Add driver for M2Tech hiFace USB-SPDIF interface and compatible devices.
The supported products are:
* M2Tech Young * M2Tech hiFace * M2Tech North Star * M2Tech W4S Young * M2Tech Corrson * M2Tech AUDIA * M2Tech SL Audio * M2Tech Empirical * M2Tech Rockna * M2Tech Pathos * M2Tech Metronome * M2Tech CAD * M2Tech Audio Esclusive * M2Tech Rotel * M2Tech Eeaudio * The Chord Company CHORD * AVA Group A/S Vitus
Signed-off-by: Antonio Ospite ao2@amarulasolutions.com ---
Hi,
this is my first ALSA driver I still have some doubts and I marked them in the comments below with a XXX prefix, could someone please take a look at them?
I plan on submitting a version 2 of the driver after I get some feedback, especially on those doubts.
I also noticed that many drivers under sound/usb/ have text in the Kconfig entry stating "Say Y here to include support for ..." but I only see "[N/m/?]" as options when I run "make oldconfig" maybe because of some dependency, I am not sure, should such text be removed in order to avoid confusion?
Thanks, Antonio
sound/usb/Kconfig | 33 +++ sound/usb/Makefile | 2 +- sound/usb/hiface/Makefile | 2 + sound/usb/hiface/chip.c | 331 ++++++++++++++++++++++ sound/usb/hiface/chip.h | 34 +++ sound/usb/hiface/pcm.c | 666 +++++++++++++++++++++++++++++++++++++++++++++ sound/usb/hiface/pcm.h | 24 ++ 7 files changed, 1091 insertions(+), 1 deletion(-) create mode 100644 sound/usb/hiface/Makefile create mode 100644 sound/usb/hiface/chip.c create mode 100644 sound/usb/hiface/chip.h create mode 100644 sound/usb/hiface/pcm.c create mode 100644 sound/usb/hiface/pcm.h
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig index 225dfd7..2b206e8 100644 --- a/sound/usb/Kconfig +++ b/sound/usb/Kconfig @@ -115,5 +115,38 @@ config SND_USB_6FIRE and further help can be found at http://sixfireusb.sourceforge.net
+config SND_USB_HIFACE + tristate "M2Tech hiFace USB-SPDIF driver" + select SND_PCM + help + Say Y here to include support for M2Tech hiFace USB-SPDIF interface. + + M2Tech hiFace and compatible devices offer a Hi-End S/PDIF Output + Interface, see http://www.m2tech.biz/hiface.html + + This driver supports the original M2Tech hiFace and some other + compatible devices. The supported products are: + + * M2Tech Young + * M2Tech hiFace + * M2Tech North Star + * M2Tech W4S Young + * M2Tech Corrson + * M2Tech AUDIA + * M2Tech SL Audio + * M2Tech Empirical + * M2Tech Rockna + * M2Tech Pathos + * M2Tech Metronome + * M2Tech CAD + * M2Tech Audio Esclusive + * M2Tech Rotel + * M2Tech Eeaudio + * The Chord Company CHORD + * AVA Group A/S Vitus + + To compile this driver as a module, choose M here: the module + will be called snd-usb-hiface. + endif # SND_USB
diff --git a/sound/usb/Makefile b/sound/usb/Makefile index ac256dc..abe668f 100644 --- a/sound/usb/Makefile +++ b/sound/usb/Makefile @@ -23,4 +23,4 @@ obj-$(CONFIG_SND_USB_UA101) += snd-usbmidi-lib.o obj-$(CONFIG_SND_USB_USX2Y) += snd-usbmidi-lib.o obj-$(CONFIG_SND_USB_US122L) += snd-usbmidi-lib.o
-obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ +obj-$(CONFIG_SND) += misc/ usx2y/ caiaq/ 6fire/ hiface/ diff --git a/sound/usb/hiface/Makefile b/sound/usb/hiface/Makefile new file mode 100644 index 0000000..463b136 --- /dev/null +++ b/sound/usb/hiface/Makefile @@ -0,0 +1,2 @@ +snd-usb-hiface-objs := chip.o pcm.o +obj-$(CONFIG_SND_USB_HIFACE) += snd-usb-hiface.o diff --git a/sound/usb/hiface/chip.c b/sound/usb/hiface/chip.c new file mode 100644 index 0000000..dce74e9 --- /dev/null +++ b/sound/usb/hiface/chip.c @@ -0,0 +1,331 @@ +/* + * Linux driver for M2Tech HiFace compatible devices + * + * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V. + * + * Authors: