Then please test everything again. I.e. o speaker-test -D hdmi:CARD=Generic,DEV=0 -c8 -r192000 -F S32_LE
this work fine
o Is there any difference seen with these, in the beginning/end (i.e. fade-out/in): speaker-test -D hdmi:CARD=Generic,DEV=0,AES0=0x04 -c2 -r48000 speaker-test -D hdmi:CARD=Generic,DEV=0,AES0=0x06 -c2 -r48000
I have the same result as before the last fix. AES0=0x04 works AES0=0x06 doesn't. No error is emitted from speaker-test but no sound is coming out speakers.
o Also, is there a difference in the beginning of these (maybe garbage sound and/or slightly slower startup?): aplay -Dhdmi:CARD=Generic,DEV=0,AES0=4 -r44100 -f s16_le -c2 testi.dts.cut.spdif aplay -Dhdmi:CARD=Generic,DEV=0,AES0=6 -r44100 -f s16_le -c2 testi.dts.cut.spdif
no garbage. Maybe slightly slower startup with AES0=0x6.
o Contents of /proc/asound/cardX/eld#0.0
Thanks a lot :)
monitor_present 1 eld_valid 1 monitor_name SC-09TX connection_type HDMI eld_version [0x2] CEA-861D or below edid_version [0x0] no CEA EDID Timing Extension block present manufacture_id 0x2f41 product_id 0x0 port_id 0x10000000005 support_hdcp 0 support_ai 0 audio_sync_delay 0 speakers [0x4f] FL/FR LFE FC RL/RR RLC/RRC sad_count 7 sad0_coding_type [0x1] LPCM sad0_channels 8 sad0_rates [0x1ee0] 32000 44100 48000 88200 96000 176400 192000 sad0_bits [0xe0000] 16 20 24 sad1_coding_type [0x2] AC-3 sad1_channels 6 sad1_rates [0xe0] 32000 44100 48000 sad1_max_bitrate 640000 sad2_coding_type [0x7] DTS sad2_channels 7 sad2_rates [0x6c0] 44100 48000 88200 96000 sad2_max_bitrate 1536000 sad3_coding_type [0xa] E-AC-3/DD+ (Dolby Digital Plus) sad3_channels 8 sad3_rates [0xc0] 44100 48000 sad4_coding_type [0xb] DTS-HD sad4_channels 8 sad4_rates [0x1ec0] 44100 48000 88200 96000 176400 192000 sad5_coding_type [0xc] MLP (Dolby TrueHD) sad5_channels 8 sad5_rates [0x1ec0] 44100 48000 88200 96000 176400 192000 sad6_coding_type [0xe] WMAPro sad6_channels 8 sad6_rates [0x6e0] 32000 44100 48000 88200 96000 sad6_profile 3