Happened when the Playback (or Capture) is running continuously and Capture (or Playback) is restarted (xrun, manual stop/start...)
Since the RX (or TX) FIFO are only reset when the whole SSI is disabled, pending samples from previous capture (or playback) session may still be present. They must be erased to not introduce channel slipping.
FIFO Clear register fields are documented in IMX51, IMX35 reference manual. They are not documented in IMX50 or IMX6 RM, despite they are working as expected on IMX6SL.
Signed-off-by: Arnaud Mouiche arnaud.mouiche@invoxia.com --- sound/soc/fsl/fsl_ssi.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index c71e194..576a72b 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -404,6 +404,22 @@ static void fsl_ssi_config(struct fsl_ssi_private *ssi_private, bool enable, * (online configuration) */ if (enable) { + /* + * Clear RX or TX FIFO to remove samples from the previous stream + * session which may be still present in the FIFO and may + * introduce bad samples and/or channel slipping. + * + * Note: The SOR is not documented in recent IMX datasheet, but + * is described in IMX51 reference manual at section 56.3.3.15. + */ + if (vals->scr & CCSR_SSI_SCR_RE) { + regmap_update_bits(regs, CCSR_SSI_SOR, + CCSR_SSI_SOR_RX_CLR, CCSR_SSI_SOR_RX_CLR ); + } else { + regmap_update_bits(regs, CCSR_SSI_SOR, + CCSR_SSI_SOR_TX_CLR, CCSR_SSI_SOR_TX_CLR ); + } + regmap_update_bits(regs, CCSR_SSI_SRCR, vals->srcr, vals->srcr); regmap_update_bits(regs, CCSR_SSI_STCR, vals->stcr, vals->stcr); regmap_update_bits(regs, CCSR_SSI_SIER, vals->sier, vals->sier);