Michael Trimarchi michael@amarulasolutions.com + * Antonio Ospite ao2@amarulasolutions.com + * + * The driver is based on the work done in TerraTec DMX 6Fire USB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <sound/initval.h> + +#include "chip.h" +#include "pcm.h" + +MODULE_AUTHOR("Michael Trimarchi michael@amarulasolutions.com"); +MODULE_AUTHOR("Antonio Ospite ao2@amarulasolutions.com"); +MODULE_DESCRIPTION("M2Tech HiFace USB audio driver"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("{{HiFace, Evo}}"); + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-max */ +static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* Id for card */ +static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; /* Enable this card */ + +#define DRIVER_NAME "snd-usb-hiface" +#define CARD_NAME "HiFace" + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for " CARD_NAME " soundcard."); +module_param_array(id, charp, NULL, 0444); +MODULE_PARM_DESC(id, "ID string for " CARD_NAME " soundcard."); +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable " CARD_NAME " soundcard."); + +static struct hiface_chip *chips[SNDRV_CARDS] = SNDRV_DEFAULT_PTR; + +static DEFINE_MUTEX(register_mutex); + +struct hiface_vendor_quirk { + const char *device_name; + u8 extra_freq; +}; + +static int hiface_dev_free(struct snd_device *device) +{ + struct hiface_chip *chip = device->device_data; + kfree(chip); + return 0; +} + +static int hiface_chip_create(struct usb_device *device, int idx, + const struct hiface_vendor_quirk *quirk, + struct hiface_chip **rchip) +{ + struct snd_card *card = NULL; + struct hiface_chip *chip; + int ret; + static struct snd_device_ops ops = { + .dev_free = hiface_dev_free, + }; + + *rchip = NULL; + + /* if we are here, card can be registered in alsa. */ + ret = snd_card_create(index[idx], id[idx], THIS_MODULE, 0, &card); + if (ret < 0) { + snd_printk(KERN_ERR "cannot create alsa card.\n"); + return ret; + } + + strcpy(card->driver, DRIVER_NAME); + + if (quirk && quirk->device_name) + strcpy(card->shortname, quirk->device_name); + else + strcpy(card->shortname, "M2Tech generic audio"); + + sprintf(card->longname, "%s at %d:%d", card->shortname, + device->bus->busnum, device->devnum); + + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) { + snd_card_free(card); + return -ENOMEM; + } + + chip->dev = device; + chip->index = idx; + chip->card = card; + + ret = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (ret < 0) { + kfree(chip); + snd_card_free(card); + return ret; + } + + *rchip = chip; + return 0; +} + +static int hiface_chip_probe(struct usb_interface *intf, + const struct usb_device_id *usb_id) +{ + const struct hiface_vendor_quirk *quirk = (struct hiface_vendor_quirk *)usb_id->driver_info; + int ret; + int i; + struct hiface_chip *chip; + struct usb_device *device = interface_to_usbdev(intf); + + pr_info("Probe " DRIVER_NAME " driver.\n"); + + ret = usb_set_interface(device, 0, 0); + if (ret != 0) { + snd_printk(KERN_ERR "can't set first interface for " CARD_NAME " device.\n"); + return -EIO; + } + + /* check whether the card is already registered */ + chip = NULL; + mutex_lock(®ister_mutex); + for (i = 0; i < SNDRV_CARDS; i++) { + if (chips[i] && chips[i]->dev == device) { + if (chips[i]->shutdown) { + snd_printk(KERN_ERR CARD_NAME " device is in the shutdown state, cannot create a card instance\n"); + ret = -ENODEV; + goto err; + } + chip = chips[i]; + break; + } + } + if (!chip) { + /* it's a fresh one. + * now look for an empty slot and create a new card instance + */ + for (i = 0; i < SNDRV_CARDS; i++) + if (enable[i] && !chips[i]) { + ret = hiface_chip_create(device, i, quirk, + &chip); + if (ret < 0) + goto err; + + snd_card_set_dev(chip->card, &intf->dev); + break; + } + if (!chip) { + snd_printk(KERN_ERR "no available " CARD_NAME " audio device\n"); + ret = -ENODEV; + goto err; + } + } + + ret = hiface_pcm_init(chip, quirk ? quirk->extra_freq : 0); + if (ret < 0) + goto err_chip_destroy; + + ret = snd_card_register(chip->card); + if (ret < 0) { + snd_printk(KERN_ERR "cannot register " CARD_NAME " card\n"); + goto err_chip_destroy; + } + + chips[chip->index] = chip; + chip->intf_count++; + + mutex_unlock(®ister_mutex); + + usb_set_intfdata(intf, chip); + return 0; + +err_chip_destroy: + snd_card_free(chip->card); +err: + mutex_unlock(®ister_mutex); + return ret; +} + +static void hiface_chip_disconnect(struct usb_interface *intf) +{ + struct hiface_chip *chip; + struct snd_card *card; + + pr_debug("%s: called.\n", __func__); + + chip = usb_get_intfdata(intf); + if (!chip) + return; + + card = chip->card; + chip->intf_count--; + if (chip->intf_count <= 0) { + /* Make sure that the userspace cannot create new request */ + snd_card_disconnect(card); + + mutex_lock(®ister_mutex); + chips[chip->index] = NULL; + mutex_unlock(®ister_mutex); + + chip->shutdown = true; + hiface_pcm_abort(chip); + snd_card_free_when_closed(card); + } +} + +static struct usb_device_id device_table[] = { + { + USB_DEVICE(0x04b4, 0x0384), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Young", + .extra_freq = 1, + } + }, + { + USB_DEVICE(0x04b4, 0x930b), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "hiFace", + } + }, + { + USB_DEVICE(0x04b4, 0x931b), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "North Star", + } + }, + { + USB_DEVICE(0x04b4, 0x931c), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "W4S Young", + } + }, + { + USB_DEVICE(0x04b4, 0x931d), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Corrson", + } + }, + { + USB_DEVICE(0x04b4, 0x931e), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "AUDIA", + } + }, + { + USB_DEVICE(0x04b4, 0x931f), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "SL Audio", + } + }, + { + USB_DEVICE(0x04b4, 0x9320), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Empirical", + } + }, + { + USB_DEVICE(0x04b4, 0x9321), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Rockna", + } + }, + { + USB_DEVICE(0x249c, 0x9001), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Pathos", + } + }, + { + USB_DEVICE(0x249c, 0x9002), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Metronome", + } + }, + { + USB_DEVICE(0x249c, 0x9006), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "CAD", + } + }, + { + USB_DEVICE(0x249c, 0x9008), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Audio Esclusive", + } + }, + { + USB_DEVICE(0x249c, 0x931c), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Rotel", + } + }, + { + USB_DEVICE(0x249c, 0x932c), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Eeaudio", + } + }, + { + USB_DEVICE(0x245f, 0x931c), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "CHORD", + } + }, + { + USB_DEVICE(0x25c6, 0x9002), + .driver_info = (unsigned long)&(const struct hiface_vendor_quirk) { + .device_name = "Vitus", + } + }, + {} +}; + +MODULE_DEVICE_TABLE(usb, device_table); + +static struct usb_driver hiface_usb_driver = { + .name = DRIVER_NAME, + .probe = hiface_chip_probe, + .disconnect = hiface_chip_disconnect, + .id_table = device_table, +}; + +module_usb_driver(hiface_usb_driver); diff --git a/sound/usb/hiface/chip.h b/sound/usb/hiface/chip.h new file mode 100644 index 0000000..c2e9fda --- /dev/null +++ b/sound/usb/hiface/chip.h @@ -0,0 +1,34 @@ +/* + * Linux driver for M2Tech