use FIELD_{GET|PREP} in qcom driver to get/set field values instead of open coding masks and shift operations. Also, remove now unused register shift defines
Signed-off-by: Vinod Koul vkoul@kernel.org --- drivers/soundwire/qcom.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-)
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 915c2cf0c274..dafa3f3dd1ab 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -43,13 +43,10 @@ #define SWRM_CMD_FIFO_RD_FIFO_ADDR 0x318 #define SWRM_ENUMERATOR_CFG_ADDR 0x500 #define SWRM_MCP_FRAME_CTRL_BANK_ADDR(m) (0x101C + 0x40 * (m)) -#define SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_SHFT 3 #define SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK GENMASK(2, 0) #define SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK GENMASK(7, 3) -#define SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_SHFT 0 #define SWRM_MCP_CFG_ADDR 0x1048 #define SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK GENMASK(21, 17) -#define SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_SHFT 0x11 #define SWRM_DEF_CMD_NO_PINGS 0x1f #define SWRM_MCP_STATUS 0x104C #define SWRM_MCP_STATUS_BANK_NUM_MASK BIT(0) @@ -284,8 +281,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) u32 val;
/* Clear Rows and Cols */ - val = (SWRM_MAX_ROW_VAL << SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_SHFT | - SWRM_MIN_COL_VAL << SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_SHFT); + val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, SWRM_MAX_ROW_VAL); + val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, SWRM_MIN_COL_VAL);
ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val);
@@ -298,9 +295,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
/* Configure No pings */ ctrl->reg_read(ctrl, SWRM_MCP_CFG_ADDR, &val); - val &= ~SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK; - val |= (SWRM_DEF_CMD_NO_PINGS << - SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_SHFT); + val |= FIELD_PREP(SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK, SWRM_DEF_CMD_NO_PINGS); ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val);
/* Configure number of retries of a read/write cmd */ @@ -355,11 +350,8 @@ static int qcom_swrm_pre_bank_switch(struct sdw_bus *bus)
ctrl->reg_read(ctrl, reg, &val);
- val &= ~SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK; - val &= ~SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK; - - val |= (SWRM_MAX_ROW_VAL << SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_SHFT | - SWRM_MAX_COL_VAL << SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_SHFT); + val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, SWRM_MAX_COL_VAL); + val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, SWRM_MAX_ROW_VAL);
return ctrl->reg_write(ctrl, reg, val); } @@ -693,8 +685,8 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl)
ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val);
- ctrl->num_dout_ports = val & SWRM_COMP_PARAMS_DOUT_PORTS_MASK; - ctrl->num_din_ports = (val & SWRM_COMP_PARAMS_DIN_PORTS_MASK) >> 5; + ctrl->num_dout_ports = FIELD_GET(SWRM_COMP_PARAMS_DOUT_PORTS_MASK, val); + ctrl->num_din_ports = FIELD_GET(SWRM_COMP_PARAMS_DIN_PORTS_MASK, val);
ret = of_property_read_u32(np, "qcom,din-ports", &val); if (ret)