From: Nikita Shubin nikita.shubin@maquefel.me
This us a rewrite of EP93xx timer driver in arch/arm/mach-ep93xx/timer-ep93xx.c trying to do everything the device tree way:
- Make every IO-access relative to a base address and dynamic so we can do a dynamic ioremap and get going. - Find register range and interrupt from the device tree.
Reviewed-by: Linus Walleij linus.walleij@linaro.org Tested-by: Alexander Sverdlin alexander.sverdlin@gmail.com Signed-off-by: Nikita Shubin nikita.shubin@maquefel.me --- drivers/clocksource/Kconfig | 11 +++ drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-ep93xx.c | 190 +++++++++++++++++++++++++++++++++++++ 3 files changed, 202 insertions(+)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index c4d671a5a13d..f1b84b05b281 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -739,4 +739,15 @@ config GOLDFISH_TIMER help Support for the timer/counter of goldfish-rtc
+config EP93XX_TIMER + bool "Cirrus Logic ep93xx timer driver" if COMPILE_TEST + depends on ARCH_EP93XX + depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM + select CLKSRC_MMIO + select TIMER_OF + help + Enables support for the Cirrus Logic timer block + EP93XX. + endmenu diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index 5d93c9e3fc55..b6a3cf1f5b9d 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -90,3 +90,4 @@ obj-$(CONFIG_MSC313E_TIMER) += timer-msc313e.o obj-$(CONFIG_GOLDFISH_TIMER) += timer-goldfish.o obj-$(CONFIG_GXP_TIMER) += timer-gxp.o obj-$(CONFIG_CLKSRC_LOONGSON1_PWM) += timer-loongson1-pwm.o +obj-$(CONFIG_EP93XX_TIMER) += timer-ep93xx.o diff --git a/drivers/clocksource/timer-ep93xx.c b/drivers/clocksource/timer-ep93xx.c new file mode 100644 index 000000000000..bc0ca6e12334 --- /dev/null +++ b/drivers/clocksource/timer-ep93xx.c @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cirrus Logic EP93xx timer driver. + * Copyright (C) 2021 Nikita Shubin nikita.shubin@maquefel.me + * + * Based on a rewrite of arch/arm/mach-ep93xx/timer.c: + */ + +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/io-64-nonatomic-lo-hi.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/sched_clock.h> + +#include <asm/mach/time.h> + +/************************************************************************* + * Timer handling for EP93xx + ************************************************************************* + * The ep93xx has four internal timers. Timers 1, 2 (both 16 bit) and + * 3 (32 bit) count down at 508 kHz, are self-reloading, and can generate + * an interrupt on underflow. Timer 4 (40 bit) counts down at 983.04 kHz, + * is free-running, and can't generate interrupts. + * + * The 508 kHz timers are ideal for use for the timer interrupt, as the + * most common values of HZ divide 508 kHz nicely. We pick the 32 bit + * timer (timer 3) to get as long sleep intervals as possible when using + * CONFIG_NO_HZ. + * + * The higher clock rate of timer 4 makes it a better choice than the + * other timers for use as clock source and for sched_clock(), providing + * a stable 40 bit time base. + ************************************************************************* + */ + +#define EP93XX_TIMER1_LOAD 0x00 +#define EP93XX_TIMER1_VALUE 0x04 +#define EP93XX_TIMER1_CONTROL 0x08 +#define EP93XX_TIMER123_CONTROL_ENABLE BIT(7) +#define EP93XX_TIMER123_CONTROL_MODE BIT(6) +#define EP93XX_TIMER123_CONTROL_CLKSEL BIT(3) +#define EP93XX_TIMER1_CLEAR 0x0c +#define EP93XX_TIMER2_LOAD 0x20 +#define EP93XX_TIMER2_VALUE 0x24 +#define EP93XX_TIMER2_CONTROL 0x28 +#define EP93XX_TIMER2_CLEAR 0x2c +/* + * This