HiFace compatible devices + * + * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V. + * + * Authors: Michael Trimarchi michael@amarulasolutions.com + * Antonio Ospite ao2@amarulasolutions.com + * + * The driver is based on the work done in TerraTec DMX 6Fire USB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef HIFACE_CHIP_H +#define HIFACE_CHIP_H + +#include <linux/usb.h> +#include <sound/core.h> + +struct pcm_runtime; + +struct hiface_chip { + struct usb_device *dev; + struct snd_card *card; + int intf_count; /* number of registered interfaces */ + int index; /* index in module parameter arrays */ + bool shutdown; + + struct pcm_runtime *pcm; +}; +#endif /* HIFACE_CHIP_H */ diff --git a/sound/usb/hiface/pcm.c b/sound/usb/hiface/pcm.c new file mode 100644 index 0000000..34fe0ed --- /dev/null +++ b/sound/usb/hiface/pcm.c @@ -0,0 +1,666 @@ +/* + * Linux driver for M2Tech HiFace compatible devices + * + * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V. + * + * Authors: Michael Trimarchi michael@amarulasolutions.com + * Antonio Ospite ao2@amarulasolutions.com + * + * The driver is based on the work done in TerraTec DMX 6Fire USB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/slab.h> +#include <sound/pcm.h> + +#include "pcm.h" +#include "chip.h" + +#define OUT_EP 0x2 +#define PCM_N_URBS 8 +#define PCM_MAX_PACKET_SIZE 4096 +#define MAX_BUFSIZE (2 * PCM_N_URBS * PCM_MAX_PACKET_SIZE) + +struct pcm_urb { + struct hiface_chip *chip; + + struct urb instance; + struct usb_anchor submitted; + u8 *buffer; +}; + +struct pcm_substream { + spinlock_t lock; + struct snd_pcm_substream *instance; + + bool active; + snd_pcm_uframes_t dma_off; /* current position in alsa dma_area */ + snd_pcm_uframes_t period_off; /* current position in current period */ +}; + +enum { /* pcm streaming states */ + STREAM_DISABLED, /* no pcm streaming */ + STREAM_STARTING, /* pcm streaming requested, waiting to become ready */ + STREAM_RUNNING, /* pcm streaming running */ + STREAM_STOPPING +}; + +struct pcm_runtime { + struct hiface_chip *chip; + struct snd_pcm *instance; + + struct pcm_substream playback; + bool panic; /* if set driver won't do anymore pcm on device */ + + struct pcm_urb out_urbs[PCM_N_URBS]; + + struct mutex stream_mutex; + u8 stream_state; /* one of STREAM_XXX */ + u8 rate; /* one of PCM_RATE_XXX */ + u8 extra_freq; + wait_queue_head_t stream_wait_queue; + bool stream_wait_cond; +}; + +static const unsigned int rates[] = { 44100, 48000, 88200, 96000, 176400, 192000, + 352800, 384000 }; +static struct snd_pcm_hw_constraint_list constraints_rates = { + .count = ARRAY_SIZE(rates) - 2, /* by default rates up to 192000 are supported */ + .list = rates, + .mask = 0, +}; + +static const int rates_alsaid[] = { + SNDRV_PCM_RATE_44100, SNDRV_PCM_RATE_48000, + SNDRV_PCM_RATE_88200, SNDRV_PCM_RATE_96000, + SNDRV_PCM_RATE_176400, SNDRV_PCM_RATE_192000, + SNDRV_PCM_RATE_KNOT, SNDRV_PCM_RATE_KNOT }; + +static const struct snd_pcm_hardware pcm_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_PAUSE | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, + + .formats = SNDRV_PCM_FMTBIT_S32_LE, + + .rates = SNDRV_PCM_RATE_44100 | + SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_88200 | + SNDRV_PCM_RATE_96000 | + SNDRV_PCM_RATE_176400 | + SNDRV_PCM_RATE_192000 | + SNDRV_PCM_RATE_KNOT, + + .rate_min = 44100, + .rate_max = 192000, /* changes in hiface_pcm_open to support extra rates */ + .channels_min = 2, + .channels_max = 2, + .buffer_bytes_max = MAX_BUFSIZE, + .period_bytes_min = PCM_MAX_PACKET_SIZE, + .period_bytes_max = MAX_BUFSIZE, + .periods_min = 2, + .periods_max = 1024 +}; + +static int