From: Daniel Mack daniel@caiaq.de
This switches the pxa ssp port usage from network mode to PSP mode. Removed some comments and checks for configured TDM channels. A special case is added to support configuration where BCLK = 64fs. We need to do some black magic in this case which doesn't look nice but there is unfortunately no other option than that.
Diagnosed-by: Tim Ruetz tim@caiaq.de Signed-off-by: Daniel Mack daniel@caiaq.de Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/pxa/pxa-ssp.c | 44 +++++++++++++++++++++++++++++++++----------- 1 files changed, 33 insertions(+), 11 deletions(-)
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index d3fa635..4dd0d7c 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -558,18 +558,17 @@ static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: - sscr0 |= SSCR0_MOD | SSCR0_PSP; + sscr0 |= SSCR0_PSP; sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) { case SND_SOC_DAIFMT_NB_NF: - sspsp |= SSPSP_FSRT; break; case SND_SOC_DAIFMT_NB_IF: - sspsp |= SSPSP_SFRMP | SSPSP_FSRT; + sspsp |= SSPSP_SFRMP; break; case SND_SOC_DAIFMT_IB_IF: - sspsp |= SSPSP_SFRMP; + sspsp |= SSPSP_SFRMP | SSPSP_SCMODE(3); break; default: return -EINVAL; @@ -655,33 +654,56 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sscr0 |= SSCR0_FPCKE; #endif sscr0 |= SSCR0_DataSize(16); - /* use network mode (2 slots) for 16 bit stereo */ break; case SNDRV_PCM_FORMAT_S24_LE: sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8)); - /* we must be in network mode (2 slots) for 24 bit stereo */ break; case SNDRV_PCM_FORMAT_S32_LE: sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16)); - /* we must be in network mode (2 slots) for 32 bit stereo */ break; } ssp_write_reg(ssp, SSCR0, sscr0);
switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: - /* Cleared when the DAI format is set */ - sspsp = ssp_read_reg(ssp, SSPSP) | SSPSP_SFRMWDTH(width); + sspsp = ssp_read_reg(ssp, SSPSP); + + if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) && + (width == 16)) { + /* This is a special case where the bitclk is 64fs + * and we're not dealing with 2*32 bits of audio + * samples. + * + * The SSP values used for that are all found out by + * trying and failing a lot; some of the registers + * needed for that mode are only available on PXA3xx. + */ + +#ifdef CONFIG_PXA3xx + if (!cpu_is_pxa3xx()) + return -EINVAL; + + sspsp |= SSPSP_SFRMWDTH(width * 2); + sspsp |= SSPSP_SFRMDLY(width * 4); + sspsp |= SSPSP_EDMYSTOP(3); + sspsp |= SSPSP_DMYSTOP(3); + sspsp |= SSPSP_DMYSTRT(1); +#else + return -EINVAL; +#endif + } else + sspsp |= SSPSP_SFRMWDTH(width); + ssp_write_reg(ssp, SSPSP, sspsp); break; default: break; }
- /* We always use a network mode so we always require TDM slots + /* When we use a network mode, we always require TDM slots * - complain loudly and fail if they've not been set up yet. */ - if (!(ssp_read_reg(ssp, SSTSA) & 0xf)) { + if ((sscr0 & SSCR0_MOD) && !(ssp_read_reg(ssp, SSTSA) & 0xf)) { dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n"); return -EINVAL; }