Seungwhan Youn wrote:
Hi,
On Tue, Jul 20, 2010 at 2:28 PM, Chanwoo Choi cw00.choi@samsung.com wrote:
This patch add sound support for the Aquila board based on S5PC110.
The Aquila board is based on Samsung SoC(S5PC110) and include WM8994 codec over I2S to support sound. This uses the I2Sv4 driver compatible with I2Sv5 to run sound.
The kind of jack is below states :
- SND_JACK_HEADPHONE
- SND_JACK_HEADSET
- SND_JACK_MECHANICAL
: When TV-OUT cable is inserted on Aquila board, the TV-OUT cable isn't connected to television.
- SND_JACK_AVOUT
: When TV-OUT cable is inserted on Aquila board, the TV-OUT cable is connected to television.
Signed-off-by: Chanwoo Choi cw00.choi@samsung.com Signed-off-by: Joonyoung Shim jy0922.shim@samsung.com Signed-off-by: Kyungmin Park kyungmin.park@samsung.com
sound/soc/s3c24xx/Kconfig | 9 + sound/soc/s3c24xx/Makefile | 2 + sound/soc/s3c24xx/aquila_wm8994.c | 300 +++++++++++++++++++++++++++++++++++++ 3 files changed, 311 insertions(+), 0 deletions(-) create mode 100644 sound/soc/s3c24xx/aquila_wm8994.c
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig index 213963a..c09b402 100644 --- a/sound/soc/s3c24xx/Kconfig +++ b/sound/soc/s3c24xx/Kconfig @@ -131,3 +131,12 @@ config SND_S3C64XX_SOC_SMARTQ depends on SND_S3C24XX_SOC && MACH_SMARTQ select SND_S3C64XX_SOC_I2S select SND_SOC_WM8750
+config SND_S5PC110_SOC_AQUILA_WM8994
tristate "SoC I2S Audio support for AQUILA - WM8994"depends on SND_S3C24XX_SOC && MACH_AQUILAselect SND_S3C64XX_SOC_I2S_V4select SND_SOC_WM8994helpSay Y if you want to add support for SoC audio on aquilawith the WM8994.diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile index 50172c3..02dd12c 100644 --- a/sound/soc/s3c24xx/Makefile +++ b/sound/soc/s3c24xx/Makefile @@ -30,6 +30,7 @@ snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o snd-soc-smdk64xx-wm8580-objs := smdk64xx_wm8580.o snd-soc-smdk-wm9713-objs := smdk_wm9713.o snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o +snd-soc-aquila-wm8994-objs := aquila_wm8994.o
obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o @@ -43,3 +44,4 @@ obj-$(CONFIG_SND_S3C24XX_SOC_SIMTEC_TLV320AIC23) += snd-soc-s3c24xx-simtec-tlv32 obj-$(CONFIG_SND_S3C64XX_SOC_WM8580) += snd-soc-smdk64xx-wm8580.o obj-$(CONFIG_SND_SOC_SMDK_WM9713) += snd-soc-smdk-wm9713.o obj-$(CONFIG_SND_S3C64XX_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o +obj-$(CONFIG_SND_S5PC110_SOC_AQUILA_WM8994) += snd-soc-aquila-wm8994.o diff --git a/sound/soc/s3c24xx/aquila_wm8994.c b/sound/soc/s3c24xx/aquila_wm8994.c new file mode 100644 index 0000000..6ff5068 --- /dev/null +++ b/sound/soc/s3c24xx/aquila_wm8994.c @@ -0,0 +1,300 @@ +/*
- aquila_wm8994.c
- Copyright (C) 2010 Samsung Electronics Co.Ltd
- Author: Chanwoo Choi cw00.choi@samsung.com
- This program is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by the
- Free Software Foundation; either version 2 of the License, or (at your
- option) any later version.