hiface_pcm_set_rate(struct pcm_runtime *rt, unsigned int rate) +{ + u8 rate_value[] = { 0x43, 0x4b, 0x42, 0x4a, 0x40, 0x48, 0x58, 0x68 }; + int ret; + struct usb_device *device = rt->chip->dev; + + /* We are already sure that the rate is supported here thanks to the + * contraints set in hiface_pcm_open(), but we have to retrieve the + * index to access rate_value. + */ + for (rt->rate = 0; rt->rate < ARRAY_SIZE(rates); rt->rate++) + if (rate == rates[rt->rate]) + break; + + if (unlikely(rt->rate == ARRAY_SIZE(rates))) { + pr_err("Unsupported rate %d\n", rate); + return -EINVAL; + } + + /* + * USBIO: Vendor 0xb0(wValue=0x0043, wIndex=0x0000) + * 43 b0 43 00 00 00 00 00 + * USBIO: Vendor 0xb0(wValue=0x004b, wIndex=0x0000) + * 43 b0 4b 00 00 00 00 00 + * This control message doesn't have any ack from the + * other side + */ + ret = usb_control_msg(device, usb_sndctrlpipe(device, 0), + 0xb0, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_OTHER, + rate_value[rt->rate], 0, NULL, 0, 100); + if (ret < 0) { + snd_printk(KERN_ERR "Error setting samplerate %d.\n", + rates[rt->rate]); + return ret; + } + + return 0; +} + +static struct pcm_substream *hiface_pcm_get_substream( + struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + + if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) + return &rt->playback; + + pr_debug("Error getting pcm substream slot.\n"); + return NULL; +} + +/* call with stream_mutex locked */ +static void hiface_pcm_stream_stop(struct pcm_runtime *rt) +{ + int i, time; + + if (rt->stream_state != STREAM_DISABLED) { + rt->stream_state = STREAM_STOPPING; + + for (i = 0; i < PCM_N_URBS; i++) { + time = usb_wait_anchor_empty_timeout( + &rt->out_urbs[i].submitted, 100); + if (!time) + usb_kill_anchored_urbs( + &rt->out_urbs[i].submitted); + usb_kill_urb(&rt->out_urbs[i].instance); + } + + rt->stream_state = STREAM_DISABLED; + } +} + +/* call with stream_mutex locked */ +static int hiface_pcm_stream_start(struct pcm_runtime *rt) +{ + int ret = 0, i; + + if (rt->stream_state == STREAM_DISABLED) { + /* submit our out urbs zero init */ + rt->stream_state = STREAM_STARTING; + for (i = 0; i < PCM_N_URBS; i++) { + memset(rt->out_urbs[i].buffer, 0, PCM_MAX_PACKET_SIZE); + usb_anchor_urb(&rt->out_urbs[i].instance, + &rt->out_urbs[i].submitted); + ret = usb_submit_urb(&rt->out_urbs[i].instance, + GFP_ATOMIC); + if (ret) { + hiface_pcm_stream_stop(rt); + return ret; + } + } + + /* wait for first out urb to return (sent in in urb handler) */ + wait_event_timeout(rt->stream_wait_queue, rt->stream_wait_cond, + HZ); + if (rt->stream_wait_cond) { + pr_debug("%s: Stream is running wakeup event\n", + __func__); + rt->stream_state = STREAM_RUNNING; + } else { + hiface_pcm_stream_stop(rt); + return -EIO; + } + } + return ret; +} + + +/* The hardware wants word-swapped 32-bit values */ +void memcpy_swahw32(u8 *dest, u8 *src, unsigned int n) +{ + unsigned int i; + + for (i = 0; i < n / 4; i++) + ((u32 *)dest)[i] = swahw32(((u32 *)src)[i]); +} + +/* call with substream locked */ +static int hiface_pcm_playback(struct pcm_substream *sub, + struct pcm_urb *urb) +{ + struct snd_pcm_runtime *alsa_rt = sub->instance->runtime; + u8 *source; + unsigned int pcm_buffer_size; + + /* XXX Can an invalid format make it to here? + * Isn't ALSA checking pcm_hw.formats ? + */ + if (alsa_rt->format != SNDRV_PCM_FORMAT_S32_LE) { + pr_err("Unsupported sample format\n"); + return -EINVAL; + } + + pcm_buffer_size = snd_pcm_lib_buffer_bytes(sub->instance); + + if (sub->dma_off + PCM_MAX_PACKET_SIZE <= pcm_buffer_size) { + pr_debug("%s: (1) buffer_size %#x dma_offset %#x\n", __func__, + (unsigned int) pcm_buffer_size, + (unsigned