_stream_control(codec, 0x0C, 0);
chipio_set_conn_rate(codec, 0x41, SR_192_000); chipio_set_conn_rate(codec, 0x91, SR_192_000); @@ -4732,6 +5432,7 @@ static void sbz_exit_chip(struct hda_codec *codec) sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x07); sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x06);
+ chipio_set_stream_control(codec, 0x0C, 0);
chipio_set_control_param(codec, 0x0D, 0x24);
@@ -4758,28 +5459,264 @@ static void ca0132_exit_chip(struct hda_codec *codec) dsp_reset(codec); }
+/* + * This fixes a problem that was hard to reproduce. Very rarely, I would + * boot up, and there would be no sound, but the DSP indicated it had loaded + * properly. I did a few memory dumps to see if anything was different, and + * there were a few areas of memory uninitialized with a1a2a3a4. This function + * checks if those areas are uninitialized, and if they are, it'll attempt to + * reload the card 3 times. Usually it fixes by the second. + */ +static void sbz_dsp_startup_check(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + unsigned int dsp_data_check[4]; + unsigned int cur_address = 0x390; + unsigned int i; + unsigned int failure = 0; + unsigned int reload = 3; + + if (spec->startup_check_entered) + return; + + spec->startup_check_entered = true; + + for (i = 0; i < 4; i++) { + chipio_read(codec, cur_address, &dsp_data_check[i]); + cur_address += 0x4; + } + for (i = 0; i < 4; i++) { + if (dsp_data_check[i] == 0xa1a2a3a4) + failure = 1; + } + + codec_dbg(codec, "Startup Check: %d ", failure); + if (failure) + codec_info(codec, "DSP not initialized properly. Attempting to fix."); + /* + * While the failure condition is true, and we haven't reached our + * three reload limit, continue trying to reload the driver and + * fix the issue. + */ + while (failure && (reload != 0)) { + codec_info(codec, "Reloading... Tries left: %d", reload); + sbz_exit_chip(codec); + spec->dsp_state = DSP_DOWNLOAD_INIT; + codec->patch_ops.init(codec); + failure = 0; + for (i = 0; i < 4; i++) { + chipio_read(codec, cur_address, &dsp_data_check[i]); + cur_address += 0x4; + } + for (i = 0; i < 4; i++) { + if (dsp_data_check[i] == 0xa1a2a3a4) + failure = 1; + } + reload--; + } + + if (!failure && reload < 3) + codec_info(codec, "DSP fixed."); + + if (!failure) + return; + + codec_info(codec, "DSP failed to initialize properly. Either try a full shutdown or a suspend to clear the internal memory."); +} + +/* + * This is for the extra volume verbs 0x797 (left) and 0x798 (right). These add + * extra precision for decibel values. If you had the dB value in floating point + * you would take the value after the decimal point, multiply by 64, and divide + * by 2. So for 8.59, it's (59 * 64) / 100. Useful if someone wanted to + * implement fixed point or floating point dB volumes. For now, I'll set them + * to 0 just incase a value has lingered from a boot into Windows. + */ +static void ca0132_alt_vol_setup(struct hda_codec *codec) +{ + snd_hda_codec_write(codec, 0x02, 0, 0x797, 0x00); + snd_hda_codec_write(codec, 0x02, 0, 0x798, 0x00); + snd_hda_codec_write(codec, 0x03, 0, 0x797, 0x00); + snd_hda_codec_write(codec, 0x03, 0, 0x798, 0x00); + snd_hda_codec_write(codec, 0x04, 0, 0x797, 0x00); + snd_hda_codec_write(codec, 0x04, 0, 0x798, 0x00); + snd_hda_codec_write(codec, 0x07, 0, 0x797, 0x00); + snd_hda_codec_write(codec, 0x07, 0, 0x798, 0x00); +} + +/* + * Extra commands that don't really fit anywhere else. + */ +static void sbz_pre_dsp_setup(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + writel(0x00820680, spec->mem_base + 