- */
+#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/jack.h> +#include <asm/mach-types.h> +#include <mach/gpio.h> +#include <mach/regs-clock.h>
+#include <linux/mfd/wm8994/core.h> +#include <linux/mfd/wm8994/registers.h> +#include "../codecs/wm8994.h" +#include "s3c-dma.h" +#include "s3c64xx-i2s.h"
+#define WM8994_DAI_HIFI 0 +#define WM8994_DAI_VOICE 1
+static struct snd_soc_card aquila; +static struct platform_device *aquila_snd_device;
+/* 3.5 pie jack */ +static struct snd_soc_jack jack;
+/* 3.5 pie jack detection DAPM pins */ +static struct snd_soc_jack_pin jack_pins[] = {
{.pin = "Headset Mic",.mask = SND_JACK_MICROPHONE,}, {.pin = "Headset Stereophone",.mask = SND_JACK_HEADPHONE | SND_JACK_MECHANICAL |SND_JACK_AVOUT,},+};
+/* 3.5 pie jack detection gpios */ +static struct snd_soc_jack_gpio jack_gpios[] = {
{.gpio = S5PV210_GPH0(6),.name = "DET_3.5",.report = SND_JACK_HEADSET | SND_JACK_MECHANICAL |SND_JACK_AVOUT,.debounce_time = 200,},+};
+static const struct snd_soc_dapm_widget aquila_dapm_widgets[] = {
SND_SOC_DAPM_SPK("Ext Spk", NULL),SND_SOC_DAPM_SPK("Ext Rcv", NULL),SND_SOC_DAPM_HP("Headset Stereophone", NULL),SND_SOC_DAPM_MIC("Headset Mic", NULL),SND_SOC_DAPM_MIC("Main Mic", NULL),SND_SOC_DAPM_MIC("2nd Mic", NULL),SND_SOC_DAPM_LINE("Radio In", NULL),+};
+static const struct snd_soc_dapm_route aquila_dapm_routes[] = {
{"Ext Spk", NULL, "SPKOUTLP"},{"Ext Spk", NULL, "SPKOUTLN"},{"Ext Rcv", NULL, "HPOUT2N"},{"Ext Rcv", NULL, "HPOUT2P"},{"Headset Stereophone", NULL, "HPOUT1L"},{"Headset Stereophone", NULL, "HPOUT1R"},{"IN1RN", NULL, "Headset Mic"},{"IN1RP", NULL, "Headset Mic"},{"IN1RN", NULL, "2nd Mic"},{"IN1RP", NULL, "2nd Mic"},{"IN1LN", NULL, "Main Mic"},{"IN1LP", NULL, "Main Mic"},{"IN2LN", NULL, "Radio In"},{"IN2RN", NULL, "Radio In"},+};
+static int aquila_wm8994_init(struct snd_soc_pcm_runtime *rtd) +{
struct snd_soc_codec *codec = rtd->codec;int ret;/* add aquila specific widgets */snd_soc_dapm_new_controls(codec, aquila_dapm_widgets,ARRAY_SIZE(aquila_dapm_widgets));/* set up aquila specific audio routes */snd_soc_dapm_add_routes(codec, aquila_dapm_routes,ARRAY_SIZE(aquila_dapm_routes));/* set endpoints to not connected */snd_soc_dapm_nc_pin(codec, "IN2LP:VXRN");snd_soc_dapm_nc_pin(codec, "IN2RP:VXRP");snd_soc_dapm_nc_pin(codec, "LINEOUT1N");snd_soc_dapm_nc_pin(codec, "LINEOUT1P");snd_soc_dapm_nc_pin(codec, "LINEOUT2N");snd_soc_dapm_nc_pin(codec, "LINEOUT2P");snd_soc_dapm_nc_pin(codec, "SPKOUTRN");snd_soc_dapm_nc_pin(codec, "SPKOUTRP");snd_soc_dapm_sync(codec);/* Headset jack detection */ret = snd_soc_jack_new(&aquila, "Headset Jack",SND_JACK_HEADSET | SND_JACK_MECHANICAL | SND_JACK_AVOUT,&jack);if (ret)return ret;ret = snd_soc_jack_add_pins(&jack, ARRAY_SIZE(jack_pins), jack_pins);if (ret)return ret;ret = snd_soc_jack_add_gpios(&jack, ARRAY_SIZE(jack_gpios), jack_gpios);if (ret)return ret;return 0;+}
+static int aquila_hifi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)+{
struct snd_soc_pcm_runtime *rtd = substream->private_data;struct snd_soc_dai *codec_dai = rtd->codec_dai;struct snd_soc_dai *cpu_dai = rtd->cpu_dai;unsigned int pll_out = 24000000;int ret = 0;/* set the cpu DAI configuration */ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);if (ret < 0)return ret;/* set the cpu system clock */ret = snd_soc_dai_set_sysclk(cpu_dai, 0, 0, 0);I think that this is not good to write hard-coded parameters.