int) sub->dma_off); + + source = alsa_rt->dma_area + sub->dma_off; + memcpy_swahw32(urb->buffer, source, PCM_MAX_PACKET_SIZE); + } else { + /* wrap around at end of ring buffer */ + unsigned int len; + + pr_debug("%s: (2) buffer_size %#x dma_offset %#x\n", __func__, + (unsigned int) pcm_buffer_size, + (unsigned int) sub->dma_off); + + len = pcm_buffer_size - sub->dma_off; + + source = alsa_rt->dma_area + sub->dma_off; + memcpy_swahw32(urb->buffer, source, len); + + source = alsa_rt->dma_area; + memcpy_swahw32(urb->buffer + len, source, + PCM_MAX_PACKET_SIZE - len); + } + sub->dma_off += PCM_MAX_PACKET_SIZE; + if (sub->dma_off >= pcm_buffer_size) + sub->dma_off -= pcm_buffer_size; + + sub->period_off += PCM_MAX_PACKET_SIZE; + + return 0; +} + +static void hiface_pcm_out_urb_handler(struct urb *usb_urb) +{ + struct pcm_urb *out_urb = usb_urb->context; + struct pcm_runtime *rt = out_urb->chip->pcm; + struct pcm_substream *sub; + unsigned long flags; + + pr_debug("%s: called.\n", __func__); + + if (usb_urb->status || rt->panic || rt->stream_state == STREAM_STOPPING) + return; + + if (rt->stream_state == STREAM_STARTING) { + rt->stream_wait_cond = true; + wake_up(&rt->stream_wait_queue); + } + + /* now send our playback data (if a free out urb was found) */ + sub = &rt->playback; + spin_lock_irqsave(&sub->lock, flags); + if (sub->active) { + int ret; + + ret = hiface_pcm_playback(sub, out_urb); + if (ret < 0) { + spin_unlock_irqrestore(&sub->lock, flags); + goto out_fail; + } + if (sub->period_off >= sub->instance->runtime->period_size) { + sub->period_off %= sub->instance->runtime->period_size; + spin_unlock_irqrestore(&sub->lock, flags); + snd_pcm_period_elapsed(sub->instance); + } else { + spin_unlock_irqrestore(&sub->lock, flags); + } + } else { + memset(out_urb->buffer, 0, PCM_MAX_PACKET_SIZE); + spin_unlock_irqrestore(&sub->lock, flags); + } +out_fail: + usb_submit_urb(&out_urb->instance, GFP_ATOMIC); +} + +static int hiface_pcm_open(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct pcm_substream *sub = NULL; + struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime; + int ret; + + pr_debug("%s: called.\n", __func__); + + if (rt->panic) + return -EPIPE; + + mutex_lock(&rt->stream_mutex); + alsa_rt->hw = pcm_hw; + + if (alsa_sub->stream == SNDRV_PCM_STREAM_PLAYBACK) { + + /* XXX can we avoid setting hw.rates below? + * + * FWIU setting alsa_rt->hw.rates in the open callback can be + * useful in two cases: + * + * - different hardware revisions have different + * capabilities + * + * - different stream types must have the same capabilities + * + * but in our case it should not be needed as we only have one + * playback stream and we define the capabilities via + * constraints already to avoid invalid rates to be used. + * + * Moreover, following the code stolen from 6fire it seems + * impossible to get to setting alsa_rt->hw.rates here: + * + * hiface_pcm_init: + * rt->rate = ARRAY_SIZE(rates); + * + * hiface_pcm_open: + * if (rt->rate < ARRAY_SIZE(rates)) + * alsa_rt->hw.rates = rates_alsaid[rt->rate]; + * // So it does not get here on the first open + * + * hiface_pcm_prepare: + * hiface_pcm_set_rate: + * for (rt->rate = 0; rt->rate < ARRAY_SIZE(rates); rt->rate++) + * if (rate == rates[rt->rate]) + * break; + * + * hiface_pcm_close: + * rt->rate = ARRAY_SIZE(rates); + * // So it won't set alsa_rt->hw.rates at the next open either + * + * So the only way to set alsa_rt->hw.rates is to have two + * calls to the open callback, is that even possible? ALSA + * does not allow sharing PCM streams AFAIK and we use only + * one playback stream. + * + * Maybe the 6fire driver was