Re: [alsa-devel] [PATCH 1/2] ASoC: codecs: ad193x: Group register initialization at probe

On Thu, Jun 27, 2019 at 8:05 PM Codrin Ciubotariu codrin.ciubotariu@microchip.com wrote:

+struct ad193x_reg_default {

•   unsigned int reg;
  

•   unsigned int val;
  

+};

You probably don't need to define this. There is a struct reg_sequence in regmap.h.

+/* codec register values to set after reset */ +static void ad193x_reg_default_init(struct ad193x_priv *ad193x) +{

•   const struct ad193x_reg_default reg_init[] = {
  

•           {  0, 0x99 },   /* PLL_CLK_CTRL0: pll input: mclki/xi 12.288Mhz */
  

•           {  1, 0x04 },   /* PLL_CLK_CTRL1: no on-chip Vref */
  

•           {  2, 0x40 },   /* DAC_CTRL0: TDM mode */
  

•           {  4, 0x1A },   /* DAC_CTRL2: 48kHz de-emphasis, unmute dac */
  

•           {  5, 0x00 },   /* DAC_CHNL_MUTE: unmute DAC channels */
  

•   };
  

•   const struct ad193x_reg_default reg_adc_init[] = {
  

•           { 14, 0x03 },   /* ADC_CTRL0: high-pass filter enable */
  

•           { 15, 0x43 },   /* ADC_CTRL1: sata delay=1, adc aux mode */
  

•   };
  

•   int i;
  

•   for (i = 0; i < ARRAY_SIZE(reg_init); i++)
  

•           regmap_write(ad193x->regmap, reg_init[i].reg, reg_init[i].val);
  

•   if (ad193x_has_adc(ad193x)) {
  

•           for (i = 0; i < ARRAY_SIZE(reg_adc_init); i++) {
  

•                   regmap_write(ad193x->regmap, reg_adc_init[i].reg,
  

•                                reg_adc_init[i].val);
  

•           }
  

•   }
  

And you could use regmap_multi_reg_write( ) to substitute the two for-loops.

See https://mailman.alsa-project.org/pipermail/alsa-devel/2019-June/151090.html as an example. It also has some reg initializations in component probe( ).