Hi Jiada
Thanks for your feedback
1ch: (tdm_slots < 4) Basic mode, (tdm_slots >= 4) TDM Split mode 2ch: (2 <= tdm_slots < 8) Basic mode, (tdm_slots >= 8) TDM Ex-Split mode 4ch: (4 <= tdm_slots < 8) Basic mode, (tdm_slots >= 8) TDM Ex-Split mode 6ch: (6 <= tdm_slots < 8) Basic mode, (tdm_slots == 8) TDM Extended mode, (8 < tdm_slots) TDM Ex-Split mode 8ch: (6 <= tdm_slots < 8) TDM Extended mode, (8 <= tdm_slots < 16) Basic mode, (tdm_slots == 16) TDM Ex-Split 10ch: TDM Ex-Split mode 16ch: Basic Mode
Sorry, but I couldn't understand what this table means ? For example, what does "1ch" mean ? It looks like "1ch playback by TDM"...
The reason I added rsnd_ssi_select_busif(io, chan) in rsnd_hw_params() in patch ASoC: rsnd: add busif property to dai stream of v2 patch-set, is because runtime channel is necessary information to determine which BUSIFx to select, (which is mentioned in above) and at this stage (rsnd_hw_params()), all other control settings (register setting, dma address calculation etc) haven't been done, so corresponding dai-link can be considered to be not active at this timing but maybe you have better suggestion when to automatically select BUSIFx
My image is like this.
sound { compatible = "simple-scu-audio-card or new card"; ... simple-audio-card,convert-channels = <8>; ... busif0: simple-audio-card,cpu@0 { sound-dai = <&rcar_sound 0>; }; busif1: simple-audio-card,cpu@1 { sound-dai = <&rcar_sound 1>; }; busif2: simple-audio-card,cpu@2 { sound-dai = <&rcar_sound 2>; }; busif3: simple-audio-card,cpu@3 { sound-dai = <&rcar_sound 3>; }; simple-audio-card,codec { sound-dai = <&xxx>; }; };
rcar_sound { dai0 { playback = <&ssiu0 ssi0>; } dai1 { playback = <&ssiu1 ssi0>; } dai2 { playback = <&ssiu2 ssi0>; } dai3 { playback = <&ssiu3 ssi0>; } };
Best regards --- Kuninori Morimoto