0x01C); + writel(0x00820680, spec->mem_base + 0x01C); + + snd_hda_codec_write(codec, 0x15, 0, 0xd00, 0xfc); + snd_hda_codec_write(codec, 0x15, 0, 0xd00, 0xfd); + snd_hda_codec_write(codec, 0x15, 0, 0xd00, 0xfe); + snd_hda_codec_write(codec, 0x15, 0, 0xd00, 0xff); + + chipio_write(codec, 0x18b0a4, 0x000000c2); + + snd_hda_codec_write(codec, 0x11, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, 0x44); +} + +/* + * Extra commands that don't really fit anywhere else. + */ +static void r3di_pre_dsp_setup(struct hda_codec *codec) +{ + chipio_write(codec, 0x18b0a4, 0x000000c2); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x1E); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x1C); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_DATA_WRITE, 0x5B); + + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_LOW, 0x20); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_ADDRESS_HIGH, 0x19); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_DATA_WRITE, 0x00); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_8051_DATA_WRITE, 0x40); + + snd_hda_codec_write(codec, 0x11, 0, + AC_VERB_SET_PIN_WIDGET_CONTROL, 0x04); +} + + +/* + * These are sent before the DSP is downloaded. Not sure + * what they do, or if they're necessary. Could possibly + * be removed. Figure they're better to leave in. + */ +static void sbz_region2_startup(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + writel(0x00000000, spec->mem_base + 0x400); + writel(0x00000000, spec->mem_base + 0x408); + writel(0x00000000, spec->mem_base + 0x40C); + writel(0x00880680, spec->mem_base + 0x01C); + writel(0x00000083, spec->mem_base + 0xC0C); + writel(0x00000030, spec->mem_base + 0xC00); + writel(0x00000000, spec->mem_base + 0xC04); + writel(0x00000003, spec->mem_base + 0xC0C); + writel(0x00000003, spec->mem_base + 0xC0C); + writel(0x00000003, spec->mem_base + 0xC0C); + writel(0x00000003, spec->mem_base + 0xC0C); + writel(0x000000C1, spec->mem_base + 0xC08); + writel(0x000000F1, spec->mem_base + 0xC08); + writel(0x00000001, spec->mem_base + 0xC08); + writel(0x000000C7, spec->mem_base + 0xC08); + writel(0x000000C1, spec->mem_base + 0xC08); + writel(0x00000080, spec->mem_base + 0xC04); +} + +/* + * Extra init functions for alternative ca0132 codecs. Done + * here so they don't clutter up the main ca0132_init function + * anymore than they have to. + */ +static void ca0132_alt_init(struct hda_codec *codec) +{ + struct ca0132_spec *spec = codec->spec; + + ca0132_alt_vol_setup(codec); + + switch (spec->quirk) { + case QUIRK_SBZ: + codec_dbg(codec, "SBZ alt_init"); + ca0132_gpio_init(codec); + sbz_pre_dsp_setup(codec); + snd_hda_sequence_write(codec, spec->chip_init_verbs); + snd_hda_sequence_write(codec, spec->sbz_init_verbs); + break; + case QUIRK_R3DI: + codec_dbg(codec, "R3DI alt_init"); + ca0132_gpio_init(codec); + ca0132_gpio_setup(codec); + r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADING); + r3di_pre_dsp_setup(codec); + snd_hda_sequence_write(codec, spec->chip_init_verbs); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x6FF, 0xC4); + break; + } +} + static int ca0132_init(struct hda_codec *codec) { struct ca0132_spec *spec = codec->spec; struct auto_pin_cfg *cfg = &spec->autocfg; int i; + bool dsp_loaded; + + /* + * If the DSP is already downloaded, and init has been entered again, + * there's only two reasons for it. One, the codec has awaken from a + * suspended state, and in that case dspload_is_loaded will return + * false, and the init will be ran again. The other reason it gets + * re entered is on startup for some reason it triggers a suspend and + * resume state. In this case, it will check if the DSP is downloaded, + * and not run the init function again. For codecs using alt_functions, + * it will check if the DSP is loaded properly. + */ + if (spec->dsp_state == DSP_DOWNLOADED) { + dsp_loaded = dspload_is_loaded(codec); + if (!dsp_loaded) { + spec->dsp_reload = true; + spec->dsp_state = DSP_DOWNLOAD_INIT; + } else { + if (spec->quirk == QUIRK_SBZ) + sbz_dsp_startup_check(codec); + return 0; + } + }
