This patch adds support for set bclk ratio from machine driver.
Signed-off-by: Sugar Zhang sugar.zhang@rock-chips.com ---
sound/soc/rockchip/rockchip_i2s.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c index c7dc350..c9d5c52 100644 --- a/sound/soc/rockchip/rockchip_i2s.c +++ b/sound/soc/rockchip/rockchip_i2s.c @@ -49,6 +49,7 @@ struct rk_i2s_dev { bool rx_start; bool is_master_mode; const struct rk_i2s_pins *pins; + unsigned int bclk_ratio; };
static int i2s_runtime_suspend(struct device *dev) @@ -278,7 +279,7 @@ static int rockchip_i2s_hw_params(struct snd_pcm_substream *substream,
if (i2s->is_master_mode) { mclk_rate = clk_get_rate(i2s->mclk); - bclk_rate = 2 * 32 * params_rate(params); + bclk_rate = i2s->bclk_ratio * params_rate(params); if (bclk_rate == 0 || mclk_rate % bclk_rate) return -EINVAL;
@@ -413,6 +414,16 @@ static int rockchip_i2s_trigger(struct snd_pcm_substream *substream, return ret; }
+static int rockchip_i2s_set_bclk_ratio(struct snd_soc_dai *dai, + unsigned int ratio) +{ + struct rk_i2s_dev *i2s = to_info(dai); + + i2s->bclk_ratio = ratio; + + return 0; +} + static int rockchip_i2s_set_sysclk(struct snd_soc_dai *cpu_dai, int clk_id, unsigned int freq, int dir) { @@ -441,6 +452,7 @@ static int rockchip_i2s_dai_probe(struct snd_soc_dai *dai)
static const struct snd_soc_dai_ops rockchip_i2s_dai_ops = { .hw_params = rockchip_i2s_hw_params, + .set_bclk_ratio = rockchip_i2s_set_bclk_ratio, .set_sysclk = rockchip_i2s_set_sysclk, .set_fmt = rockchip_i2s_set_fmt, .trigger = rockchip_i2s_trigger, @@ -638,6 +650,8 @@ static int rockchip_i2s_probe(struct platform_device *pdev) i2s->capture_dma_data.addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; i2s->capture_dma_data.maxburst = 4;
+ i2s->bclk_ratio = 64; + dev_set_drvdata(&pdev->dev, i2s);
pm_runtime_enable(&pdev->dev);