setting alsa_rt->hw.rates in + * order to have the playback stream and the capture stream + * use the same rate? I.e. the first open,prepare,set_rate() + * sequence on one type of stream will decide the rate and the + * second open on the other type would restrict the supported + * rate to the one already in use, but I am not sure. + * + * If the rationale makes sense then we don't need to set + * alsa_rt->hw.rates and we can remove this and related code. + */ + if (rt->rate < ARRAY_SIZE(rates)) + alsa_rt->hw.rates = rates_alsaid[rt->rate]; + + sub = &rt->playback; + } + + if (!sub) { + mutex_unlock(&rt->stream_mutex); + pr_err("Invalid stream type\n"); + return -EINVAL; + } + + if (rt->extra_freq) { + alsa_rt->hw.rate_max = 384000; + constraints_rates.count = ARRAY_SIZE(rates); + } + + ret = snd_pcm_hw_constraint_list(alsa_sub->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &constraints_rates); + if (ret < 0) { + mutex_unlock(&rt->stream_mutex); + return ret; + } + + sub->instance = alsa_sub; + sub->active = false; + mutex_unlock(&rt->stream_mutex); + return 0; +} + +static int hiface_pcm_close(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub); + unsigned long flags; + + if (rt->panic) + return 0; + + pr_debug("%s: called.\n", __func__); + + mutex_lock(&rt->stream_mutex); + if (sub) { + /* deactivate substream */ + spin_lock_irqsave(&sub->lock, flags); + sub->instance = NULL; + sub->active = false; + spin_unlock_irqrestore(&sub->lock, flags); + + /* all substreams closed? if so, stop streaming */ + if (!rt->playback.instance) { + hiface_pcm_stream_stop(rt); + rt->rate = ARRAY_SIZE(rates); + } + } + mutex_unlock(&rt->stream_mutex); + return 0; +} + +static int hiface_pcm_hw_params(struct snd_pcm_substream *alsa_sub, + struct snd_pcm_hw_params *hw_params) +{ + pr_debug("%s: called.\n", __func__); + return snd_pcm_lib_malloc_pages(alsa_sub, + params_buffer_bytes(hw_params)); +} + +static int hiface_pcm_hw_free(struct snd_pcm_substream *alsa_sub) +{ + pr_debug("%s: called.\n", __func__); + return snd_pcm_lib_free_pages(alsa_sub); +} + +static int hiface_pcm_prepare(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub); + struct snd_pcm_runtime *alsa_rt = alsa_sub->runtime; + int ret; + + pr_debug("%s: called.\n", __func__); + + if (rt->panic) + return -EPIPE; + if (!sub) + return -ENODEV; + + mutex_lock(&rt->stream_mutex); + + sub->dma_off = 0; + sub->period_off = 0; + + if (rt->stream_state == STREAM_DISABLED) { + + ret = hiface_pcm_set_rate(rt, alsa_rt->rate); + if (ret) { + mutex_unlock(&rt->stream_mutex); + return ret; + } + ret = hiface_pcm_stream_start(rt); + if (ret) { + mutex_unlock(&rt->stream_mutex); + return ret; + } + } + mutex_unlock(&rt->stream_mutex); + return 0; +} + +static int hiface_pcm_trigger(struct snd_pcm_substream *alsa_sub, int cmd) +{ + struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub); + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + unsigned long flags; + + pr_debug("%s: called.\n", __func__); + + if (rt->panic) + return -EPIPE; + if (!sub) + return -ENODEV; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + spin_lock_irqsave(&sub->lock, flags); + sub->active = true; + spin_unlock_irqrestore(&sub->lock, flags); + return 0; + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + spin_lock_irqsave(&sub->lock, flags); + sub->active = false; + spin_unlock_irqrestore(&sub->lock, flags); + return 0; + + default: + return -EINVAL; + } +} + +static snd_pcm_uframes_t hiface_pcm_pointer(struct snd_pcm_substream *alsa_sub) +{ + struct pcm_substream *sub = hiface_pcm_get_substream(alsa_sub); + struct pcm_runtime *rt = snd_pcm_substream_chip(alsa_sub); + unsigned