From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
The existing code reports a NAK only when ACK=0 This is not aligned with the SoundWire 1.x specifications.
Table 32 in the SoundWire 1.2 specification shows that a Device shall not set NAK=1 if ACK=1. But Table 33 shows the Combined Response may very well be NAK=1/ACK=1, e.g. if another Device than the one addressed reports a parity error.
NAK=1 signals a 'Command_Aborted', regardless of the ACK bit value.
Move the tests for NAK so that the NAK=1/ACK=1 combination is properly detected according to the specification.
Fixes: 956baa1992f9a ('soundwire: cdns: Add sdw_master_ops and IO transfer support') Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Bard Liao yung-chuan.liao@linux.intel.com --- drivers/soundwire/cadence_master.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 801e1fef59d8..d3c9cf920cbd 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -484,10 +484,10 @@ cdns_fill_msg_resp(struct sdw_cdns *cdns, if (!(cdns->response_buf[i] & CDNS_MCP_RESP_ACK)) { no_ack = 1; dev_dbg_ratelimited(cdns->dev, "Msg Ack not received\n"); - if (cdns->response_buf[i] & CDNS_MCP_RESP_NACK) { - nack = 1; - dev_err_ratelimited(cdns->dev, "Msg NACK received\n"); - } + } + if (cdns->response_buf[i] & CDNS_MCP_RESP_NACK) { + nack = 1; + dev_err_ratelimited(cdns->dev, "Msg NACK received\n"); } }