3 Nov
2015
3 Nov
'15
10:44 a.m.
On Tue, Nov 03, 2015 at 11:06:32AM +0900, JongHo Kim wrote:
Change the xinvert value from 0 to 1 on the "Capture Switch" control WM8960 datasheet is shown as follows: Bit 7 at 00h and 01h register address 1 : Enable Mute, 0 : Disable Mute
Signed-off-by: JongHo Kim furmuwon@gmail.com
Acked-by: Charles Keepax ckeepax@opensource.wolfsonmicro.com
Thanks, Charles