read-only register contains the low word of the time stamp debug timer + * ( Timer4). When this register is read, the high byte of the Timer4 counter is + * saved in the Timer4ValueHigh register. + */ +#define EP93XX_TIMER4_VALUE_LOW 0x60 +#define EP93XX_TIMER4_VALUE_HIGH 0x64 +#define EP93XX_TIMER4_VALUE_HIGH_ENABLE BIT(8) +#define EP93XX_TIMER3_LOAD 0x80 +#define EP93XX_TIMER3_VALUE 0x84 +#define EP93XX_TIMER3_CONTROL 0x88 +#define EP93XX_TIMER3_CLEAR 0x8c + +#define EP93XX_TIMER123_RATE 508469 +#define EP93XX_TIMER4_RATE 983040 + +struct ep93xx_tcu { + void __iomem *base; +}; + +static struct ep93xx_tcu *ep93xx_tcu; + +static u64 ep93xx_clocksource_read(struct clocksource *c) +{ + struct ep93xx_tcu *tcu = ep93xx_tcu; + + return lo_hi_readq(tcu->base + EP93XX_TIMER4_VALUE_LOW) & GENMASK_ULL(39, 0); +} + +static u64 notrace ep93xx_read_sched_clock(void) +{ + return ep93xx_clocksource_read(NULL); +} + +static int ep93xx_clkevt_set_next_event(unsigned long next, + struct clock_event_device *evt) +{ + struct ep93xx_tcu *tcu = ep93xx_tcu; + /* Default mode: periodic, off, 508 kHz */ + u32 tmode = EP93XX_TIMER123_CONTROL_MODE | + EP93XX_TIMER123_CONTROL_CLKSEL; + + /* Clear timer */ + writel(tmode, tcu->base + EP93XX_TIMER3_CONTROL); + + /* Set next event */ + writel(next, tcu->base + EP93XX_TIMER3_LOAD); + writel(tmode | EP93XX_TIMER123_CONTROL_ENABLE, + tcu->base + EP93XX_TIMER3_CONTROL); + return 0; +} + +static int ep93xx_clkevt_shutdown(struct clock_event_device *evt) +{ + struct ep93xx_tcu *tcu = ep93xx_tcu; + /* Disable timer */ + writel(0, tcu->base + EP93XX_TIMER3_CONTROL); + + return 0; +} + +static struct clock_event_device ep93xx_clockevent = { + .name = "timer1", + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = ep93xx_clkevt_shutdown, + .set_state_oneshot = ep93xx_clkevt_shutdown, + .tick_resume = ep93xx_clkevt_shutdown, + .set_next_event = ep93xx_clkevt_set_next_event, + .rating = 300, +}; + +static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id) +{ + struct ep93xx_tcu *tcu = ep93xx_tcu; + struct clock_event_device *evt = dev_id; + + /* Writing any value clears the timer interrupt */ + writel(1, tcu->base + EP93XX_TIMER3_CLEAR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static int __init ep93xx_timer_of_init(struct device_node *np) +{ + int irq; + unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL; + struct ep93xx_tcu *tcu; + int ret; + + tcu = kzalloc(sizeof(*tcu), GFP_KERNEL); + if (!tcu) + return -ENOMEM; + + tcu->base = of_iomap(np, 0); + if (!tcu->base) { + pr_err("Can't remap registers\n"); + ret = -ENXIO; + goto out_free; + } + + ep93xx_tcu = tcu; + + irq = irq_of_parse_and_map(np, 0); + if (irq == 0) + irq = -EINVAL; + if (irq < 0) { + pr_err("EP93XX Timer Can't parse IRQ %d", irq); + goto out_free; + } + + /* Enable and register clocksource and sched_clock on timer 4 */ + writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE, + tcu->base + EP93XX_TIMER4_VALUE_HIGH); + clocksource_mmio_init(NULL, "timer4", + EP93XX_TIMER4_RATE, 200, 40, + ep93xx_clocksource_read); + sched_clock_register(ep93xx_read_sched_clock, 40, + EP93XX_TIMER4_RATE); + + /* Set up clockevent on timer 3 */ + if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer", + &ep93xx_clockevent)) + pr_err("Failed to request irq %d (ep93xx timer)\n", irq); + + clockevents_config_and_register(&ep93xx_clockevent, + EP93XX_TIMER123_RATE, + 1, + UINT_MAX); + + return 0; + +out_free: + kfree(tcu); + return ret; +} +TIMER_OF_DECLARE(ep93xx_timer, "cirrus,ep9301-timer", ep93xx_timer_of_init);