Re: [alsa-devel] WM8731 using I2S on omap3 McBSP2 issues

You shouldn't need to touch the DMA code itself, it's normally an issue with the clocks and/or the pinmux code not managing to get the signals required to clock the data transfer.

I noticed the dma code has been changed from what I have.

Also noticed that the beagleboard is getting DMA interrupts when I "aplay":

cat /proc/interrupts | grep DMA

12: 4646 INTC DMA

but I'm not. As I mentioned, I'm at "2.6.29-rc3-omap1", anyone think there is a problem with pcm DMA's in that version?

Thanks

Rick