Re: [alsa-devel] [RFC PATCH 1/7] soundwire: Add sysfs support for master(s)

On Fri, May 03, 2019 at 08:00:24PM -0500, Pierre-Louis Bossart wrote:

For each master N, add a device sdw-master:N and add the master properties as attributes.

Credits: this patch is based on an earlier internal contribution by Vinod Koul, Sanyog Kale, Shreyas Nc and Hardik Shah.

Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com

drivers/soundwire/Makefile | 3 +- drivers/soundwire/bus.c | 6 ++ drivers/soundwire/sysfs.c | 162 ++++++++++++++++++++++++++++++++++ include/linux/soundwire/sdw.h | 10 +++ 4 files changed, 180 insertions(+), 1 deletion(-) create mode 100644 drivers/soundwire/sysfs.c

diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile index 5817beaca0e1..787f1cbf342c 100644 --- a/drivers/soundwire/Makefile +++ b/drivers/soundwire/Makefile @@ -3,7 +3,8 @@ #

#Bus Objs -soundwire-bus-objs := bus_type.o bus.o slave.o mipi_disco.o stream.o +soundwire-bus-objs := bus_type.o bus.o slave.o mipi_disco.o stream.o \

• 	sysfs.o
  

obj-$(CONFIG_SOUNDWIRE_BUS) += soundwire-bus.o

#Cadence Objs diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index fe745830a261..38de7071e135 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -49,6 +49,10 @@ int sdw_add_bus_master(struct sdw_bus *bus) } }

• ret = sdw_sysfs_bus_init(bus);
• if (ret < 0)

• dev_warn(bus->dev, "Bus sysfs init failed:%d\n", ret);
  

• /*
  • Device numbers in SoundWire are 0 through 15. Enumeration device
  • number (0), Broadcast device number (15), Group numbers (12 and

@@ -129,6 +133,8 @@ static int sdw_delete_slave(struct device *dev, void *data) */ void sdw_delete_bus_master(struct sdw_bus *bus) {

• sdw_sysfs_bus_exit(bus);
• device_for_each_child(bus->dev, NULL, sdw_delete_slave);

} EXPORT_SYMBOL(sdw_delete_bus_master); diff --git a/drivers/soundwire/sysfs.c b/drivers/soundwire/sysfs.c new file mode 100644 index 000000000000..7b6c3826a73a --- /dev/null +++ b/drivers/soundwire/sysfs.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-19 Intel Corporation.

+#include <linux/device.h> +#include <linux/mod_devicetable.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/soundwire/sdw.h> +#include <linux/soundwire/sdw_type.h> +#include "bus.h"

+struct sdw_master_sysfs {

• struct device dev;
• struct sdw_bus *bus;

+};

+#define to_sdw_device(_dev) \

• container_of(_dev, struct sdw_master_sysfs, dev)

+/*

• • The sysfs for properties reflects the MIPI description as given
• • in the MIPI DisCo spec
• • Base file is:
• • sdw-master-N

• •  |---- revision
    

• •  |---- clk_stop_modes
    

• •  |---- max_clk_freq
    

• •  |---- clk_freq
    

• •  |---- clk_gears
    

• •  |---- default_row
    

• •  |---- default_col
    

• •  |---- dynamic_shape
    

• •  |---- err_threshold
    

• */

+#define sdw_master_attr(field, format_string) \ +static ssize_t field##_show(struct device *dev, \

• 	    struct device_attribute *attr,		\
  

• 	    char *buf)					\
  

+{ \

• struct sdw_master_sysfs *master = to_sdw_device(dev); \
• return sprintf(buf, format_string, master->bus->prop.field); \

+} \ +static DEVICE_ATTR_RO(field)

+sdw_master_attr(revision, "0x%x\n"); +sdw_master_attr(clk_stop_modes, "0x%x\n"); +sdw_master_attr(max_clk_freq, "%d\n"); +sdw_master_attr(default_row, "%d\n"); +sdw_master_attr(default_col, "%d\n"); +sdw_master_attr(default_frame_rate, "%d\n"); +sdw_master_attr(dynamic_frame, "%d\n"); +sdw_master_attr(err_threshold, "%d\n");

+static ssize_t clock_frequencies_show(struct device *dev,

• 		      struct device_attribute *attr, char *buf)
  

+{

• struct sdw_master_sysfs *master = to_sdw_device(dev);
• ssize_t size = 0;
• int i;
• for (i = 0; i < master->bus->prop.num_clk_freq; i++)

• size += sprintf(buf + size, "%8d ",
  

• 		master->bus->prop.clk_freq[i]);
  

• size += sprintf(buf + size, "\n");
• return size;

+} +static DEVICE_ATTR_RO(clock_frequencies);

+static ssize_t clock_gears_show(struct device *dev,

• 		struct device_attribute *attr, char *buf)
  

+{

• struct sdw_master_sysfs *master = to_sdw_device(dev);
• ssize_t size = 0;
• int i;
• for (i = 0; i < master->bus->prop.num_clk_gears; i++)

• size += sprintf(buf + size, "%8d ",
  

• 		master->bus->prop.clk_gears[i]);
  

• size += sprintf(buf + size, "\n");
• return size;

+} +static DEVICE_ATTR_RO(clock_gears);

+static struct attribute *master_node_attrs[] = {

• &dev_attr_revision.attr,
• &dev_attr_clk_stop_modes.attr,
• &dev_attr_max_clk_freq.attr,
• &dev_attr_default_row.attr,
• &dev_attr_default_col.attr,
• &dev_attr_default_frame_rate.attr,
• &dev_attr_dynamic_frame.attr,
• &dev_attr_err_threshold.attr,
• &dev_attr_clock_frequencies.attr,
• &dev_attr_clock_gears.attr,
• NULL,

+};

+static const struct attribute_group sdw_master_node_group = {

• .attrs = master_node_attrs,

+};

+static const struct attribute_group *sdw_master_node_groups[] = {

• &sdw_master_node_group,
• NULL

+};

Minor nit, you can use the ATTRIBUTE_GROUPS() macro here to save you a few lines.

+static void sdw_device_release(struct device *dev) +{

• struct sdw_master_sysfs *master = to_sdw_device(dev);
• kfree(master);

+}

+static struct device_type sdw_device_type = {

• .name = "sdw_device",
• .release = sdw_device_release,

+};

+int sdw_sysfs_bus_init(struct sdw_bus *bus) +{

• struct sdw_master_sysfs *master;
• int err;
• if (bus->sysfs) {

• dev_err(bus->dev, "SDW sysfs is already initialized\n");
  

• return -EIO;
  

• }
• master = kzalloc(sizeof(*master), GFP_KERNEL);
• if (!master)

• return -ENOMEM;
  

Why are you creating a whole new device to put all of this under? Is this needed? What will the sysfs tree look like when you do this? Why can't the "bus" device just get all of these attributes and no second device be created?

thanks,

greg k-h