From: František Kučera franta-linux@frantovo.cz
Pioneer DJ DJM-250MK2 is a mixer that acts like a USB sound card. The MIDI controller part is standard but the PCM part is "vendor specific". Output is enabled by this quirk: 8 channels, 48 000 Hz, S24_3LE. Input is not working.
Signed-off-by: František Kučera franta-linux@frantovo.cz --- sound/usb/quirks-table.h | 42 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+)
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index d187aa6d50db..dcaf9eed9a41 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3592,5 +3592,47 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } } }, +{ + /* + * Pioneer DJ DJM-250MK2 + * PCM is 8 channels out @ 48 fixed (endpoints 0x01). + * The output from computer to the mixer is usable. + * + * The input (phono or line to computer) is not working. + * It should be at endpoint 0x82 and probably also 8 channels, + * but it seems that it works only with Pioneer proprietary software. + * Even on officially supported OS, the Audacity was unable to record + * and Mixxx to recognize the control vinyls. + */ + USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0017), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 8, // outputs + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 48000 } + } + }, + { + .ifnum = -1 + } + } + } +},
#undef USB_DEVICE_VENDOR_SPEC