On Sat, Jul 29, 2017 at 10:17 PM, codekipper@gmail.com wrote:
From: Marcus Cooper codekipper@gmail.com
On the original i2s block the channel mapping and selection were configured for stereo audio by default: This is not the case with the newer SoCs and they are also located at different offsets.
To support the newer SoC then regmap fields have been added to the quirks and these are initialised to their correct settings during probing.
Signed-off-by: Marcus Cooper codekipper@gmail.com
sound/soc/sunxi/sun4i-i2s.c | 80 ++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 72 insertions(+), 8 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c index 2a25df22c2f8..120f797a38e8 100644 --- a/sound/soc/sunxi/sun4i-i2s.c +++ b/sound/soc/sunxi/sun4i-i2s.c @@ -82,7 +82,7 @@ #define SUN4I_I2S_TX_CNT_REG 0x2c
#define SUN4I_I2S_TX_CHAN_SEL_REG 0x30 -#define SUN4I_I2S_TX_CHAN_SEL(num_chan) (((num_chan) - 1) << 0) +#define SUN4I_I2S_CHAN_SEL(num_chan) (((num_chan) - 1) << 0)
#define SUN4I_I2S_TX_CHAN_MAP_REG 0x34 #define SUN4I_I2S_TX_CHAN_MAP(chan, sample) ((sample) << (chan << 2)) @@ -98,6 +98,10 @@
- @sun4i_i2s_regmap: regmap config to use.
- @mclk_offset: Value by which mclkdiv needs to be adjusted.
- @bclk_offset: Value by which bclkdiv needs to be adjusted.
- @field_txchanmap: location of the tx channel mapping register.
- @field_rxchanmap: location of the rx channel mapping register.
- @field_txchansel: location of the tx channel select bit fields.
*/
- @field_rxchansel: location of the rx channel select bit fields.
struct sun4i_i2s_quirks { bool has_reset; @@ -105,6 +109,12 @@ struct sun4i_i2s_quirks { const struct regmap_config *sun4i_i2s_regmap; unsigned int mclk_offset; unsigned int bclk_offset;
/* Register fields for i2s */struct reg_field field_txchanmap;struct reg_field field_rxchanmap;struct reg_field field_txchansel;struct reg_field field_rxchansel;};
struct sun4i_i2s { @@ -118,6 +128,12 @@ struct sun4i_i2s { struct snd_dmaengine_dai_dma_data capture_dma_data; struct snd_dmaengine_dai_dma_data playback_dma_data;
/* Register fields for i2s */struct regmap_field *field_txchanmap;struct regmap_field *field_rxchanmap;struct regmap_field *field_txchansel;struct regmap_field *field_rxchansel;const struct sun4i_i2s_quirks *variant;};
@@ -264,6 +280,18 @@ static int sun4i_i2s_hw_params(struct snd_pcm_substream *substream, if (params_channels(params) != 2) return -EINVAL;
/* Map the channels for playback and capture */regmap_field_write(i2s->field_txchanmap, 0x76543210);regmap_field_write(i2s->field_rxchanmap, 0x00003210);/* Configure the channels */regmap_field_write(i2s->field_txchansel,SUN4I_I2S_CHAN_SEL(params_channels(params)));regmap_field_write(i2s->field_rxchansel,SUN4I_I2S_CHAN_SEL(params_channels(params)));
Checkpatch says don't use multiple blank lines.
switch (params_physical_width(params)) { case 16: width = DMA_SLAVE_BUSWIDTH_2_BYTES;@@ -486,13 +514,6 @@ static int sun4i_i2s_startup(struct snd_pcm_substream *substream, SUN4I_I2S_CTRL_SDO_EN_MASK, SUN4I_I2S_CTRL_SDO_EN(0));
/* Enable the first two channels */regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_SEL_REG,SUN4I_I2S_TX_CHAN_SEL(2));/* Map them to the two first samples coming in */regmap_write(i2s->regmap, SUN4I_I2S_TX_CHAN_MAP_REG,SUN4I_I2S_TX_CHAN_MAP(0, 0) | SUN4I_I2S_TX_CHAN_MAP(1, 1)); return clk_prepare_enable(i2s->mod_clk);} @@ -677,14 +698,51 @@ static const struct sun4i_i2s_quirks sun4i_a10_i2s_quirks = { .has_reset = false, .reg_offset_txdata = SUN4I_I2S_FIFO_TX_REG, .sun4i_i2s_regmap = &sun4i_i2s_regmap_config,
.field_txchanmap = REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),.field_rxchanmap = REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),.field_txchansel = REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),.field_rxchansel = REG_FIELD(SUN4I_I2S_RX_CHAN_SEL_REG, 0, 2),};
static const struct sun4i_i2s_quirks sun6i_a31_i2s_quirks = { .has_reset = true, .reg_offset_txdata = SUN4I_I2S_FIFO_TX_REG, .sun4i_i2s_regmap = &sun4i_i2s_regmap_config,
.field_txchanmap = REG_FIELD(SUN4I_I2S_TX_CHAN_MAP_REG, 0, 31),.field_rxchanmap = REG_FIELD(SUN4I_I2S_RX_CHAN_MAP_REG, 0, 31),.field_txchansel = REG_FIELD(SUN4I_I2S_TX_CHAN_SEL_REG, 0, 2),.field_rxchansel = REG_FIELD(SUN4I_I2S_RX_CHAN_SEL_REG, 0, 2),};
+static int sun4i_i2s_init_regmap_fields(struct device *dev, struct sun4i_i2s *i2s)
This line is over 80 characters. Please wrap the line.
+{
i2s->field_txchanmap =devm_regmap_field_alloc(dev, i2s->regmap,i2s->variant->field_txchanmap);if (IS_ERR(i2s->field_txchanmap))return PTR_ERR(i2s->field_txchanmap);i2s->field_rxchanmap =devm_regmap_field_alloc(dev, i2s->regmap,i2s->variant->field_rxchanmap);if (IS_ERR(i2s->field_rxchanmap))return PTR_ERR(i2s->field_rxchanmap);i2s->field_txchansel =devm_regmap_field_alloc(dev, i2s->regmap,i2s->variant->field_txchansel);if (IS_ERR(i2s->field_txchansel))return PTR_ERR(i2s->field_txchansel);i2s->field_rxchansel =devm_regmap_field_alloc(dev, i2s->regmap,i2s->variant->field_rxchansel);if (IS_ERR(i2s->field_rxchansel))return PTR_ERR(i2s->field_rxchansel);return 0;
This seems to be the last "if (IS_ERR()) return PTR_ERR()" sequence. So it looks like you could apply the PTR_ERR_OR_ZERO hunk from the kbuild test robot. I wasn't aware of this preference before, and to be honest I'm fine either way.
Otherwise,
Reviewed-by: Chen-Yu Tsai wens@csie.org
+}
static int sun4i_i2s_probe(struct platform_device *pdev) { struct sun4i_i2s *i2s; @@ -778,6 +836,12 @@ static int sun4i_i2s_probe(struct platform_device *pdev) goto err_suspend; }
ret = sun4i_i2s_init_regmap_fields(&pdev->dev, i2s);if (ret) {dev_err(&pdev->dev, "Could not initialise regmap fields\n");goto err_suspend;}return 0;err_suspend:
2.13.3
-- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/d/optout.