long flags; + snd_pcm_uframes_t dma_offset; + + if (rt->panic || !sub) + return SNDRV_PCM_STATE_XRUN; + + spin_lock_irqsave(&sub->lock, flags); + dma_offset = sub->dma_off; + spin_unlock_irqrestore(&sub->lock, flags); + return bytes_to_frames(alsa_sub->runtime, dma_offset); +} + +static struct snd_pcm_ops pcm_ops = { + .open = hiface_pcm_open, + .close = hiface_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = hiface_pcm_hw_params, + .hw_free = hiface_pcm_hw_free, + .prepare = hiface_pcm_prepare, + .trigger = hiface_pcm_trigger, + .pointer = hiface_pcm_pointer, +}; + +static int hiface_pcm_init_urb(struct pcm_urb *urb, + struct hiface_chip *chip, + unsigned int ep, + void (*handler)(struct urb *)) +{ + urb->chip = chip; + usb_init_urb(&urb->instance); + + urb->buffer = kzalloc(PCM_MAX_PACKET_SIZE, GFP_KERNEL); + if (!urb->buffer) + return -ENOMEM; + + usb_fill_bulk_urb(&urb->instance, chip->dev, + usb_sndbulkpipe(chip->dev, ep), (void *)urb->buffer, + PCM_MAX_PACKET_SIZE, handler, urb); + init_usb_anchor(&urb->submitted); + + return 0; +} + +void hiface_pcm_abort(struct hiface_chip *chip) +{ + struct pcm_runtime *rt = chip->pcm; + + if (rt) { + rt->panic = true; + + if (rt->playback.instance) { + snd_pcm_stop(rt->playback.instance, + SNDRV_PCM_STATE_XRUN); + } + mutex_lock(&rt->stream_mutex); + hiface_pcm_stream_stop(rt); + mutex_unlock(&rt->stream_mutex); + } +} + +static void hiface_pcm_destroy(struct hiface_chip *chip) +{ + struct pcm_runtime *rt = chip->pcm; + int i; + + for (i = 0; i < PCM_N_URBS; i++) + kfree(rt->out_urbs[i].buffer); + + kfree(chip->pcm); + chip->pcm = NULL; +} + +static void hiface_pcm_free(struct snd_pcm *pcm) +{ + struct pcm_runtime *rt = pcm->private_data; + + pr_debug("%s: called.\n", __func__); + + if (rt) + hiface_pcm_destroy(rt->chip); +} + +int hiface_pcm_init(struct hiface_chip *chip, u8 extra_freq) +{ + int i; + int ret; + struct snd_pcm *pcm; + struct pcm_runtime *rt; + + rt = kzalloc(sizeof(*rt), GFP_KERNEL); + if (!rt) + return -ENOMEM; + + rt->chip = chip; + rt->stream_state = STREAM_DISABLED; + rt->rate = ARRAY_SIZE(rates); + if (extra_freq) + rt->extra_freq = 1; + + init_waitqueue_head(&rt->stream_wait_queue); + mutex_init(&rt->stream_mutex); + spin_lock_init(&rt->playback.lock); + + for (i = 0; i < PCM_N_URBS; i++) + hiface_pcm_init_urb(&rt->out_urbs[i], chip, OUT_EP, + hiface_pcm_out_urb_handler); + + ret = snd_pcm_new(chip->card, "USB-SPDIF Audio", 0, 1, 0, &pcm); + if (ret < 0) { + kfree(rt); + pr_err("Cannot create pcm instance\n"); + return ret; + } + + pcm->private_data = rt; + pcm->private_free = hiface_pcm_free; + + strcpy(pcm->name, "USB-SPDIF Audio"); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &pcm_ops); + + snd_pcm_lib_preallocate_pages_for_all(pcm, + SNDRV_DMA_TYPE_CONTINUOUS, + snd_dma_continuous_data(GFP_KERNEL), + MAX_BUFSIZE, MAX_BUFSIZE); + rt->instance = pcm; + + chip->pcm = rt; + return 0; +} diff --git a/sound/usb/hiface/pcm.h b/sound/usb/hiface/pcm.h new file mode 100644 index 0000000..ddc9fe7 --- /dev/null +++ b/sound/usb/hiface/pcm.h @@ -0,0 +1,24 @@ +/* + * Linux driver for M2Tech HiFace compatible devices + * + * Copyright 2012-2013 (C) M2TECH S.r.l and Amarula Solutions B.V. + * + * Authors: Michael Trimarchi michael@amarulasolutions.com + * Antonio Ospite ao2@amarulasolutions.com + * + * The driver is based on the work done in TerraTec DMX 6Fire USB + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef HIFACE_PCM_H +#define HIFACE_PCM_H + +struct hiface_chip; + +int hiface_pcm_init(struct hiface_chip *chip, u8 extra_freq); +void hiface_pcm_abort(struct hiface_chip *chip); +#endif /* HIFACE_PCM_H */