On Mon, 11 Oct 2010, Valentine Sinitsyn valentine.sinitsyn@gmail.com writes:
- Reload soundcard driver with no model specified (i.e. delete "model=basic"
from modprobe.conf and reboot or do rmmod snd-hda-intel/modprobe snd-hda-intel model=auto). This will reset all mixers, so you'll need to enable Capture again in order for mic to work. 2. If headphones work, you are done.
Despite I tried this setting at least 4 times, this time it worked in the first try. Maybe I should quit PhD while I am the start of it.
- If not, run HDA Analyzer, find "PIN 0x21" in the left sidebar. Look at
"Output Amplifier" checkbox group and clear mute checkboxes. Then, switch to "AUD_MIX (0x0C)" in the same sidebar and adjust output volume (the same checkbox group). You should hear sound in your headphones. 4. If not, look at PIN 0x1a and do the same as at step 3. 5. If this doesn't help, file a bug report.
Thanks so much Raymond and Valentine for your helpful support. I am in dept to you.
Regards.