Adds dt-binding for a Generic MIDI Interface using a serial device.
Signed-off-by: Daniel Kaehn kaehndan@gmail.com --- .../devicetree/bindings/sound/serialmidi.yaml | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/serialmidi.yaml
diff --git a/Documentation/devicetree/bindings/sound/serialmidi.yaml b/Documentation/devicetree/bindings/sound/serialmidi.yaml new file mode 100644 index 000000000000..06a894e1b91d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/serialmidi.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/serialmidi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic Serial MIDI Interface + +maintainers: + - Daniel Kaehn kaehndan@gmail.com + +description: + Generic MIDI interface using a serial device. This denotes that a serial device is + dedicated to MIDI communication, either to an external MIDI device through a DIN5 + or other connector, or to a known hardwired MIDI controller. This device must be a + child node of a serial node. + + Can only be set to use standard baud rates corresponding to supported rates of the + parent serial device. If the standard MIDI baud of 31.25 kBaud is needed + (as would be the case if interfacing with arbitrary external MIDI devices), + configure the clocks of the parent serial device so that a requested baud of 38.4 kBaud + resuts in the standard MIDI baud rate, and set the 'current-speed' property to 38400. + +properties: + compatible: + const: serialmidi + + current-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Baudrate to set the serial port to when this MIDI device is opened. + If not specified, the parent serial device is allowed to use its default baud. + +required: + - compatible + +additionalProperties: false + +examples: + - | + serial { + midi { + compatible = "serialmidi"; + current-speed = <38400>; + }; + };