From: Arnd Bergmann arnd@arndb.de
The driver has always had a FIXME about this, and it seems like this trivial code move avoids a mach header inclusion, so just do it.
With that out of the way, and the header file inclusions changed to global files, the driver can also be compile-tested on other platforms.
Acked-by: Mark Brown broonie@kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de --- arch/arm/mach-omap1/board-perseus2.c | 6 ++++++ drivers/spi/Kconfig | 2 +- drivers/spi/spi-omap-uwire.c | 15 +++------------ 3 files changed, 10 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 1aeeb7337d29..da0155107d85 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -289,6 +289,12 @@ static void __init omap_perseus2_init(void) omap_cfg_reg(F4_7XX_KBC3); omap_cfg_reg(E3_7XX_KBC4);
+ if (IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)) { + /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ + int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; + omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); + } + platform_add_devices(devices, ARRAY_SIZE(devices));
omap_serial_init(); diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index d2815eb361c0..6c28ca232444 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -631,7 +631,7 @@ config SPI_OCTEON
config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" - depends on ARCH_OMAP1 + depends on ARCH_OMAP1 || (ARM && COMPILE_TEST) select SPI_BITBANG help This hooks up to the MicroWire controller on OMAP1 chips. diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 087172a193fa..29198e6815b2 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -44,13 +44,10 @@ #include <linux/module.h> #include <linux/io.h>
-#include <mach/hardware.h> #include <asm/mach-types.h> - -#include <mach/mux.h> - -#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */ - +#include <linux/soc/ti/omap1-io.h> +#include <linux/soc/ti/omap1-soc.h> +#include <linux/soc/ti/omap1-mux.h>
/* FIXME address is now a platform device resource, * and irqs should show there too... @@ -548,12 +545,6 @@ static int __init omap_uwire_init(void) omap_cfg_reg(N14_1610_UWIRE_CS0); omap_cfg_reg(N15_1610_UWIRE_CS1); } - if (machine_is_omap_perseus2()) { - /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ - int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; - omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); - } - return platform_driver_register(&uwire_driver); }