From: Simon Shields simon@lineageos.org
Update the never-mainlined "samsung,trats2-audio" binding and instead use the new "samsung,midas-audio" binding.
Signed-off-by: Simon Shields simon@lineageos.org [s.nawrocki: fixed DAPM routing entries for MICBIAS1/2, adjusted to new cpu/codec binding, corrected the regulator nodes indexing] Signed-off-by: Sylwester Nawrocki s.nawrocki@samsung.com --- Changes for v3: - none.
Changes for v2: - reordering to maintain alphabetical order, - corrected the fixed voltage regulator nodes indexing, - whitespace fixes. --- arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 42 +++++++++++++++- arch/arm/boot/dts/exynos4412-i9300.dts | 4 ++ arch/arm/boot/dts/exynos4412-midas.dtsi | 78 ++++++++++++++++++++++++----- arch/arm/boot/dts/exynos4412-n710x.dts | 37 +++++++++++++- 4 files changed, 145 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi index 53b3ca3..89ed81f 100644 --- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi +++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi @@ -33,7 +33,7 @@ }; };
- lcd_vdd3_reg: voltage-regulator-7 { + lcd_vdd3_reg: voltage-regulator-10 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; @@ -42,7 +42,7 @@ enable-active-high; };
- ps_als_reg: voltage-regulator-8 { + ps_als_reg: voltage-regulator-11 { compatible = "regulator-fixed"; regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; @@ -171,6 +171,44 @@ status = "okay"; };
+&sound { + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + "SPK", "SPKOUTRN", + "SPK", "SPKOUTRP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "HDMI", "LINEOUT1N", + "HDMI", "LINEOUT1P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "MICBIAS1", + "IN1LN", "MICBIAS1", + "Main Mic", "MICBIAS1", + + "IN1RP", "Sub Mic", + "IN1RN", "Sub Mic", + + "IN2LP:VXRN", "MICBIAS2", + "Headset Mic", "MICBIAS2", + + "IN2RN", "FM In", + "IN2RP:VXRP", "FM In"; +}; + +&submic_bias_reg { + gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>; + enable-active-high; +}; + &touchkey_reg { gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts index f8125a9..3691802 100644 --- a/arch/arm/boot/dts/exynos4412-i9300.dts +++ b/arch/arm/boot/dts/exynos4412-i9300.dts @@ -20,3 +20,7 @@ reg = <0x40000000 0x40000000>; }; }; + +&sound { + fm-sel-gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 2c8111c..8e7a032 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -102,6 +102,30 @@ status = "disabled"; };
+ vbatt_reg: voltage-regulator-7 { + compatible = "regulator-fixed"; + regulator-name = "VBATT"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + mic_bias_reg: voltage-regulator-8 { + compatible = "regulator-fixed"; + regulator-name = "MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + submic_bias_reg: voltage-regulator-9 { + compatible = "regulator-fixed"; + regulator-name = "SUB_MICBIAS_LDO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -266,16 +290,18 @@ clock-names = "ext_clock"; };
- sound { - compatible = "samsung,trats2-audio"; - samsung,i2s-controller = <&i2s0>; - samsung,model = "Trats2"; - samsung,audio-codec = <&wm1811>; - samsung,audio-routing = - "SPK", "SPKOUTLN", - "SPK", "SPKOUTLP", - "SPK", "SPKOUTRN", - "SPK", "SPKOUTRP"; + sound: sound { + compatible = "samsung,midas-audio"; + model = "Midas"; + mic-bias-supply = <&mic_bias_reg>; + submic-bias-supply = <&submic_bias_reg>; + + cpu { + sound-dai = <&i2s0 0>; + }; + codec { + sound-dai = <&wm1811>; + }; };
thermistor-ap { @@ -597,11 +623,37 @@ wm1811: wm1811@1a { compatible = "wlf,wm1811"; reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; - DCVDD-supply = <&ldo3_reg>; + clocks = <&pmu_system_controller 0>, + <&max77686 MAX77686_CLK_PMIC>; + clock-names = "MCLK1", "MCLK2"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpx3>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH>; + + gpio-controller; + #gpio-cells = <2>; + #sound-dai-cells = <0>; + + wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0 + 0x0 0x8000 0x0 0x0 0x0>; + wlf,micbias-cfg = <0x2f 0x2b>; + + wlf,lineout1-feedback; + wlf,lineout1-se; + wlf,lineout2-se; + wlf,ldoena-always-driven; + + AVDD2-supply = <&vbatt_reg>; DBVDD1-supply = <&ldo3_reg>; + DBVDD2-supply = <&vbatt_reg>; + DBVDD3-supply = <&vbatt_reg>; + DCVDD-supply = <&ldo3_reg>; + CPVDD-supply = <&vbatt_reg>; + SPKVDD1-supply = <&vbatt_reg>; + SPKVDD2-supply = <&vbatt_reg>; wlf,ldo1ena = <&gpj0 4 0>; + wlf,ldo2ena = <&gpj0 4 0>; }; };
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts index 4189e1f..2361d89 100644 --- a/arch/arm/boot/dts/exynos4412-n710x.dts +++ b/arch/arm/boot/dts/exynos4412-n710x.dts @@ -13,7 +13,7 @@
/* bootargs are passed in by bootloader */
- cam_vdda_reg: voltage-regulator-7 { + cam_vdda_reg: voltage-regulator-10 { compatible = "regulator-fixed"; regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; @@ -74,6 +74,41 @@ status = "okay"; };
+&sound { + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + "SPK", "SPKOUTLN", + "SPK", "SPKOUTLP", + + "RCV", "HPOUT2N", + "RCV", "HPOUT2P", + + "HDMI", "LINEOUT1N", + "HDMI", "LINEOUT1P", + + "LINE", "LINEOUT2N", + "LINE", "LINEOUT2P", + + "IN1LP", "MICBIAS2", + "IN1LN", "MICBIAS2", + "Headset Mic", "MICBIAS2", + + "IN1RP", "Sub Mic", + "IN1RN", "Sub Mic", + + "IN2LP:VXRN", "Main Mic", + "IN2LN", "Main Mic", + + "IN2RN", "FM In", + "IN2RP:VXRP", "FM In"; +}; + +&submic_bias_reg { + regulator-always-on; +}; + &touchkey_reg { gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>; status = "okay";