The patch
ASoC: sunxi: add sun4i SPDIF transceiver
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 8020e1bbaa5e8d8340ab78c71a69ccdd362ab203 Mon Sep 17 00:00:00 2001
From: Marcus Cooper codekipper@gmail.com Date: Mon, 8 Feb 2016 18:09:20 +0100 Subject: [PATCH] ASoC: sunxi: add sun4i SPDIF transceiver
Add devicetree bindings for the SPDIF transceiver found on found on Allwinners A10 and A20 SoCs.
Signed-off-by: Marcus Cooper codekipper@gmail.com Acked-by: Maxime Ripard maxime.ripard@free-electrons.com Signed-off-by: Mark Brown broonie@kernel.org --- .../bindings/sound/sunxi,sun4i-spdif.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt new file mode 100644 index 0000000..13503aa --- /dev/null +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -0,0 +1,39 @@ +Allwinner Sony/Philips Digital Interface Format (S/PDIF) Controller + +The Allwinner S/PDIF audio block is a transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. +For now only playback is supported. + +Required properties: + + - compatible : should be one of the following: + - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks : Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + "apb" clock for the spdif bus. + "spdif" clock for spdif controller. + +Example: + +spdif: spdif@01c21000 { + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x40>; + interrupts = <13>; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma 0 2>, <&dma 0 2>; + dma-names = "rx", "tx"; + status = "okay"; +};