if (spec->dsp_state != DSP_DOWNLOAD_FAILED) spec->dsp_state = DSP_DOWNLOAD_INIT; spec->curr_chip_addx = INVALID_CHIP_ADDRESS;
+ if (spec->quirk == QUIRK_SBZ) + sbz_region2_startup(codec); + snd_hda_power_up_pm(codec);
ca0132_init_unsol(codec); - ca0132_init_params(codec); ca0132_init_flags(codec); + snd_hda_sequence_write(codec, spec->base_init_verbs); + + if (spec->quirk != QUIRK_NONE) + ca0132_alt_init(codec); + ca0132_download_dsp(codec); + ca0132_refresh_widget_caps(codec); - ca0132_setup_defaults(codec); - ca0132_init_analog_mic2(codec); - ca0132_init_dmic(codec); + + if (spec->quirk == QUIRK_SBZ) + writew(0x0107, spec->mem_base + 0x320); + + switch (spec->quirk) { + case QUIRK_R3DI: + r3di_setup_defaults(codec); + break; + case QUIRK_NONE: + case QUIRK_ALIENWARE: + ca0132_setup_defaults(codec); + ca0132_init_analog_mic2(codec); + ca0132_init_dmic(codec); + break; + }
for (i = 0; i < spec->num_outputs; i++) init_output(codec, spec->out_pins[i], spec->dacs[0]); @@ -4791,7 +5728,19 @@ static int ca0132_init(struct hda_codec *codec)
init_input(codec, cfg->dig_in_pin, spec->dig_in);
- snd_hda_sequence_write(codec, spec->chip_init_verbs); + if (!spec->use_alt_functions) { + snd_hda_sequence_write(codec, spec->chip_init_verbs); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PARAM_EX_ID_SET, 0x0D); + snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, + VENDOR_CHIPIO_PARAM_EX_VALUE_SET, 0x20); + } + + if (spec->quirk == QUIRK_SBZ) { + ca0132_gpio_setup(codec); + sbz_setup_defaults(codec); + } + snd_hda_sequence_write(codec, spec->spec_init_verbs);
ca0132_select_out(codec); @@ -4799,6 +5748,15 @@ static int ca0132_init(struct hda_codec *codec)
snd_hda_jack_report_sync(codec);
+ /* + * Re set the PlayEnhancement switch on a resume event, because the + * controls will not be reloaded. + */ + if (spec->dsp_reload) { + spec->dsp_reload = false; + ca0132_pe_switch_set(codec); + } + snd_hda_power_down_pm(codec);
return 0; @@ -4857,7 +5815,7 @@ static void ca0132_config(struct hda_codec *codec) spec->multiout.dac_nids = spec->dacs; spec->multiout.num_dacs = 3;
- if (spec->quirk == QUIRK_NONE || spec->quirk == QUIRK_ALIENWARE) + if (!spec->use_alt_functions) spec->multiout.max_channels = 2; else spec->multiout.max_channels = 6; @@ -4985,6 +5943,8 @@ static int ca0132_prepare_verbs(struct hda_codec *codec) struct ca0132_spec *spec = codec->spec;
spec->chip_init_verbs = ca0132_init_verbs0; + if (spec->quirk == QUIRK_SBZ) + spec->sbz_init_verbs = sbz_init_verbs; spec->spec_init_verbs = kzalloc(sizeof(struct hda_verb) * NUM_SPEC_VERBS, GFP_KERNEL); if (!spec->spec_init_verbs) return -ENOMEM; @@ -5057,10 +6017,22 @@ static int patch_ca0132(struct hda_codec *codec) spec->quirk = QUIRK_NONE; } } + spec->dsp_state = DSP_DOWNLOAD_INIT; spec->num_mixers = 1; spec->mixers[0] = ca0132_mixer;
+ /* Setup whether or not to use alt functions */ + switch (spec->quirk) { + case QUIRK_SBZ: + case QUIRK_R3DI: + spec->use_alt_functions = true; + break; + default: + spec->use_alt_functions = false; + break; + } + spec->base_init_verbs = ca0132_base_init_verbs; spec->base_exit_verbs = ca0132_base_exit_verbs;