Ok, I will modify as below codes,
- ret = snd_soc_dai_set_sysclk(cpu_dai, 0, 0, 0); + ret = snd_soc_dai_set_sysclk(cpu_dai, S3C64XX_CLKSRC_PCLK, + 0, SND_SOC_CLOCK_IN);
if (ret < 0)return ret;/* set codec DAI configuration */ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM);if (ret < 0)return ret;/* set the codec FLL */ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, 0, pll_out,params_rate(params) * 256);if (ret < 0)return ret;/* set the codec system clock */ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,params_rate(params) * 256, SND_SOC_CLOCK_IN);if (ret < 0)return ret;return 0;+}
+static struct snd_soc_ops aquila_hifi_ops = {
.hw_params = aquila_hifi_hw_params,+};
+static int aquila_voice_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)+{
struct snd_soc_pcm_runtime *rtd = substream->private_data;struct snd_soc_dai *codec_dai = rtd->codec_dai;unsigned int pll_out = 24000000;int ret = 0;if (params_rate(params) != 8000)return -EINVAL;/* set codec DAI configuration */ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J |SND_SOC_DAIFMT_IB_IF | SND_SOC_DAIFMT_CBM_CFM);if (ret < 0)return ret;/* set the codec FLL */ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL2, 0, pll_out,params_rate(params) * 256);if (ret < 0)return ret;/* set the codec system clock */ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL2,params_rate(params) * 256, SND_SOC_CLOCK_IN);if (ret < 0)return ret;return 0;+}
+static struct snd_soc_dai_driver voice_dai = {
.name = "Voice",.playback = {.channels_min = 1,.channels_max = 2,.rates = SNDRV_PCM_RATE_8000,.formats = SNDRV_PCM_FMTBIT_S16_LE,},.capture = {.channels_min = 1,.channels_max = 2,.rates = SNDRV_PCM_RATE_8000,.formats = SNDRV_PCM_FMTBIT_S16_LE,},+};
+static struct snd_soc_ops aquila_voice_ops = {
.hw_params = aquila_voice_hw_params,+};
+static struct snd_soc_dai_link aquila_dai[] = { +{
.name = "WM8994",.stream_name = "WM8994 HiFi",.cpu_dai_drv = &s3c64xx_i2s_v4_dai,.codec_dai_drv = &wm8994_dai[WM8994_DAI_HIFI],.codec_dai_id = WM8994_DAI_HIFI,.platform_drv = &s3c24xx_soc_platform,.codec_drv = &soc_codec_dev_wm8994,.init = aquila_wm8994_init,.ops = &aquila_hifi_ops,+}, {
.name = "WM8994 Voice",.stream_name = "Voice",.cpu_dai_drv = &voice_dai,.codec_dai_drv = &wm8994_dai[WM8994_DAI_VOICE],.codec_dai_id = WM8994_DAI_VOICE,.platform_drv = &s3c24xx_soc_platform,.codec_drv = &soc_codec_dev_wm8994,.ops = &aquila_voice_ops,+}, +};
+static struct snd_soc_card aquila = {
.name = "aquila",.dai_link = aquila_dai,.num_links = ARRAY_SIZE(aquila_dai),+};
+static int __init aquila_init(void) +{
int ret;if (!machine_is_aquila())return -ENODEV;aquila_snd_device = platform_device_alloc("soc-audio", 0);Really need this allocate as a '0' not "-1"? Is there any reason for?
No, there isn't special reason. I will modify id from '0' to '-1'.
- aquila_snd_device = platform_device_alloc("soc-audio", 0); + aquila_snd_device = platform_device_alloc("soc-audio", -1);
if (!aquila_snd_device)return -ENOMEM;/* register voice DAI here */ret = snd_soc_register_dai(&aquila_snd_device->dev,0, &voice_dai);if (ret)return ret;platform_set_drvdata(aquila_snd_device, &aquila);ret = platform_device_add(aquila_snd_device);if (ret)platform_device_put(aquila_snd_device);return ret;+}
+static void __exit aquila_exit(void) +{
platform_device_unregister(aquila_snd_device);+}
+module_init(aquila_init); +module_exit(aquila_exit);
+/* Module information */ +MODULE_DESCRIPTION("ALSA SoC WM8994 Aquila(S5PC110)"); +MODULE_AUTHOR("Chanwoo Choi cw00.choi@samsung.com");
+MODULE_LICENSE("GPL");
1.6.3.3