Hi,
I'm reverse engineering and implementing support for the RME Digiface USB, which is an ADAT interface with a non-class-compliant interface (probably similar to other RME interfaces like the MADIface, but I don't have any others to test). The basic audio streaming works fine with an entry in quirks-table.h and a format quirk to set the system sample rate in quirks.c. Now I need to figure out how to implement the mixer controls.
Currently I have the snd-usb-audio driver claiming only interface #0 (streaming) and I use a Python script to control the mixer/settings directly with libusb (control transfers and interface #1). This works fine and there's some prior art for this in the firewire world (for example, snd-dice doesn't do any mixer control stuff and you have to use ffado-mixer to control everything from userspace) but I assume it's not really the best way to go?
The problem is that the device has a 66x34 matrix mixer, with up to 2048 cross points enabled at once. Exposing each cross point as an ALSA mixer control (similar to how mixer_scarlett2.c does it) would mean 2244 controls just for the mixer... which seems like a bit too much.
On top of that there is also VU meter feedback for all the inputs/outputs, as well as general fader controls for each output and global output configs and status. I'm not sure about the VU meters, but everything else sounds like it would map fine to normal mixer controls.
Is there some recommended way to expose this kind of matrix mixer interface to userspace? I think for something like this you pretty much have to rely on device-specific tools to make the UX manageable, so maybe hwdep... but at least exposing everything as an ALSA control would have the advantage of supporting save/restore with something like alsactl. So I don't really know what's the way to go here.
System settings/general status/output faders go via control transfers, while interface #1 has an interrupt IN endpoint (streaming state feedback, not very useful) and two bulk endpoints (matrix mixer control out, VU meter data in). There's another pair of bulk endpoints in interface #2 which I'm guessing are for firmware updates (I haven't looked at that part). So in principle it's not crazy to expose all the system controls/output faders as mixer controls in ALSA and leave interface #1 entirely unclaimed so a userspace program can directly configure the matrix mixer and access VU meter levels. There is a global mixer enable bit (controlled via ctl transfer), so if that is exposed as an ALSA control and disabled by default the interface will operate as a 1:1 in/out interface without needing any custom userspace to configure the mixer.
There's one other quirky thing: it also needs a way to set the sample rate as a mixer control, because you need to be able to configure the rate even when the PCM device is not open (since that affects stand-alone mixer operation). I imagine the right logic here would be to have a selector control for the system sample rate, and automatically change it and lock it when the PCM is opened with a given rate?
Any thoughts welcome ^^
~~ Lina